FS/TW 4AGTE $3,000 obo
Posted: Thu Nov 13, 2014 6:23 pm
Might be letting this go in the next few months.
- GZE longblock (Rebuilt 1,500miles since rebuild)
- ARP Rod Bolts
- ARP Head studs
ARIAS Pistons (8.6.1) C/R
- 0.8mm metal TRD HG
- Engine Harness (injector connectors setup for 7MGTE 440cc injectors)
- T50 Transmission
- Stage 2 F1 Racing clutch
- Techno Toy Tuning short shifter (already on tranny)
- Intercooler piping already modded to fit the 86 no modification needed (unless you change turbo, intercooler, etc)
- Megasquirt V2.2 dyno tuned (192whp/180tq)
- ISIS T25/T28 hybrid
- NST adj. cam gears
- NST lightweight pulleys
- clear cam gear cover.
- SS autochrome bottom mount mani.
- also have the downpipe modded to clear the steering linkage.
- HKS SSQV IV (real no knockoff stuff)
no cut corners
I probably have a ton more parts in here I can't think of at the moment.
Looking to get $3,000
I've put well over $4-5k into the setup, tons of test fitting, time consuming hours to get this thing done properly, turns on every day, was daily driving it with no issues.
just seeing if there's a buyer interested and we can go from there.
may consider parting out but want to see if someone wants the whole setup first
here's a pic of how it sits in the car, if you have any other questions feel free to send a pm :thumbsup:
- GZE longblock (Rebuilt 1,500miles since rebuild)
- ARP Rod Bolts
- ARP Head studs
ARIAS Pistons (8.6.1) C/R
- 0.8mm metal TRD HG
- Engine Harness (injector connectors setup for 7MGTE 440cc injectors)
- T50 Transmission
- Stage 2 F1 Racing clutch
- Techno Toy Tuning short shifter (already on tranny)
- Intercooler piping already modded to fit the 86 no modification needed (unless you change turbo, intercooler, etc)
- Megasquirt V2.2 dyno tuned (192whp/180tq)
- ISIS T25/T28 hybrid
- NST adj. cam gears
- NST lightweight pulleys
- clear cam gear cover.
- SS autochrome bottom mount mani.
- also have the downpipe modded to clear the steering linkage.
- HKS SSQV IV (real no knockoff stuff)
no cut corners
I probably have a ton more parts in here I can't think of at the moment.
Looking to get $3,000
I've put well over $4-5k into the setup, tons of test fitting, time consuming hours to get this thing done properly, turns on every day, was daily driving it with no issues.
just seeing if there's a buyer interested and we can go from there.
may consider parting out but want to see if someone wants the whole setup first
here's a pic of how it sits in the car, if you have any other questions feel free to send a pm :thumbsup: