FS: Turbo Setup Part Out for AE92 & 4age Related Parts

truenorican · Postby **truenorican** » Sun Jun 28, 2015 12:21 am

I'm selling a custom turbo piping setup for an AE92. Will come with piping, couplers, and Mishimoto intercooler. There is a fitting that will need to be blocked off if not used. It was suppose to be for the Megasquirt PNP sensor needed to run a MAP setup. To fit, you will need to cut a portion of metal on either side of the radiator. $350

I also have a 2.5 inch downpipe with flex pipe and a v-band setup; the length goes about 3/4 down the exhaust tunnel - $150

Megasquirt PNP (MS DIYPNP V1.5) (unbuilt) will bring hardware to build, plugs to connect to your laptop, sensor for motor to eliminate AFM;- SOLD!

4age ebay turbo manifold - SOLD!

Small T3 Rebuilt Turbo - SOLD!

7MGTE Injectors (All 6) - SOLD!

Tial Wastegate with 7 PSI spring (Installed, never used) - SOLD!

Powdercoated 4age Valve Covers with breather holes and AN fittings - $125

Authentic SARD FPR (Installed for placement, never used) with -6 AN fittings - SOLD!

20 Valve tranny plate to block the front starter hole and open the starter hole in the rear - $40

https://www.dropbox.com/sh/apghi1xvjnop ... 2x-Ka?dl=0

Faster responses through email - t_byron239 at yahoo dot com

4agtee · Postby **4agtee** » Tue Jun 30, 2015 3:40 am

Email sent regarding valve covers.

PDB · Postby **PDB** » Tue Jun 30, 2015 11:29 am

Email sent for injectors please, they are the direct fit 440cc ?

Sent from my iPhone using Tapatalk

truenorican · Postby **truenorican** » Thu Jul 02, 2015 12:30 pm

Wastegate and Injectors SOLD!

truenorican · Postby **truenorican** » Tue Aug 11, 2015 2:05 pm

A bunch of parts sold! Updated list!