Rondo Bar?

ras0ne
Club4AG Regular
Posts: 42
Joined: Thu Jan 10, 2013 8:49 am

Rondo Bar?

Postby ras0ne » Thu Jan 24, 2013 9:59 am

Does anyone remember from the the old forum the name of that bar you can bolt on the front, it looked kind of like a bash bar.

There was a guy making them and he made a rear bumper one also.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
daveskatesallday
Club4AG Expert
Posts: 499
Joined: Thu Jan 10, 2013 10:35 pm

Re: Rondo Bar?

Postby daveskatesallday » Thu Jan 24, 2013 10:09 am

yep it's called a Rondell bar the ppl making them were in Canada if i remember correctly
Voici mon secret. Il est très simple: on ne voit bien qu'avec le cœur. L'essentiel est invisible pour les yeux.

corollafrs
Club4AG Enthusiast
Posts: 95
Joined: Fri Jan 11, 2013 1:19 pm

Re: Rondo Bar?

Postby corollafrs » Thu Jan 24, 2013 10:25 am

SWANGBIZ in palm springs were making them, but i havent seen them come back to the forums to promote yet. I know they were out of stock the last time i checked.

ras0ne
Club4AG Regular
Posts: 42
Joined: Thu Jan 10, 2013 8:49 am

Re: Rondo Bar?

Postby ras0ne » Thu Jan 24, 2013 10:29 am

That's it!

Thanks

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
EJ86
Club4AG Expert
Posts: 465
Joined: Thu Jan 10, 2013 10:45 pm
Location: Las Vegas, Nevada
Contact:

Re: Rondo Bar?

Postby EJ86 » Thu Jan 24, 2013 10:40 am

-1985 Toyota Corolla GTS (2door)
http://www.cardomain.com/ride/561054
-2004 Nissan Frontier (King Cab):
http://www.cardomain.com/ride/3072528

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Rondo Bar?

Postby HASport AE86 » Thu Jan 24, 2013 8:09 pm

That pic is actually not one of ours. We will be doing another bar group buy in the next two weeks or so. We are building bars as I speak. Iirc we will have about 6 front and 4 rear and some new rear strut bars.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions

User avatar
Grant
Club4AG Expert
Posts: 388
Joined: Wed Jan 09, 2013 8:42 pm
Location: Upstate New York

Re: Rondo Bar?

Postby Grant » Thu Jan 24, 2013 9:39 pm

Do these bars go underneath bumpers, or are they the bumper?

my86mystory
Club4AG Enthusiast
Posts: 193
Joined: Thu Jan 10, 2013 12:01 pm
Location: Socal

Re: Rondo Bar?

Postby my86mystory » Thu Jan 24, 2013 9:46 pm

To grant... these take the place of the brackets. So they go behind the skin of the bumper like the real brackets

User avatar
Grant
Club4AG Expert
Posts: 388
Joined: Wed Jan 09, 2013 8:42 pm
Location: Upstate New York

Re: Rondo Bar?

Postby Grant » Thu Jan 24, 2013 9:51 pm

Ah okay, so these are for use with non USDM bumpers right? Since the USDM ones have that big shock absorber.

my86mystory
Club4AG Enthusiast
Posts: 193
Joined: Thu Jan 10, 2013 12:01 pm
Location: Socal

Re: Rondo Bar?

Postby my86mystory » Thu Jan 24, 2013 10:54 pm

That is correct.For use with jdm bumpers

abrahamc.1987
Club4AG Enthusiast
Posts: 57
Joined: Thu Jan 10, 2013 9:58 pm
Location: north san diego/ escondido

Re: Rondo Bar?

Postby abrahamc.1987 » Fri Jan 25, 2013 1:49 am

Vouching for dan on these bars. I got me a front and rear and would like to get some more if possible. Hope they keep getting produced later down the line if I can't get on this next batch. Thanx again for the bars dan, really appreciate it.

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Rondo Bar?

Postby HASport AE86 » Fri Jan 25, 2013 8:46 am

Image

They are for JDM front and rear bumpers. 100% bolt on. No cutting no welding no bull. $250 front $200 rear. We are making more right now. Should be ready in like two weeks.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions

Deuce Cam
Posts: 1347
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: Rondo Bar?

Postby Deuce Cam » Fri Jan 25, 2013 12:01 pm

Do you have a pics of the rear fitment with oem kouki bumper?

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Rondo Bar?

Postby HASport AE86 » Fri Jan 25, 2013 4:19 pm

Deuce Cam wrote:Do you have a pics of the rear fitment with oem kouki bumper?


I have to look around for the pic but i'll post it up asap. The center of the pic here is the rear bars tabbed for kouki. The server crash has messed with a lot of things, I lost a ton of info/pics. I want to do a version 2 of the rear bars as well that will wrap around the side of the rear but it will require cutting into the quarter panel behind the bumper. Not everyone is down for that. Big thangs 2013. I'm buried in wiring harnesses right now, but my friends and I are rushing to get these done for tax season. So hold on to those returns.

This next group buy look for:
-Kouki tabbed front and rear bash bars (w/ version 2 option)
-Zenki tabbed front and rear bash bars (w/ version 2 option)
-Rear tri brace for hatchback models
-Rear strut tri brace for coupe and hatch models (the prototype is on my car right now, pics soon)
-Panhard brace for chassis panhard mount to prevent bending the mount dirt dropping

Image
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions

gaijin_rokurunner
Club4AG Pro
Posts: 511
Joined: Wed Jan 09, 2013 5:51 pm
Location: PA

Re: Rondo Bar?

Postby gaijin_rokurunner » Fri Jan 25, 2013 5:58 pm

Any plan to make some that fit zenki bumpers?
20v power.....powered by Orion's Demise!
Image

NOKsk8er
Club4AG Regular
Posts: 39
Joined: Mon Jan 14, 2013 5:34 pm
Location: SF

Re: Rondo Bar?

Postby NOKsk8er » Sat Jan 26, 2013 5:55 am

will this work if you already have jdm bumper brackets?!
Image
RIP

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Rondo Bar?

Postby HASport AE86 » Sat Jan 26, 2013 9:11 am

gaijin_rokurunner wrote:Any plan to make some that fit zenki bumpers?


yes, we will be making some that fit zenki bumpers.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions

User avatar
HASport AE86
Club4AG Expert
Posts: 201
Joined: Mon Jan 14, 2013 6:09 pm
Location: Loma Linda, CA

Re: Rondo Bar?

Postby HASport AE86 » Sat Jan 26, 2013 9:13 am

NOKsk8er wrote:will this work if you already have jdm bumper brackets?!


no. These replace the jdm brackets. With our bars, no one will ever need front or rear brackets again while at the same time providing better crash protection as well as chassis rigidity.
SwangBiz Corolla Chassis Parts and F20/F22C/4AGE Wiring Services
(we build stuff, I solder wires, we race corollas, then we get drunk)

Proud Supporter of JSPfab.com, BattleGarage, and Solo8 LED Solutions

Grandmas86
Club4AG Regular
Posts: 16
Joined: Wed Jul 09, 2014 7:18 pm
Location: Palo Alto, CA

Re: Rondo Bar?

Postby Grandmas86 » Sun Jan 25, 2015 9:54 pm

Im totally intrested ! How do i get one !!??

User avatar
Esenpai
Club4AG Expert
Posts: 383
Joined: Thu Jan 17, 2013 5:52 pm
Location: Irvine,CA
Contact:

Re: Rondo Bar?

Postby Esenpai » Mon Jan 26, 2015 12:35 am

heres a pic of a Swangbiz kouki front mounted. You can see the gold peaking out thru parts of the bumper which helps you get an idea of how its set up. fitment is great holds the bumper up very well. Only quality stuff from swangbiz hope to buy a rear bar in the future when i got the extra cash. Keep it up! Image
Image

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Re: Rondo Bar?

Postby saiGone » Wed Jan 28, 2015 8:12 am

Hit up Danny on the FB page, I Don't think he logs in that much here.
Club 4AG member since 05 (Formally SaigonsSon)

Image

ns270r
Club4AG Regular
Posts: 20
Joined: Mon Nov 11, 2013 6:06 am

Re: Rondo Bar?

Postby ns270r » Sat Jan 31, 2015 8:15 pm

also driftwarriorfab makes them. I have three and they are more affordable.

scels12
Club4AG Expert
Posts: 482
Joined: Sat Jan 12, 2013 8:04 pm

Re: Rondo Bar?

Postby scels12 » Sun Feb 01, 2015 9:30 pm

How do this fit on aftermarket bumpers, like uras for instance

User avatar
Esenpai
Club4AG Expert
Posts: 383
Joined: Thu Jan 17, 2013 5:52 pm
Location: Irvine,CA
Contact:

Re: Rondo Bar?

Postby Esenpai » Sun Feb 01, 2015 10:18 pm

scels12 wrote:How do this fit on aftermarket bumpers, like uras for instance

If the bumper is tabbed to use jdm bumper mounts then it should work
Image

Derko
Club4AG Regular
Posts: 31
Joined: Sat Sep 27, 2014 11:59 am

Re: Rondo Bar?

Postby Derko » Mon Feb 16, 2015 2:46 pm

can someone sell me a rondell bar?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “AE86 Parts & Accessories”

Who is online

Users browsing this forum: No registered users and 4 guests