Does anyone have any good sources for 2TG parts ? Specifically service parts, gaskets et ...?
Thanks
2TG Parts
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: 2TG Parts
http://www.swmotorsport.com.au/index.ph ... 8e1b01bd99
These guys are down unda... I don't know anyone in the US
These guys are down unda... I don't know anyone in the US
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Expert
- Posts: 423
- Joined: Thu Jan 10, 2013 10:08 pm
- Location: SF
Re: 2TG Parts
Thanks !
-
- Club4AG Pro
- Posts: 516
- Joined: Wed Jan 09, 2013 5:51 pm
- Location: PA
Re: 2TG Parts
What do u want I can get you gasket kit, gear drives, adjustable cam gears, gear tensiones..2.0 stroker crank and pistons ..all from Japan PM me with what u need and I can get u some prices.
20v power.....powered by Orion's Demise!
Re: 2TG Parts
also
http://www.brdracing.com/ for bottom end 2t/3t parts
http://www.kameariusa.com/ bit pricey but nice gear!
http://toyheadauto.com/PerformancePages/2TG_Parts.html lots of parts all in one place. kameari parts mostly.
i may be able to help on 2nd hand parts. but im in NZ so shipping is a killer.
http://www.brdracing.com/ for bottom end 2t/3t parts
http://www.kameariusa.com/ bit pricey but nice gear!
http://toyheadauto.com/PerformancePages/2TG_Parts.html lots of parts all in one place. kameari parts mostly.
i may be able to help on 2nd hand parts. but im in NZ so shipping is a killer.
-Mark
'71 ke26 5k, '75 ke25 4age, '78 kp60 bug, '83 ke70 3tgte, '85 ke74, '86 ae82 20v, '90 st185 gt4, '90 sw20
'71 ke26 5k, '75 ke25 4age, '78 kp60 bug, '83 ke70 3tgte, '85 ke74, '86 ae82 20v, '90 st185 gt4, '90 sw20
-
- Club4AG Pro
- Posts: 516
- Joined: Wed Jan 09, 2013 5:51 pm
- Location: PA
Re: 2TG Parts
Guy at BRD is a dickhead if he suspects ur just asking questions and not buying anything right away...kameariusa is over priced i can get their stuff direct from japan cut them out the equation...the over price already overpriced parts..and take several weeks to months to get parts i can get in 2 weeks on your door step.
20v power.....powered by Orion's Demise!
Re: 2TG Parts
more sources, the better Good to hear feedback about customer service. I'm betting BRD gets alot of questions for the amount of sales.
and then there's always TOYOTA!
Genuine part numbers can be looked up on http://www.toyodiy.com if you don't have your own pirate EPC. Sometimes toyota may struggle to identify the part you require over the phone, but if given a part number it's usually pretty quick to say if it's available, been superceeded or discontinued.
2T-G
http://www.toyodiy.com/parts/g_G_197708 ... MQG_1.html
2T-GEU
http://www.toyodiy.com/parts/g_J_1982_T ... MQF_1.html
3T-GTEU
http://www.toyodiy.com/parts/g_J_1984_T ... MQZ_1.html
Bottom end bearings/gaskets I use ACL (australian) and NDC (japanese).
The ACL EC993 conversion set for 3T in particular for lower gaskets (sump, crank seals) since the 2tgeu specific sets are harder to source off the shelf and usually dearer.
http://catalog.acl.com.au/ACLWebCatalog ... e=0&pg=all
ACL lists 2tgeu but I don't believe the full set is available anymore??
http://catalog.acl.com.au/ACLWebCatalog ... listtype=0
It's great to source parts direct from the manufacturer, but not all of us have that luxury.
Also, speaking on behalf of myself, im sure your honest and everything, but if i were sinking a grand+ into rebuild/upgrade parts, i'd want to buy direct from a reputable business since I live far far away. its just too risky otherwise. im sure you'd understand this viewpoint?
nice to have the option there!
chur chur
and then there's always TOYOTA!
Genuine part numbers can be looked up on http://www.toyodiy.com if you don't have your own pirate EPC. Sometimes toyota may struggle to identify the part you require over the phone, but if given a part number it's usually pretty quick to say if it's available, been superceeded or discontinued.
2T-G
http://www.toyodiy.com/parts/g_G_197708 ... MQG_1.html
2T-GEU
http://www.toyodiy.com/parts/g_J_1982_T ... MQF_1.html
3T-GTEU
http://www.toyodiy.com/parts/g_J_1984_T ... MQZ_1.html
Bottom end bearings/gaskets I use ACL (australian) and NDC (japanese).
The ACL EC993 conversion set for 3T in particular for lower gaskets (sump, crank seals) since the 2tgeu specific sets are harder to source off the shelf and usually dearer.
http://catalog.acl.com.au/ACLWebCatalog ... e=0&pg=all
ACL lists 2tgeu but I don't believe the full set is available anymore??
http://catalog.acl.com.au/ACLWebCatalog ... listtype=0
It's great to source parts direct from the manufacturer, but not all of us have that luxury.
Also, speaking on behalf of myself, im sure your honest and everything, but if i were sinking a grand+ into rebuild/upgrade parts, i'd want to buy direct from a reputable business since I live far far away. its just too risky otherwise. im sure you'd understand this viewpoint?
nice to have the option there!
chur chur
-Mark
'71 ke26 5k, '75 ke25 4age, '78 kp60 bug, '83 ke70 3tgte, '85 ke74, '86 ae82 20v, '90 st185 gt4, '90 sw20
'71 ke26 5k, '75 ke25 4age, '78 kp60 bug, '83 ke70 3tgte, '85 ke74, '86 ae82 20v, '90 st185 gt4, '90 sw20