According to the information provided here...
http://club4ag.com/faq_and_tech_pages/E ... 04A-GE.htm... you should have the 14-pin "
C*" wire to wire (in-line) plug.
The wires that are connected by this plug are marked on the wiring diagram
with
C* in a square box with two arrowheads on one side. Above the box will
be the number of the corresponding pin in the
C* connector.
One side of the
C* connector leads to the 14-pin "
R" plug on the ECU. The other side
of the
C* connector leads to the AFM, COR, check connector and check engine light.
So it sounds like you are on the money... there must be some kind of sub-harness
that pulls all that stuff together for feeding to the ECU plug.
Cheers... jondee86