fs MI: ca18 kit, t3 shifter, race suit, gts rear end
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
fs MI: ca18 kit, t3 shifter, race suit, gts rear end
I'm clearing out as much of my stuff as I can.
Selling my 20v:
$300: Head and block ITBS/waterlines etc sold
$800: Stinger EMS + Wiring (I'll include some instructions for install)
Tuned at Drift Office. It's tuned for my silvertop 20v engine, open itbs, made 134rwhp on a dyno w. stock exhaust so the #'s should be a little higher w. an aftermarket one. It's set up to run off the distributer as a trigger wheel (no dist. cap needed), so you don't need to pound out your firewall.
$200: CA18DET to AE86 kit
Made by flipside customs. $500 with driveshaft
also have
FREE: Passenger door (gutted track car) It does have door hinges
FREE: windshield wiper motor + linkages
FREE: SR5 kouki cluster
$250: GTS rear end - no brakes, whining ring gear
SOLD: ITBS w. velocity stacks
SOLD: 20v Waterline kit
SOLD: Good T50 trans no grinds or anything
SOLD: RX7 FC calipers
SOLD: OBX 16v exhaust header
SOLD: spare T50 grinds 2nd
SOLD: gts driveshaft
SOLD: T3 short shifter (no shift knob)
SOLD: brand new large black sparco jade racing suit. I'm buying a medium instead.
Thanks for looking. Send me offers!
Selling my 20v:
$300: Head and block ITBS/waterlines etc sold
$800: Stinger EMS + Wiring (I'll include some instructions for install)
Tuned at Drift Office. It's tuned for my silvertop 20v engine, open itbs, made 134rwhp on a dyno w. stock exhaust so the #'s should be a little higher w. an aftermarket one. It's set up to run off the distributer as a trigger wheel (no dist. cap needed), so you don't need to pound out your firewall.
$200: CA18DET to AE86 kit
Made by flipside customs. $500 with driveshaft
also have
FREE: Passenger door (gutted track car) It does have door hinges
FREE: windshield wiper motor + linkages
FREE: SR5 kouki cluster
$250: GTS rear end - no brakes, whining ring gear
SOLD: ITBS w. velocity stacks
SOLD: 20v Waterline kit
SOLD: Good T50 trans no grinds or anything
SOLD: RX7 FC calipers
SOLD: OBX 16v exhaust header
SOLD: spare T50 grinds 2nd
SOLD: gts driveshaft
SOLD: T3 short shifter (no shift knob)
SOLD: brand new large black sparco jade racing suit. I'm buying a medium instead.
Thanks for looking. Send me offers!
Last edited by w.tungsten on Sun Mar 03, 2013 11:46 am, edited 7 times in total.
Re: Back again! 20v stuff, ca18 kit,
Are you selling the head and block combined for $300? Are they disassembled from each other? Does it include all the coils and accessories?
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
yes head and block. assembled. no accessories, no coils
head water outlets have been modified to fit RWD application
head water outlets have been modified to fit RWD application
Re: Back again! 20v stuff, ca18 kit,
pm'ed yuou about the short shifter dude!
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
I'm not sure why but I can't respond to your PM. Yeah throw me an offer.
Michael DOT f DOT tung AT gmail.com
Michael DOT f DOT tung AT gmail.com
- Spoold86
- Club4AG Enthusiast
- Posts: 131
- Joined: Sun Jan 13, 2013 3:40 am
- Location: Wilsonville OR
- Contact:
Re: Back again! 20v stuff, ca18 kit,
I'll buy your obx headers if you're willing to ship to so cal
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
yes i am willing to ship to socal. email me
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
bump!
pending sale on the headers
pending sale on the headers
Re: Back again! 20v stuff, ca18 kit,
you still got the Stinger EMS + Wiring? will it include the distributor and coil on plugs? and how much to ship it to southern california... if so, im interested in buying... email me at maviveros88@yahoo.com or txt me at 909.782.5992
thanks,
thanks,
Re: Back again! 20v stuff, ca18 kit,
are you willing to ship the t50 that grinds in 2nd gear?
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
Hi guys yes I'm willing to ship both. Karma ill email you.
Where would the trans be going? It does not have a bellousing on it btw.
Pending sale on CA18 mounts, still waiting for payment on the obx headers.
Where would the trans be going? It does not have a bellousing on it btw.
Pending sale on CA18 mounts, still waiting for payment on the obx headers.
Re: Back again! 20v stuff, ca18 kit,
w.tungsten wrote:Where would the trans be going? It does not have a bellousing on it btw.
Texas 77584
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
$50 for shipping sound reasonable?
- death_blossom
- Club4AG Enthusiast
- Posts: 59
- Joined: Thu Jan 10, 2013 10:36 pm
- Location: Vancouver, BC (Canada)
Re: Back again! 20v stuff, ca18 kit,
interested in your headers! how much to ship to Vancouver, BC? or better yet, would you hold onto the headers if I PayPal'd you first? I'm out of town at the moment, but can come to Seattle in Feb to pick it up!
location: Vancouver, BC (Canada)
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
Oh these are in Ann Arbor, MI. I'll ship to Vancouver though no prob. +$30 for shipping sound good?
Re: Back again! 20v stuff, ca18 kit,
what is missing from that ca18det kit.
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
It's just the motor mounts and transmission mount. No driveshaft.
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
Seat rails and headers are sold
Re: Back again! 20v stuff, ca18 kit,
w.tungsten wrote:It's just the motor mounts and transmission mount. No driveshaft.
So it doesn't come with the turbo downpipe starter, turbo relocator or the cold side turbo flange?
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
bummer, not a bad price for those. glws!
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
***EDIT see first page for updated prices-
Last edited by w.tungsten on Thu Feb 21, 2013 12:09 pm, edited 1 time in total.
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
throw me some offers!
I also have a GTS rear end. no brake calipers, no ebrake cables, welded diff, ring gear needs to be reset.
$250
I also have a GTS rear end. no brake calipers, no ebrake cables, welded diff, ring gear needs to be reset.
$250
-
- Club4AG Enthusiast
- Posts: 77
- Joined: Fri Jan 11, 2013 5:30 pm
- Location: Miramar Florida (Broward County)
Re: Back again! 20v stuff, ca18 kit,
pm send for the whole motor
-
- Posts: 8
- Joined: Tue Feb 05, 2013 7:51 pm
Re: Back again! 20v stuff, ca18 kit,
interested in the spare t50 you got for sale. how much would shipping be to 77084 houston texas? please let me know
-
- Club4AG Enthusiast
- Posts: 77
- Joined: Fri Jan 11, 2013 5:30 pm
- Location: Miramar Florida (Broward County)
Re: Back again! 20v stuff, ca18 kit,
!
Last edited by UH-72 Lakota on Tue Feb 12, 2013 12:04 am, edited 1 time in total.
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
Motor still for sale.
I also have a brand new Sparco Jade racing suit. Black, Large. I only test fit it on my and it's too big.
$240
I also have a brand new Sparco Jade racing suit. Black, Large. I only test fit it on my and it's too big.
$240
-
- Posts: 9
- Joined: Thu Feb 07, 2013 11:17 pm
Re: Back again! 20v stuff, ca18 kit,
Pm about tranny and do you have original ecu your stand alone is really nice but out of my price range
But no matter the case my 4age 16v needs s tranny to swapp into my 77 celica gt liftback
But no matter the case my 4age 16v needs s tranny to swapp into my 77 celica gt liftback
-
- Posts: 9
- Joined: Thu Feb 07, 2013 11:17 pm
Re: Back again! 20v stuff, ca18 kit,
If its still available Shipping to 83714
-
- Club4AG Enthusiast
- Posts: 93
- Joined: Wed Jan 09, 2013 3:04 pm
- Location: Ann Arbor, MI
Re: Back again! 20v stuff, ca18 kit,
I don't have the stock ECU
Also the trans I have left is the one that grinds second gear. No Bellhousing. So it might not be worth it for you. $50 + $100 shipping.
Also the trans I have left is the one that grinds second gear. No Bellhousing. So it might not be worth it for you. $50 + $100 shipping.