Page 1 of 1
SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Sun Apr 20, 2014 11:25 am
by w.tungsten
Driveshaft $300 shipped. -> $250 shipped
39" from center of U-joint to the other U-joint.
42.5" from flange to flange.
I also have a spacer which I used 1.8" inbetween the GTS rear end and the driveshaft since I set my engine placement a little funny.
MAF + Apexi Intake (note it got crushed a little) $50 shipped. -> $30 shipped
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Thu May 01, 2014 2:09 pm
by w.tungsten
Bump
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed May 21, 2014 8:12 pm
by w.tungsten
Another bump! Still have both items. Throw me offers.
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Tue May 27, 2014 5:25 am
by w.tungsten
still for sale. throw me offers.
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed May 28, 2014 6:47 pm
by w.tungsten
Price dump!
$250 shipped for the driveshaft
$30 shipped for the intake + MAF
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Thu Jun 19, 2014 8:11 pm
by w.tungsten
BUMP
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Sun Jun 22, 2014 8:40 am
by w.tungsten
Really want this stuff gone!! Help me out
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Mon Jun 23, 2014 10:29 am
by firepowar
pm sent
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Mon Jul 07, 2014 7:56 am
by w.tungsten
Bump!
firepowar, sorry i never saw your pm. Send one again if you can.
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed Jul 23, 2014 5:47 am
by w.tungsten
Bump!
still want to sell this stuff. Send me an offer!
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed Jul 23, 2014 9:39 am
by 95gto
who made the drive shaft? And is it designed to work with a GTS rear end with the engine and trans mounted in the location per a standard SR20 mount kit from someone like JSP?
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Fri Jul 25, 2014 5:09 am
by w.tungsten
It is made by flipside customs near Seattle. It is for a GTS rear end. I do not know if it will work with a jsp kit. Flipside makes their own mount kit. I used my own custom mounts.
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed Jul 30, 2014 5:36 pm
by w.tungsten
Bump I have no need for this!!
Also Maf is sold
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Wed Jul 30, 2014 9:42 pm
by El Gato Felix
Is this 1 piece driveshaft compatible with SR5 (Drums) Rear End...??? Thanks
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Thu Jul 31, 2014 3:05 pm
by w.tungsten
Hmmm that's a good question and I don't know the answer. My guess is no since you need a drive shaft to do an sr5 to gets rear end swap.
Re: SR20 > AE86 Driveshaft and SR20 MAF + intake
Posted: Sun Nov 02, 2014 9:14 am
by ShadowFox
still have the driveshaft ?
