Gauging interest in a sequential spark COP control module

quietskaterguy
Club4AG Enthusiast
Posts: 71
Joined: Mon Jan 14, 2013 9:26 pm
Location: Edmonton Alberta Canada

Re: Gauging interest in a sequential spark COP control modul

Postby quietskaterguy » Fri Jan 30, 2015 10:07 am

I would be interested in this as ill be tossing a ST 20v in my coupe next year and was looking at the dizzy relocation but this sounds way better. Add me to the list of interested parties!
Matt- 83 panda hatch

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


sirdeuce
Club4AG Pro
Posts: 657
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: Gauging interest in a sequential spark COP control modul

Postby sirdeuce » Sun Feb 01, 2015 5:38 pm

Will the COP controller be compatible with the JDM MAP ECU as well as the USDM MAP ECU? It would be a great piece to replace bad ignitors!
One shot, one kill.

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Sun Feb 01, 2015 6:07 pm

sirdeuce wrote:Will the COP controller be compatible with the JDM MAP ECU as well as the USDM MAP ECU? It would be a great piece to replace bad ignitors!


NA or GZE?
The first one done will be compatible with GZE, 20v, 3SGTE, etc. The AFM NA distributors are different. We are still discussing if it would be worth making one for them. I am guessing the NA MAP motor uses the same NA dizzy but I'm not sure.

sirdeuce
Club4AG Pro
Posts: 657
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: Gauging interest in a sequential spark COP control modul

Postby sirdeuce » Sun Feb 01, 2015 6:31 pm

Yes, the NA MAP uses the same signals as the GZE and 20v. I ask as I am considering using the MAP setup I have for my MR2. I have 1 ignitor setup for it, and if it goes out finding a replacement is getting harder by the moment. I would like to be able to have this setup on my FX16, which is, and will be, USDM AFM.
One shot, one kill.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Sun Feb 01, 2015 6:33 pm

sirdeuce wrote:Yes, the NA MAP uses the same signals as the GZE and 20v.


In that case it should work.

choyr
Club4AG Regular
Posts: 13
Joined: Tue Jul 02, 2013 11:19 pm

Re: Gauging interest in a sequential spark COP control modul

Postby choyr » Thu Feb 05, 2015 7:30 am

I am interested if there is. any recommended COPs for the module?

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Thu Feb 05, 2015 9:05 am

1ZZ seem to be pretty easy to find. It's what my 20v cover is designed for and what I plan on designing a 16v valley cover for.

levinbzr97
Posts: 6
Joined: Tue Mar 26, 2013 8:07 pm

Re: Gauging interest in a sequential spark COP control modul

Postby levinbzr97 » Thu Feb 05, 2015 3:42 pm

Count me in for the 20v module!

BoostJunky
Club4AG Regular
Posts: 40
Joined: Thu Apr 04, 2013 8:10 pm

Re: Gauging interest in a sequential spark COP control modul

Postby BoostJunky » Wed Feb 11, 2015 8:58 am

I'd love to see this work as well!
-1986 GT-S BT20v-

kyle20v
Posts: 7
Joined: Tue Feb 10, 2015 7:47 pm

Re: Gauging interest in a sequential spark COP control modul

Postby kyle20v » Fri Feb 13, 2015 3:17 pm

I would definitely be interested

shagymc
Club4AG Expert
Posts: 355
Joined: Mon Jan 14, 2013 9:43 pm

Re: Gauging interest in a sequential spark COP control modul

Postby shagymc » Fri Feb 13, 2015 3:36 pm

When is the projected date that these might be available?

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Fri Feb 13, 2015 4:15 pm

shagymc wrote:When is the projected date that these might be available?


I am still waiting on the completion of the working prototype.
The electrical engineer doing all the hard stuff is doing this as a pet/side project so it's going to come down to how much time he has.
I would love to see the first run in the next two months but I can't make any guarantees right now. Once the working prototype is done I will be able to give a more accurate ETA for the first run.

Autohaus_Z
Club4AG Enthusiast
Posts: 130
Joined: Thu Jan 10, 2013 10:45 pm
Location: San Jose, CA

Re: Gauging interest in a sequential spark COP control modul

Postby Autohaus_Z » Mon Feb 16, 2015 9:46 pm

Super interested since I just dropped $250 on a new igniter and found out they dont make reman GZE distributors. Getting rid of the ignitor, coil, wires, ect adds a significant amount of reliability as well. This might be the make or break of me selling off my GZE swapped vehicle.
Owner. CM Autohaus LLC. San Jose, CA.
RnD/Product Testing. Battle Garage RS/Annex Suspension Group
Amsoil Dealer # 5615215
IG @Autohaus_Z for AE86 fun, T50 trans builds, and track life!
The Autohaus Podcast

User avatar
SolidSTI
Club4AG Enthusiast
Posts: 79
Joined: Sun Jan 27, 2013 3:50 pm
Location: Louisiana

Re: Gauging interest in a sequential spark COP control modul

Postby SolidSTI » Tue Feb 24, 2015 9:29 am

I'd love a setup for the JDM 16V on stock JDM ECU.
ImageImageImageImage
1985 Corolla GT-S | 1985 Trueno Sprinter | 1989 Skyline GT-R | 2001 Prelude | 2005 STi | 2008 Forester XT| 1991 M923A1
http://TruFactsRacing.com

User avatar
death_blossom
Club4AG Enthusiast
Posts: 60
Joined: Thu Jan 10, 2013 10:36 pm
Location: Vancouver, BC (Canada)

Re: Gauging interest in a sequential spark COP control modul

Postby death_blossom » Sun Mar 22, 2015 7:22 am

any update on this?
location: Vancouver, BC (Canada)

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Sun Mar 22, 2015 11:11 am

I do keep getting little updates from the electrical engineer. It is moving forward. He is pretty close to having the working prototype running on his car. I hope to have more exciting updates soon.

shagymc
Club4AG Expert
Posts: 355
Joined: Mon Jan 14, 2013 9:43 pm

Re: Gauging interest in a sequential spark COP control modul

Postby shagymc » Sun Mar 22, 2015 6:38 pm

I am pretty pumped for this and very interested in how it will work!

User avatar
shadowwolf151
Club4AG Regular
Posts: 27
Joined: Sat Jan 31, 2015 8:34 am
Location: Jacksonvill, FL

Re: Gauging interest in a sequential spark COP control modul

Postby shadowwolf151 » Sat Mar 28, 2015 6:22 am

I'm interested in one for the 20v! I'm putting together a swap right now! though is sounds like I'll end up switching to the cop at a later time, for now I'll just cut and re-weld my firewall. :D

coupeae8six
Posts: 5
Joined: Tue Feb 10, 2015 11:02 pm

Re: Gauging interest in a sequential spark COP control modul

Postby coupeae8six » Wed Apr 08, 2015 11:17 pm

interested! Is the prototype done yet? Will this be similar to the KKT module except not programmable?

User avatar
death_blossom
Club4AG Enthusiast
Posts: 60
Joined: Thu Jan 10, 2013 10:36 pm
Location: Vancouver, BC (Canada)

Re: Gauging interest in a sequential spark COP control modul

Postby death_blossom » Tue Jun 09, 2015 8:25 pm

interest is still strong in Canada. still waiting!
location: Vancouver, BC (Canada)

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Thu Jun 11, 2015 10:09 pm

Things are still moving along.
I have a rev1 module here that I haven't had time to wire in. It is not fully functional and I need to figure out what id can and can't do.
My elecrical engineer has had his 16v NA running on the rev1 and now the rev2 and is working out kinks in the system. I am bummed I haven't been able to put more energy into this myself but I am probably hitting around 80 hour weeks right now so spending 2 min to update a thread is about all I got right now.
Hopefully more updates soon.

User avatar
death_blossom
Club4AG Enthusiast
Posts: 60
Joined: Thu Jan 10, 2013 10:36 pm
Location: Vancouver, BC (Canada)

Re: Gauging interest in a sequential spark COP control modul

Postby death_blossom » Sat Jun 13, 2015 11:18 pm

80hr weeks? yikes, take a vacation bro! :P
location: Vancouver, BC (Canada)

ezae8601
Club4AG Regular
Posts: 11
Joined: Sat Mar 28, 2015 4:54 pm

Re: Gauging interest in a sequential spark COP control modul

Postby ezae8601 » Sun Jun 14, 2015 8:06 am

I'd be interested. 16v version. I'm sitting on some parts that could be useful. Gze dli.

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Mon Jun 29, 2015 1:19 pm

My engineer is looking for someone near Maryland with a GZE or 20v he could use for testing this. Let me know if you can help.

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 1889
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Gauging interest in a sequential spark COP control modul

Postby oldeskewltoy » Mon Jun 29, 2015 4:07 pm

yoshimitsuspeed wrote:My engineer is looking for someone near Maryland with a GZE or 20v he could use for testing this. Let me know if you can help.


if not enough response try hitting up www.ectoyotas.com/, they are based on the east coast, and might have a member near your engineer
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

mmcvay
Posts: 1
Joined: Wed Feb 27, 2013 9:34 pm

Re: Gauging interest in a sequential spark COP control modul

Postby mmcvay » Fri Jul 24, 2015 6:30 pm

I have a running 20v he can use in northern VA, I'll email you my info.

sirdeuce
Club4AG Pro
Posts: 657
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: Gauging interest in a sequential spark COP control modul

Postby sirdeuce » Wed Jan 27, 2016 2:46 pm

Not anywhere near getting my engine done, but wondering how far off this ignition set is. Bump
One shot, one kill.

yoshimitsuspeed
Club4AG MASTER
Posts: 2084
Joined: Sun Jan 13, 2013 1:18 pm
Contact:

Re: Gauging interest in a sequential spark COP control modul

Postby yoshimitsuspeed » Wed Jan 27, 2016 5:18 pm

It's hard to give an exact date as every step has taken a lot longer than we expected. Right now we have a finalized, tested and proven design. We have found a case that I am 90% sure is the one we will be using. The engineer is now modifying the PCB design to work with the size of the case. So we are pretty close to getting the first run manufactured. Maybe 2-4 months.

sirdeuce
Club4AG Pro
Posts: 657
Joined: Mon Jan 14, 2013 9:47 pm
Location: Sierra Nevada foothills

Re: Gauging interest in a sequential spark COP control modul

Postby sirdeuce » Wed Jan 27, 2016 7:21 pm

Cool, just looking into it. $ months might be where my engine starts looking less like parts as well.
One shot, one kill.

cedu
Club4AG Enthusiast
Posts: 68
Joined: Fri Jan 11, 2013 9:39 pm

Re: Gauging interest in a sequential spark COP control module

Postby cedu » Thu Feb 18, 2016 11:07 am

Minamoto posts are lol.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: 4A-GE ENGINE”

Who is online

Users browsing this forum: No registered users and 4 guests