Exterior Stuff:
AE86 Smoked LED Crystal Tail lights for Hatch - $150

Suspension/Foot work stuff:
1 set of Xcessive Manufacturing Spring Seats (brand new, unused) - $130 each set
Xcessive manufacturing sway bar mounts -$25
Xcessive Manufacturing Panhard Mount - $15
Eibach Race Front Coilover Spring 7.1kg with top hats - $100
Stance rear springs from coilover kit (6kg no perches) - $60

Fueling/Engine/Transmission stuff:
Smallport 16V with 24-1 distributor, small port valve cover, LS2 coils, MSD coil plugs, Tomei Cam Gears, Vacuum block, supra 305cc injectors - $1300
Small Port intake modified for RWD - $150
T50 Transmission (No Bellhousing) - $200
(4) 3SGE Beams injectors (rated 365cc, high impedance) - $70
4AGE Large Port intake Manifold - $40
NEW KEconversions 1UZ to Ae86 mount kit (Engine Mount, Transmission Mount, Subframe Spacers, NOT A SOLID MOUNTED KIT) - $150
NEW VMS Vacuum Manifold - $35
NEW CUBE W58 Short Shifter $130
Espelir UNDERDIFF exhaust - $150
Innovate MTX-L WideBand w/ O2 sensor - $130
NEW LubeLocker differential sea for Ford 8.8 - $20
NOS AE86 TRD Engine Mounts - $150

Interior bits:
Lots of random pieces. If you're looking for something in particular, please ask. I have things from rear seats, to front dash panels and the like.

AE86 Rear T3 Firewall Coupe Cover Brand new (No Hardware) - $70
BRIDE LowMAX Seat (Probably not real, fabric is fading, Passenger Buddy Club Seatrail INCLUDED) - $180
Black Glove Box - $40

Any pics of the fitment of the T3 Rear Firewall Cover?

Do you have door panels for a coupe

Hi. Interested in rear interior pieces for hatch. Mainly rear seat side trim cards or speaker pods. Thanks

I'm looking for a radio bezel and driver side door card/panel.

Where are you located?

hi, i might be interested in your "Small Port intake modified for RWD - $150"
can i get some pics? also, where are you lcoated? thanks.

Pm'ed you about the exhaust.

any pics of the fitment of the T3 rear firewall cover?

Hi, do you have an intermediate shaft for a powered steering rack?

Have oem shift knob by any chance?

badboy88000 wrote:Exterior Stuff:
AE86 Smoked LED Crystal Tail lights for Hatch - $150

Suspension/Foot work stuff:
1 set of Xcessive Manufacturing Spring Seats (brand new, unused) - $130 each set
Xcessive manufacturing sway bar mounts -$25
Xcessive Manufacturing Panhard Mount - $15
Eibach Race Front Coilover Spring 7.1kg with top hats - $100
Stance rear springs from coilover kit (6kg no perches) - $60

Fueling/Engine/Transmission stuff:
Smallport 16V with 24-1 distributor, small port valve cover, LS2 coils, MSD coil plugs, Tomei Cam Gears, Vacuum block, supra 305cc injectors - $1300
Small Port intake modified for RWD - $150
T50 Transmission (No Bellhousing) - $200
(4) 3SGE Beams injectors (rated 365cc, high impedance) - $70
4AGE Large Port intake Manifold - $40
NEW KEconversions 1UZ to Ae86 mount kit (Engine Mount, Transmission Mount, Subframe Spacers, NOT A SOLID MOUNTED KIT) - $150
NEW VMS Vacuum Manifold - $35
NEW CUBE W58 Short Shifter $130
Espelir UNDERDIFF exhaust - $150
Innovate MTX-L WideBand w/ O2 sensor - $130
NEW LubeLocker differential sea for Ford 8.8 - $20
NOS AE86 TRD Engine Mounts - $150

Interior bits:
Lots of random pieces. If you're looking for something in particular, please ask. I have things from rear seats, to front dash panels and the like.

AE86 Rear T3 Firewall Coupe Cover Brand new (No Hardware) - $70
BRIDE LowMAX Seat (Probably not real, fabric is fading, Passenger Buddy Club Seatrail INCLUDED) - $180
Black Glove Box - $40

Do you have photos of the black glove box? Do you have any fenders, hood, trunk hatch gate? Send me a PM

Rear gts seats?