This forum is pretty quiet, but figure I'll try. Need some help if someone with an AE92 GT-S can measure the diameter of their OEM strut casing, both front and rear? I've got Koni inserts in my AE82 FX16 but the rear is not the OEM FX16 but OEM AE92. I'm trying to figure out if the Ground Control coilover sleeves for a AE92 will fit my front also, or if I'll need to source a mix and match set.
I'm wanting to get the coilovers for using for Rally Cross, so actually I'm looking to NOT drop height. My current set up has TRD FX16 springs, they work great but drops the height a little. Stock springs are too soft.
Thanks for any help!
Help measuring AE92 Strut diameter
Re: Help measuring AE92 Strut diameter
I hope this webpage helps, this guy has done what not to his fwd gts, check it out!
http://www.ae92gts.com/home.html
http://www.ae92gts.com/home.html
Re: Help measuring AE92 Strut diameter
Thanks for the suggestion, but it appears that site is no longer active and valid!
Bummers!
If I could just get someone to crawl into their wheelwell with some calipers and measure the diameter of their stock OEM strut tubes on AE92 Corolla GTS, that's be awesome! I'd hate to buy a FX16 front kit and AE92 rear kit and find out I didn't have to.
Bummers!
If I could just get someone to crawl into their wheelwell with some calipers and measure the diameter of their stock OEM strut tubes on AE92 Corolla GTS, that's be awesome! I'd hate to buy a FX16 front kit and AE92 rear kit and find out I didn't have to.