7AFE Forged Rods
-
- Club4AG Enthusiast
- Posts: 132
- Joined: Wed Jan 09, 2013 4:02 pm
7AFE Forged Rods
I'm looking into doing a 7AGE but I want to forge the bottom end before I put it into the car. I'm wondering if anyone besides Spool makes forged rods for the 7AFE.
Re: 7AFE Forged Rods
Last time i spoke to the guys at belfab they said they arent making 7afe rods anymore.
Re: 7AFE Forged Rods
Dang. Well there are 2 different bootleg China-made 7A rod sets on eBay, one says guaranteed to 10500rpm, too lol. Go with Spool.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001
Knockoff Crew member #0001
-
- Club4AG Enthusiast
- Posts: 132
- Joined: Wed Jan 09, 2013 4:02 pm
Re: 7AFE Forged Rods
Well, while I have you, are the gze pistons worst pins the correct size for the 7a rods? I know piston height is different but I'm more worried about the pin diameter.
Re: 7AFE Forged Rods
Spool will make them with either size end: 18mm or 20mm. They ain't scared.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001
Knockoff Crew member #0001
Re: 7AFE Forged Rods
alabamaguy wrote:I'm looking into doing a 7AGE but I want to forge the bottom end before I put it into the car. I'm wondering if anyone besides Spool makes forged rods for the 7AFE.
Ill make this easy for you
2 options:
http://www.crower.com/connecting-rods/billet-crowerods-toyota-7afe-5-218-c-to-c-set-4.html
My strong recommendation is this kit. you can of course just get rods from him but this is a very very well thought out kit.
http://www.mrpltd.co.nz/product/278/7a-piston-2frod-kit.html
Custom 7A rods w/ ARP hardware and they will fit the larger fully floating pin
8.9 gze pistons w/ wrist pins
7A crank gear re-keyed for new deck height
Tuneshttps://truck.it/p/1Dl1ejMkZq
85' AW11 MS3/X Full Sequential w/ COP (DD)
87' AW11 Spare Shell
88' FJ62 MY BABY
91' AE92 DX Gutted, caged, @15psi GRMS challenger
91' AE92 DX Spare Shell
94' AE101 7AFE Backup DD
03' CBR 954 RR FireBlade
85' AW11 MS3/X Full Sequential w/ COP (DD)
87' AW11 Spare Shell
88' FJ62 MY BABY
91' AE92 DX Gutted, caged, @15psi GRMS challenger
91' AE92 DX Spare Shell
94' AE101 7AFE Backup DD
03' CBR 954 RR FireBlade
Re: 7AFE Forged Rods
carbd7age wrote:Dang. Well there are 2 different bootleg China-made 7A rod sets on eBay, one says guaranteed to 10500rpm, too lol. Go with Spool.
Got mine from spool....seem to be decent