4age 16v shim retainer

totta crolla
Club4AG Pro
Posts: 653
Joined: Tue Mar 26, 2013 5:21 am
Location: Oxford U.K

Re: 4age 16v shim retainer

Postby totta crolla » Thu May 07, 2015 9:15 am

speedmaster wrote:Maybe try asking supertech if they have such retainer. It's a waste not to use the toda shims


It's unlikely that the Toda shims will all fit without modification.

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: 4age 16v shim retainer

Postby speedmaster » Thu May 07, 2015 9:16 am

totta crolla wrote:
speedmaster wrote:Maybe try asking supertech if they have such retainer. It's a waste not to use the toda shims


It's unlikely that the Toda shims will all fit without modification.



i can acquire 3szfe buckets. do you think that will work? its from 1.5L engine

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2184
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: 4age 16v shim retainer

Postby oldeskewltoy » Sun May 10, 2015 8:41 am

speedmaster wrote:
totta crolla wrote:
speedmaster wrote:Maybe try asking supertech if they have such retainer. It's a waste not to use the toda shims


It's unlikely that the Toda shims will all fit without modification.



i can acquire 3szfe buckets. do you think that will work? its from 1.5L engine


**IF** the 3SZ-fe uses the same buckets as the 1SZ... then yes.... but as I've described they are not easily acquired here in the USA
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

turboae92
Club4AG Enthusiast
Posts: 93
Joined: Tue Feb 19, 2013 4:17 pm
Location: miami fl

Re: 4age 16v shim retainer

Postby turboae92 » Mon May 11, 2015 7:40 pm

Check this vendor on ebay his from Australia and he sales the shimless bucket at about $8. Each.. http://m.ebay.co.uk/itm/271860212924?nav=SEARCH

I'm researching the 80's and 90's yahama bike for their lifters it may work for us some have under bucket shim like toda and some solid like yaris.

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: 4age 16v shim retainer

Postby yoshimitsuspeed » Mon May 11, 2015 7:43 pm

You should measure your shim. I can get pocketed retainers for 14mm and 9.5mm. If they are another size I might be able to get you something made.

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: 4age 16v shim retainer

Postby speedmaster » Wed May 13, 2015 7:37 am

turboae92 wrote:Check this vendor on ebay his from Australia and he sales the shimless bucket at about $8. Each.. http://m.ebay.co.uk/itm/271860212924?nav=SEARCH

I'm researching the 80's and 90's yahama bike for their lifters it may work for us some have under bucket shim like toda and some solid like yaris.



thanks bro

turboae92
Club4AG Enthusiast
Posts: 93
Joined: Tue Feb 19, 2013 4:17 pm
Location: miami fl

Re: 4age 16v shim retainer

Postby turboae92 » Wed May 13, 2015 6:21 pm

No problem..hey off topic you should do a build log about the modification on you race ae92..

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: 4age 16v shim retainer

Postby speedmaster » Wed May 13, 2015 8:51 pm

turboae92 wrote:No problem..hey off topic you should do a build log about the modification on you race ae92..

Its a build since 2012. Lols. There is a lot to write... But I do wish to make a blog about it

User avatar
speedmaster
Club4AG Expert
Posts: 234
Joined: Tue Jan 22, 2013 9:44 pm
Location: Malaysia and Brunei
Contact:

Re: 4age 16v shim retainer

Postby speedmaster » Wed May 13, 2015 8:53 pm

turboae92 wrote:No problem..hey off topic you should do a build log about the modification on you race ae92..

uploadfromtaptalk1431575525477.jpg
uploadfromtaptalk1431575525477.jpg (114.3 KiB) Viewed 8092 times


Here is the latest dyno chart. 2014 vs 2015. Gonna go more by next week with a few more mods

turboae92
Club4AG Enthusiast
Posts: 93
Joined: Tue Feb 19, 2013 4:17 pm
Location: miami fl

Re: 4age 16v shim retainer

Postby turboae92 » Fri May 15, 2015 3:08 pm

Those are good numbers.Its a 1.6 or 1.8l and compression??