Will the 4e 6bolt flywheel fit the 7a crank?
Thanks
4e flywheel
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
4e flywheel
Visit my FB fan page at https://www.facebook.com/speedmasteracing
-
- Club4AG Enthusiast
- Posts: 185
- Joined: Thu Jan 10, 2013 10:55 am
Re: 4e flywheel
speedmaster wrote:Will the 4e 6bolt flywheel fit the 7a crank?
Thanks
If you're asking if a 4AFE flywheel will fit a 7AFE crank, then yes, it should.
I believe you need to get a matching pressure plate to your flywheel size though.
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: 4e flywheel
I saw the 4efte flywheel has 6bolts and 212mm. The clutch kit can be used in 4age. So was wondering if the OEM flywheel can be swapped to 7a crank
Visit my FB fan page at https://www.facebook.com/speedmasteracing
-
- Club4AG Enthusiast
- Posts: 60
- Joined: Thu Jan 10, 2013 10:46 pm
Re: 4e flywheel
IIRC when we tried a 4efte flywheel on a 7a some years ago, it was a bit thinner so the starter motor couldn't make contact.
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: 4e flywheel
Evo_lucian wrote:IIRC when we tried a 4efte flywheel on a 7a some years ago, it was a bit thinner so the starter motor couldn't make contact.
Thank you
Visit my FB fan page at https://www.facebook.com/speedmasteracing
Re: 4e flywheel
4efte and 7afe are different bolt pattern it will not fit
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: 4e flywheel
jamspi wrote:4efte and 7afe are different bolt pattern it will not fit
They look almost fit. Thanks bro
Visit my FB fan page at https://www.facebook.com/speedmasteracing