Page 5 of 5
Re: Formula Atlantic Race Shop Making Room
Posted: Tue Feb 03, 2015 8:37 am
by oldeskewltoy
Orange Rocket wrote:l2dracing wrote:Just curious if you still have a stock of TRD connecting rods, and if you do, are they set up for a 20mm wrist pin?
Atlantic use 19mm pin
I have a few sets, and I actually do have 2 sets opened up to accept 20mm pins - these are $550, the original sets @ 19mm are $350 I also have a few sets for Mahle pistons, those sets have the 19mm pin, but the width of the small end is narrower
Re: Formula Atlantic Race Shop Making Room
Posted: Thu Mar 05, 2015 1:36 pm
by oldeskewltoy
new style Atlantic covers got 2... $600 each
Re: Formula Atlantic Race Shop Making Room
Posted: Sat Mar 14, 2015 7:18 am
by kp roku ichi
got any ITB set and dry sump conversion set?
Re: Formula Atlantic Race Shop Making Room
Posted: Sat Mar 14, 2015 9:37 am
by oldeskewltoy
kp roku ichi wrote:got any ITB set and dry sump conversion set?
I can check... I've got a few inquires into dry sump conversions.
Re: Formula Atlantic Race Shop Making Room
Posted: Sat Mar 14, 2015 4:02 pm
by kp roku ichi
Great. Keep me posted. thanks
Re: Formula Atlantic Race Shop Making Room
Posted: Thu Mar 19, 2015 2:48 pm
by oldeskewltoy
kp roku ichi wrote:got any ITB set and dry sump conversion set?
I can set you up with a used dry sump pan.... No TRD ITBs, or available dry sump pumps, or other dry sump parts at this time.......
Re: Formula Atlantic Race Shop Making Room
Posted: Tue Mar 31, 2015 8:42 am
by holim
email sent
Re: Formula Atlantic Race Shop Making Room
Posted: Tue Mar 31, 2015 2:27 pm
by oldeskewltoy
holim wrote:email sent
responded.... did you receive it?
Re: Formula Atlantic Race Shop Making Room
Posted: Wed Dec 04, 2019 12:12 pm
by Driverone
Hey. i know this post is really old but did you have Maybe still some parts left?
Re: Formula Atlantic Race Shop Making Room
Posted: Thu Dec 05, 2019 5:57 am
by oldeskewltoy
Driverone wrote:Hey. i know this post is really old but did you have Maybe still some parts left?
all depends... what are you looking for???
Re: Formula Atlantic Race Shop Making Room
Posted: Thu Dec 05, 2019 10:44 am
by binangret
Any FA Valve covers available? Old or New style?
Re: Formula Atlantic Race Shop Making Room
Posted: Thu Dec 05, 2019 12:04 pm
by Driverone
Rods, Pistons And Maybe Strokerparts?
Re: Formula Atlantic Race Shop Making Room
Posted: Wed Dec 11, 2019 8:52 am
by oldeskewltoy
binangret wrote:Any FA Valve covers available? Old or New style?
For now - nothing is available.
Driverone wrote:Rods, Pistons And Maybe Strokerparts?
No stroker parts, as to rods and pistons - they still have some of the old stuff, but for the most part these are odd ball bits. For example they have rods... but none are matched sets as most of what they still have are remainders of engines that went BOOM...
What are you looking for specifically???
Re: Formula Atlantic Race Shop Making Room
Posted: Sat Dec 14, 2019 4:00 pm
by Driverone
It will not be a Highend racing engine. Just a Weekend race. So a good set of conrods would do. And i dont really care About Piston bore size. I Need to bore my block.