F20 Turbo Swap "Drop In and Drive!"
This swap came off a Formula DRIFT AE86, made 500 hp and 400 trq on E85, after just one event the engine was tore down and rebuilt with several internal upgrades:



- New HONDA bearings and rings
- New ARP head studs
- New SUPERTECH all new head valve train
- New COMETIC 3mm headgasket WITH REMOVAL OF HEAD GASKET THIS SWAP EASILY BECOMES NA I have all of the NA exhaust parts as well!!


Tons of Custom Fabricated Parts

- JSP oil pan for AE86 clearance, engine mounts (engine side), custom cross member (Formula DRIFT legal), custom radiator for F20 swap (outlets moved to crossflow), custom engine harness, chassis harness, cluster mount, driveshaft,
- Erick's Racing PCV block off, modified rubber mounts for bottom mount turbo, custom exhaust header, down pipe w/ v-band, full 3 inch exhaust, custom BOV and wastegate pipes, intercooler
- Custom water lines, even after all the fabrication there are always little issues which need to be worked out, these have already been taken care of for you!!!




*my trusty SPAL fan not included (<3 that thing!!)













Tons of Performance Parts

- GARRET GT35/82 turbo (1 event)
- TIAL BOV (1 event)
- TIAL waste gate (1 event)
- RC ENGINEERING 1200cc injectors (1 event) suggested for E85
- New AEM wideband (spare)
- AEM (1 event ALL): boost controller (communicates w/ ecu), wideband, air-fuel gauge digital, fuel filter, fuel rail, fuel psi gauge
- MUGEN thermostat and fan controller
- ACT Streetlight flywheel, stage 2 clutch








OEM HONDA Parts

- Gauge cluster
- Clutch slave w/ line
- AP2 transmission (the good one because AP1 sucks)
- alternator, starter

I APOLOGIZE THERE ARE A BUNCH OF EXTRA GOODIES I DIDN'T LIST


Thanks for looking, Carlos

text 818-903-2916
e-mail cce.motorsports@gmail.com

$5,500 mega lowballers will be dowsed in gasoline, just parts alone add up to over $6K, then fabrication etc..

Wow I'm kinda bummed I have close to 3 grand in my motor that gives me around 120hp.

this is a killer deal! you cant get a stock f20c motor, trans, and dash for that cheap! let along all the extra componants to make it work!!!

is this everything u need to swap in 100% nothing else u need to buy?

All you would need is an ECU, I have an AEM V2 with the maps already loaded...I want to keep it for my Toyota V8 but am willing to sell it as well...or at least load my maps onto a new ECU for a small fraction of what tuning would cost

What a bargain ! Glws

Want this, like fat boy wants twinkies.
Bump for U!

thats the best deal in swaps ever. if school wasnt so expensive i would of boughten it uhhhhhhggggg

Is there paper work on shop that rebuilt it . Interested as NA setup but not trying to buy another bad motor of this forum =/

The motor was assembled at Erick's Racing Engines, who proudly stand behind their work and have been building F motors since they were still new. I have receipts for all the parts which I purchased and can arrange a meeting with the mechanics, fabricators, and engine builders involved with this set-up if necessary.

Thanks again for the love guys, I am happy to see that the culture of our beloved club4ag has changed for the better.

Came in my pants at WORK!!!

Waiting on your on

*pm

If you decide to part out, can you please let us know?

You have a number of things I'd want. Wire harnesses, oil pan, crossmember for instance.

Otherwise, glws. Great deal.

Just responded to pm's and if I don't believe I'll be parting out but we'll see...you never know

Man, I just bought an f20c NA swap for about $6k, this is a goooood deal. GLWS sir! I'm sure it'll sell quick!

Where u located? Assuming LAish considering the 818...