Part out: Coupe shell, oem cup holder, EDIS coils, doors, weather stripping, ARP, Momo, Nardi
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Part out: Coupe shell, oem cup holder, EDIS coils, doors, weather stripping, ARP, Momo, Nardi
****ALL prices OBO, text for pictures if you need more.
-Cup holder- $30
-ARP flywheel bolts (set)- $20
-Momo steering wheel- $100
-Personal (Nardi) Steering wheel- $100
-Ford EDIS coils x 4- $50
-Bluetop injectors- $50
-Injector resistor- $15
-Cold start injector-$5
-20 valve TPS pigtail- $5
-Water temp sensor- Sold
Pictures upon request:
-Shell with clean title- $500, includes doors, trunk lid, brake lines, glass, steering column, rear wire harness and remaining odds and ends. You will need a rear end, wheels and front suspension to make it a rolling chassis
-Rear wire harness- $150
-complete heater minus the climate control, includes all under dash venting- $100
-Driver and passenger door weather stripping, near perfect-$75
-Blue cloth rear seat- $100
-Blue kick panels, pair- $50
-Brake hard lines- $50 without proportioning valve
-Blue coupe trunk lid- $75
-Driver door, blue- $50 with glass and regulator, no locks
-Passenger door, blue- $75 with glass and regulator
-All glass available on car- Contact for price
-Window cowl- $25 Pick up only
-Front Side windshield moldings, not top-$20
-Brake shield, pair- $20
-Fuel door, blue with cable- $50
Aisin slave cylinder- $20
-Electric fan 14" (I don't remember the brand but its not a cheap ebay fan that will stop working in a week)-$20
-Blue top ECU- $30
-Crank pulley- Sold
-Power steering reservoir- Sold
-Charcoal canister- Sold
-Distributor heat shield- $10
-AC compressor bracket-Sold
-Spring insulators- Sold
-Heater valve- $10
-Starter plunger-Free with any purchase
-Engine brace- Free with any purchase
-FWD (I think) water pump housing- Free with any purchase
-Exhaust donut- Sold
-Earl's oil cooler- Sold
-1 lateral bar/panhard bushing (Energy)- $5
Air vent cup holder- Free with any purchase
-Fidanza lightweight flywheel (Probably needs new surface plate that can be purchased for $60)- Sold
-Act stage 3 pressure platen just buy a new disc and save money- $25
-Tranny crossmember- $25
All parts located in Redlands CA
Call or text Andrew (909)644-6420
-Cup holder- $30
-ARP flywheel bolts (set)- $20
-Momo steering wheel- $100
-Personal (Nardi) Steering wheel- $100
-Ford EDIS coils x 4- $50
-Bluetop injectors- $50
-Injector resistor- $15
-Cold start injector-$5
-20 valve TPS pigtail- $5
-Water temp sensor- Sold
Pictures upon request:
-Shell with clean title- $500, includes doors, trunk lid, brake lines, glass, steering column, rear wire harness and remaining odds and ends. You will need a rear end, wheels and front suspension to make it a rolling chassis
-Rear wire harness- $150
-complete heater minus the climate control, includes all under dash venting- $100
-Driver and passenger door weather stripping, near perfect-$75
-Blue cloth rear seat- $100
-Blue kick panels, pair- $50
-Brake hard lines- $50 without proportioning valve
-Blue coupe trunk lid- $75
-Driver door, blue- $50 with glass and regulator, no locks
-Passenger door, blue- $75 with glass and regulator
-All glass available on car- Contact for price
-Window cowl- $25 Pick up only
-Front Side windshield moldings, not top-$20
-Brake shield, pair- $20
-Fuel door, blue with cable- $50
Aisin slave cylinder- $20
-Electric fan 14" (I don't remember the brand but its not a cheap ebay fan that will stop working in a week)-$20
-Blue top ECU- $30
-Crank pulley- Sold
-Power steering reservoir- Sold
-Charcoal canister- Sold
-Distributor heat shield- $10
-AC compressor bracket-Sold
-Spring insulators- Sold
-Heater valve- $10
-Starter plunger-Free with any purchase
-Engine brace- Free with any purchase
-FWD (I think) water pump housing- Free with any purchase
-Exhaust donut- Sold
-Earl's oil cooler- Sold
-1 lateral bar/panhard bushing (Energy)- $5
Air vent cup holder- Free with any purchase
-Fidanza lightweight flywheel (Probably needs new surface plate that can be purchased for $60)- Sold
-Act stage 3 pressure platen just buy a new disc and save money- $25
-Tranny crossmember- $25
All parts located in Redlands CA
Call or text Andrew (909)644-6420
Last edited by ethergore2 on Mon Mar 14, 2016 11:41 am, edited 71 times in total.
-
- Club4AG Regular
- Posts: 44
- Joined: Thu Jan 17, 2013 11:17 pm
- Location: Seatac, WA
Re: Complete Part Out
Wow. So much good stuff here.
Interested in both door panels and jdm rear bumper with brackets shipped to 98198
Interested in both door panels and jdm rear bumper with brackets shipped to 98198
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
Nine-Breaker wrote:Wow. So much good stuff here.
Interested in both door panels and jdm rear bumper with brackets shipped to 98198
I'll just ship at cost. Maybe Fedex or greyhound. I'm guessing 50-100 for the bumper. Just text me your offer for parts only and we can work out the rest.
-
- Club4AG Regular
- Posts: 44
- Joined: Thu Jan 17, 2013 11:17 pm
- Location: Seatac, WA
Re: Complete Part Out
I just noticed the door panels are blue so I'll pass on that. But still interested in rear bumper and now coil overs
Re: Complete Part Out
Hello, I am interested in the pair of manual side mirrors for $100. Can you text my number 415-999-6786 the pictures of the sidemirror. What sort of payment do yo accept, I have access to paypal and venmo.
-
- Club4AG Expert
- Posts: 257
- Joined: Sun Feb 03, 2013 2:30 pm
Re: Complete Part Out
PMed about shift knob and maybe wheels.
Re: Complete Part Out
I'm interested in the ITBs, ITG filter and possibly the velocity stacks (waiting to hear back if a guy can make spacers for me). I'll shoot you a PM on Monday once I've heard back on a lead for some other engine bits I'll need.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
Soot wrote:I'm interested in the ITBs, ITG filter and possibly the velocity stacks (waiting to hear back if a guy can make spacers for me). I'll shoot you a PM on Monday once I've heard back on a lead for some other engine bits I'll need.
Just let me know.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
I updated my current parts list. Everything listed is available still. Those of you who are waiting for parts to come off- I am making progress and will let you know as soon as the part you want is off. Thanks
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
Updated some prices to try to get things moving.
-
- Club4AG Enthusiast
- Posts: 99
- Joined: Thu Jan 10, 2013 9:58 pm
Re: Complete Part Out
Pmed about ecu with harness possibly itbs as well
Re: Complete Part Out
Emailed for ITBS, filter, stacks and GE mani.
Re: Complete Part Out
Sent text about underdash harness. 626 536 0066.
-
- Club4AG Enthusiast
- Posts: 70
- Joined: Mon Jan 14, 2013 9:26 pm
- Location: Edmonton Alberta Canada
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
Everything is up to date.
Re: Complete Part Out
dude, so sad to see this go! You never got to enjoy the car!
Anyhow, I'd be interested in the rear calipers as well as the custom catch can. Let me know!
Anyhow, I'd be interested in the rear calipers as well as the custom catch can. Let me know!
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
chohdog wrote:dude, so sad to see this go! You never got to enjoy the car!
Anyhow, I'd be interested in the rear calipers as well as the custom catch can. Let me know!
PM'd
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
Everything is updated. I lowered some prices too.
-
- Club4AG Enthusiast
- Posts: 70
- Joined: Mon Jan 14, 2013 9:26 pm
- Location: Edmonton Alberta Canada
Re: Complete Part Out
Just recieved the items I bought from Andrew.
Great seller to deal with.
Everything was packaged very well.
Great communication
BUMP for a great guy, with great items, at great prices!
Great seller to deal with.
Everything was packaged very well.
Great communication
BUMP for a great guy, with great items, at great prices!
Matt- 83 panda hatch
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
All parts updated. I removed all the sold stuff to make it easier. Just text me for pictures of anything you want.
-
- Club4AG Expert
- Posts: 257
- Joined: Sun Feb 03, 2013 2:30 pm
Re: Complete Part Out
Buy with confidence. Got my stuff and it is awesome. Good guy who worked with me and I appreciate it.
-
- Club4AG Regular
- Posts: 32
- Joined: Sun Aug 18, 2013 6:51 pm
Re: Complete Part Out
Thanks for all the parts bump for a legit seller
Re: Complete Part Out
do you have the climate control assembly and a good working headlight switch?
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
patobo wrote:do you have the climate control assembly and a good working headlight switch?
Sorry. No longer available.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: ITB adapter, 1 piece drive shaft, EDIS coils, misc
More parts added
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Complete Part Out
patobo wrote:do you have the climate control assembly and a good working headlight switch?
The buyer backed out so I do have this available. Text me.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more
List updated. Thanks for looking.
-
- Club4AG Regular
- Posts: 32
- Joined: Thu Jul 23, 2015 3:06 pm
Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more
I'm interested in the Aisin slave if it comes with the line as well ?
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA
Re: Part out: ITB adapter, 1 piece drive shaft, complete interior, more
Sctjaramillo wrote:I'm interested in the Aisin slave if it comes with the line as well ?
It does. Send me a text.
-
- Club4AG Enthusiast
- Posts: 137
- Joined: Sat Jan 19, 2013 4:30 pm
- Location: CA