Page 1 of 1
20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 11:05 am
by jakes_hachiroku
this is more of just a fun topic and a strange curiosity for me.
Just wondering if it is possible for a 16v to run 20v itbs without running a computer! go!
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 11:55 am
by sirdeuce
What do you mean "without a computer"?
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 1:18 pm
by jakes_hachiroku
like no ECU. like running weber dcoe carbs
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 1:51 pm
by jondee86
Not possible. ITB's work with fuel injection, and fuel injection needs an ECU
to drive the injectors. DCOE carbs (or any carb for that matter) add fuel to the
air going into the engine without the need for an ECU.
Cheers... jondee86
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 2:28 pm
by sirdeuce
Unless you want to call it an electric motor and run the whole thing with the starter.
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Thu Jun 23, 2016 3:11 pm
by frostvectron
............. /thread
Re: 20V ITBs on 16V WITH NO ECU??
Posted: Tue Jun 28, 2016 9:03 pm
by Ratranger
I've heard of it being done with a jdm map ecu. But it basically ran like crap being constantly rich. Lowest buck option is megasquirt if you want to get it running right. Best option is don't bother unless you are building the motor, other than in noise there are no gains.