Parting out a 4AC
Parting out a 4AC
lmk what you need. Parts will be shipped from Ohio
Air cleaner assembly SOLD
EGR valve SOLD
Valve cover SOLD
Timing belt cover SOLD
Exhaust manifold SOLD
Distributor with plug wires SOLD
Carb and parts SOLD
Rocker Arm assembly SCRAPPED
Cylinder head SCRAPPED
Clutch fan SOLD
Intake manifold SOLD
Alternator with brackets
Dipstick
Water pump pulley
Starter, almost new
Camshaft (distributor drive gear sold)
Fuel Pump
Water lines and elbows
Air cleaner assembly SOLD
EGR valve SOLD
Valve cover SOLD
Timing belt cover SOLD
Exhaust manifold SOLD
Distributor with plug wires SOLD
Carb and parts SOLD
Rocker Arm assembly SCRAPPED
Cylinder head SCRAPPED
Clutch fan SOLD
Intake manifold SOLD
Alternator with brackets
Dipstick
Water pump pulley
Starter, almost new
Camshaft (distributor drive gear sold)
Fuel Pump
Water lines and elbows
Last edited by datu on Sun Oct 15, 2017 12:39 pm, edited 21 times in total.
Re: Parting out a 4AC
What's the cost for the water pump pulley and alternator brackets? Ship to 90058 thank you.
Re: Parting out a 4AC
Got the PM. It wouldn't let me respond with a reply. I understand sounds good.
Re: Parting out a 4AC
Bump. Going to be in the 30s next weekend so can start taking this engine apart
Re: Parting out a 4AC
Bump, new pics added.
Re: Parting out a 4AC
bump to the top!
Re: Parting out a 4AC
Bump to the top!
-
- Club4AG Regular
- Posts: 29
- Joined: Thu May 14, 2015 10:31 am
Re: Parting out a 4AC
Looking for the air cleaner complete and egr assembly. Shipping to 90630 in SoCal? I'll send a PM as soon as I can. Thanks.
-
- Club4AG Regular
- Posts: 14
- Joined: Sat May 30, 2015 5:48 pm
Re: Parting out a 4AC
I need the timing cover with bolts and the plug the plugs to the choke on the carburetor. I also need the carburetor bracket/plate and sensor connector. Shipping to 90037 in SoCal. Thanks
Last edited by Rev2RedLouie86 on Sun May 31, 2015 9:42 am, edited 1 time in total.
- Clutch_Kick_Lou
- Club4AG Enthusiast
- Posts: 66
- Joined: Fri Jan 25, 2013 5:01 pm
- Location: (909)
Re: Parting out a 4AC
Clutch_Kick_Lou wrote:How much for the motor brackets?
Not for sale as of now. Will be when i get the engine out.
Re: Parting out a 4AC
Hey buddy, looking for the distributor cam drive gear, goes on back of the cam by the dizzy! Would you happen to still have it
Re: Parting out a 4AC
previa19 wrote:Hey buddy, looking for the distributor cam drive gear, goes on back of the cam by the dizzy! Would you happen to still have it
Yes, still have it. PM me
-
- Club4AG Regular
- Posts: 14
- Joined: Sat May 30, 2015 5:48 pm
Re: Parting out a 4AC
Ok I have a better understanding of what Im missing for my AE86 SR5 now. I need the following parts:
1. Carburetor heater bracket with connector (pictured)
2. Intake manifold air vacuum sensor fitting( located in between carburetor area and water temperature sensor near the upper radiator hose) I cant really see it it your pictures because all the vacuum hoses are in the way. It has 2 vacuum hoses that connect to the dizzy vacuum solenoid. I could provide pictures of said location via phone if necessary I just really need this part since Im completely missing it.
3. Timing belt cover with bolts (pictured)
4. Might need distributor but will let you know for sure later. Have you tested the vacuum solenoid to check if all 3 valves are holding vacuum?
Please PM me for any questions you might have I really need these parts. Can you provide prices. Thanks
1. Carburetor heater bracket with connector (pictured)
2. Intake manifold air vacuum sensor fitting( located in between carburetor area and water temperature sensor near the upper radiator hose) I cant really see it it your pictures because all the vacuum hoses are in the way. It has 2 vacuum hoses that connect to the dizzy vacuum solenoid. I could provide pictures of said location via phone if necessary I just really need this part since Im completely missing it.
3. Timing belt cover with bolts (pictured)
4. Might need distributor but will let you know for sure later. Have you tested the vacuum solenoid to check if all 3 valves are holding vacuum?
Please PM me for any questions you might have I really need these parts. Can you provide prices. Thanks
-
- Club4AG Regular
- Posts: 14
- Joined: Sat May 30, 2015 5:48 pm
Re: Parting out a 4AC
Bump it to the top mane!!!
Re: Parting out a 4AC
Was wondering if you had the headers for sale?
Re: Parting out a 4AC
I need the water pump pulley and a top valve cover nut if you still have them. Price shipped to 58203 please?
-
- Club4AG Regular
- Posts: 20
- Joined: Tue Mar 26, 2013 8:41 am
Re: Parting out a 4AC
Any chance this is an automatic sr5? If so how much for auto Trans crossmember to 90201
Re: Parting out a 4AC
Sorry this is a manual trans
-
- Posts: 3
- Joined: Fri Jan 11, 2013 10:24 pm
Re: Parting out a 4AC
Got the parts yesterday. Items well packaged and shipped on time. Thank You!
Re: Parting out a 4AC
Thanks for the feedback, bump!
Re: Parting out a 4AC
Bump to the top!
Re: Parting out a 4AC
do you have the remote thermostat housing?
-
- Posts: 3
- Joined: Mon Sep 28, 2015 6:25 pm
Re: Parting out a 4AC
How much for the carb shipped to 36271? Also maybe the distributor if the vacuum advance is still good!
Last edited by 4wdeconobox on Mon Sep 28, 2015 6:50 pm, edited 1 time in total.
Re: Parting out a 4AC
How much would it be to ship the 4ac manual trans including bellhousing, starter, etc to 28078?
"The [AE86] has potential..."
-
- Posts: 3
- Joined: Mon Sep 28, 2015 6:25 pm
Re: Parting out a 4AC
Hey, sorry it won't let me pm you datu, but just one more question, do you know how many amps that alternator puts out?
Re: Parting out a 4AC
4wdeconobox wrote:Hey, sorry it won't let me pm you datu, but just one more question, do you know how many amps that alternator puts out?
It looks like a re-manufactured ND 14672 (found this on a sticker) so it's a 55 amp.
Re: Parting out a 4AC
RedTaco86 wrote:How much would it be to ship the 4ac manual trans including bellhousing, starter, etc to 28078?
Sorry, was going to keep the trans. I can sell the bell housing when I get it out.
-
- Posts: 3
- Joined: Mon Sep 28, 2015 6:25 pm
Re: Parting out a 4AC
Well dang! haha, I'll let you know something by the end of the week on the carb and dizzy, gotta see what my paycheck looks like haha. Thanks!