AJPS contact information needed.

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

AJPS contact information needed.

Postby The Bloody Panda » Sun Jan 12, 2014 5:29 pm

Anybody got any contact information for AJPS? A phone number would be amazing. I can't get a hold of David Lawson, he sold me some bad parts and told me he'd refund me but hasn't and now I can't reach him via email.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
GEOVA TRD
Club4AG Expert
Posts: 210
Joined: Thu Jan 17, 2013 1:21 pm
Location: WI

Re: AJPS contact information needed.

Postby GEOVA TRD » Sun Jan 12, 2014 5:51 pm

Hope u get this resolved! :(

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Sun Jan 12, 2014 6:42 pm

Thanks a lot man. I hope so too. I hope things are going excellent for you.

marley4us
Club4AG Expert
Posts: 412
Joined: Fri Jan 11, 2013 10:40 pm
Location: milpitas

Re: AJPS contact information needed.

Postby marley4us » Mon Jan 13, 2014 8:24 pm

I was about to buy rca... what did you get that was bad?
1985 Corolla Hatch widebody w/ SR20det (The Project)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


marley4us
Club4AG Expert
Posts: 412
Joined: Fri Jan 11, 2013 10:40 pm
Location: milpitas

Re: AJPS contact information needed.

Postby marley4us » Mon Jan 13, 2014 8:24 pm

I was about to buy rca... what did you get that was bad?
1985 Corolla Hatch widebody w/ SR20det (The Project)
1993 5SGTE stroker widebody MR2 Turbo (drag car)
2002 Miata SE hardtop (daily Driver)
1994 4runner (The truck)

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Tue Jan 14, 2014 9:49 am

I got some spaced inner tie rods that were spaced too much. They're spaced to the point that the rack runs out of teeth before hitting the bump stop on the driver's side. I got a hold of him yesterday and we're in the process of working it out.

User avatar
GEOVA TRD
Club4AG Expert
Posts: 210
Joined: Thu Jan 17, 2013 1:21 pm
Location: WI

Re: AJPS contact information needed.

Postby GEOVA TRD » Tue Jan 14, 2014 10:13 am

The Bloody Panda wrote:Thanks a lot man. I hope so too. I hope things are going excellent for you.


Things are GREAT!Except for all this damn snow!!!

Take care amigo... ;)

JapaneseDeman
Club4AG Enthusiast
Posts: 61
Joined: Fri Jan 11, 2013 10:12 pm

Re: AJPS contact information needed.

Postby JapaneseDeman » Tue Jan 14, 2014 10:29 am

ive been kinda wondering about them as well. I've written AJPS multiple emails in the past month, and not a single reply. anyone know if they're still on holiday or whatnot?

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Tue Jan 14, 2014 12:28 pm

GEOVA TRD wrote:
The Bloody Panda wrote:Thanks a lot man. I hope so too. I hope things are going excellent for you.


Things are GREAT!Except for all this damn snow!!!

Take care amigo... ;)


All our snow finally melted. The worst was that cold, -35 with wind chill is so cold it's ridiculous.

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Tue Jan 14, 2014 12:30 pm

JapaneseDeman wrote:ive been kinda wondering about them as well. I've written AJPS multiple emails in the past month, and not a single reply. anyone know if they're still on holiday or whatnot?


They're definitely available, but quite slow with the responses, resolutions, and orders. When the product is right I have no complaints, I've only seen high quality stuff. However, I've only ordered one thing, and though it was wrong I could tell it would have been real nice if it was right.

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Thu Jan 23, 2014 12:51 pm

My parts are on the way. I think they should arrive mid to late next week. I'll update after I verify whether these replacement tie rods are made to proper specs or not.

There was quite a bit of a delay on AJPS mailing them since there was one day last week where they were the hottest city in the world. I looked into it and they've been having quite a long heat wave there. The owner said that it was simply too hot for them to go to work.

Lucifer D
Posts: 4
Joined: Fri Jan 11, 2013 10:38 pm

Re: AJPS contact information needed.

Postby Lucifer D » Sat Feb 01, 2014 11:35 pm

Speaking in support to Dave,
Yes it has been ridiculously hot here in Adelaide.

I don't think his workshop has air conditioning either so would have been rather uncomfortable.

I have never had an issues with his service or parts fitment, and have always received professional service.

All the best with your project and happy sliding/driving!

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Sat Feb 01, 2014 11:41 pm

I got the replacement inner tie rods but haven't verified if these ones are correct since I've been too busy. I bet these ones will be good though.

The Bloody Panda
Club4AG Expert
Posts: 345
Joined: Mon Jan 14, 2013 10:05 pm

Re: AJPS contact information needed.

Postby The Bloody Panda » Thu Feb 06, 2014 9:32 pm

The replacements that AJPS sent me are good. These ones are machined correctly to only a 6mm spacing and cause no problems with the steering rack.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “AE86 Parts & Accessories”

Who is online

Users browsing this forum: Google Adsense [Bot] and 6 guests