Short stroke strut service
Short stroke strut service
Custom short stroke set ups have long been the preferred setup for AE86 enthusiasts due to the fact that you have the choice to mix and match dampers and spring rates to get the set up that will work best for your application. I am offering the service of modifying your OEM strut casings in order to run a short stroke/coilover setup. All welds are TIG welded by hand. Located in the Los Angeles area, shipping available at customers expense.
Contact through e-mail for fastest response breezefabrication@gmail.com
Price structure breaks down as follows
• $160 - Short stroke conversion - Strut casings shortened 40mm unless otherwise specified, stock spring perch cut off and new spring perch to support coil over welded on.
• $50 - Disassembly – Removal of stock spring, upper spring seat, damper and oil disposal.
• $50 - Cleaning and stripping – Removal of all the gunk/oils on the casings and stripping of the paint.
• $50 - Paint – Primer coat and 3 coats of high temp low gloss black.
• $20-Aluminum spacers -Pair
• $80 –Assembly (pair) – Complete assembly of high hats, strut insert (aluminum spacer included) and coil over sleeve. You must supply parts for assembly.
******POWDER COATING is now available*******
Contact through e-mail for fastest response breezefabrication@gmail.com
Price structure breaks down as follows
• $160 - Short stroke conversion - Strut casings shortened 40mm unless otherwise specified, stock spring perch cut off and new spring perch to support coil over welded on.
• $50 - Disassembly – Removal of stock spring, upper spring seat, damper and oil disposal.
• $50 - Cleaning and stripping – Removal of all the gunk/oils on the casings and stripping of the paint.
• $50 - Paint – Primer coat and 3 coats of high temp low gloss black.
• $20-Aluminum spacers -Pair
• $80 –Assembly (pair) – Complete assembly of high hats, strut insert (aluminum spacer included) and coil over sleeve. You must supply parts for assembly.
******POWDER COATING is now available*******
Last edited by seymour86 on Sat Aug 26, 2017 12:16 pm, edited 9 times in total.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
Just bought a new torch, Itching to burn some rod.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
-
- Club4AG Enthusiast
- Posts: 142
- Joined: Sat Jan 12, 2013 12:38 pm
- Location: Socal 909
Re: Short stroke strut service
Buy his service!
1st place at Toyotafest 2012 and 2nd place at JCCS 2012.
Re: Short stroke strut service
Bump
Thanks Luis! you make it out to JCCS this year?
Thanks Luis! you make it out to JCCS this year?
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
end of the week bump.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
At least from the photos attached, this guy's work looks fantastic. For those of you who think that the only thing available are the Chinese brands, this guy can get you started on a real nice coilover system. Plus, you can service/choose the shock yourself! Yet another option on great AE86 suspension.
Re: Short stroke strut service
Looks great!
Do you have some ideas how I can check my hub/spindle for good health when I am finding a core to use?
Do you have some ideas how I can check my hub/spindle for good health when I am finding a core to use?
Re: Short stroke strut service
chohdog wrote:At least from the photos attached, this guy's work looks fantastic. For those of you who think that the only thing available are the Chinese brands, this guy can get you started on a real nice coilover system. Plus, you can service/choose the shock yourself! Yet another option on great AE86 suspension.
Thank you sir. You've been in the game for a long while and you know your stuff from what I have read in your posts over the years,so those word mean a lot to me.
Stock4AG wrote:Looks great!
Do you have some ideas how I can check my hub/spindle for good health when I am finding a core to use?
I look where the top of the spindle base and tube meet for chipped paint or stretched metal. Usually the first thing to bend on the front suspension set up is the steering knuckles, So when I pull cores from the junk yards I look at those before I even touch them with a wrench. Make sure strut inserts fit in to the casing. If the tubing is bent the inserts or 1.75" tubing will have a little more friction going in or will not go in at all. Also make sure that the threads on the top that the gland nut screws into is good.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
Ha Ha kicking it old school
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
-
- Club4AG Expert
- Posts: 234
- Joined: Fri Jan 18, 2013 8:01 am
Re: Short stroke strut service
Bump for a good seller. On time and professional.
Re: Short stroke strut service
Thanks Kendall,It was nice meeting you and I look forward to seeing your car when it is all done.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
-
- Club4AG Expert
- Posts: 418
- Joined: Wed Jan 09, 2013 9:16 pm
Re: Short stroke strut service
Beautiful welds
Silver/Black 1985 ae86 gts Heavens Gate Corolla
2001 Carbon Black e39 M5
89' Supra Twin Turbo 1JZ (sold)
2001 Carbon Black e39 M5
89' Supra Twin Turbo 1JZ (sold)
- 350nizmo
- Club4AG Expert
- Posts: 293
- Joined: Wed Jan 09, 2013 5:06 pm
- Location: SouthEast (Loganville, GA 30052)
Re: Short stroke strut service
sent you an email
1986 Toyota Corolla AE86 Apex GT RHD (Garage Queen)
2007 Honda Fit Sport (Daily)
2007 Honda Fit Sport (Daily)
Re: Short stroke strut service
Sent you an email regarding service.
-Edward
-Edward
Re: Short stroke strut service
Email sent
Re: Short stroke strut service
sorry guys, been super crazy at my day job. Looks to be super crazy up too the 31st of Dec.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
pm sent