need help identifying this gze transmission.

[turboae92]

Need to know if this transmission is an Lsd version and if anyone has put together axles from other yotas to work with this transmission on an ae92.

[sirdeuce]

Looks like an E-58, non LSD. If the bell bolts to a 4ag, it's most likely from an AE101.

[ae90tuner]

On the E series transmission the factory viscous lsd has the bar in the diff and the open diff has a small circular openning. The aftermarket diffs for the E series also has the small circular hole opening in the diff.

The only lsd axle that will work aside from the factory one is the mr2's lsd axle stub.

[turboae92]

Thank you both, after further research and seller confirming that it's lsd tranmission.Now I need to find some lsd axles, can anyone help me get them.

[ae90tuner]

You should ask around in mr2oc. Im positive the sw20 lsd axle stub works. You will need a shorter driverside axle. Chico race works sells a aw11 gze length axle.

http://www.monkeywrenchracing.com/produ ... ts_id=1252

[turboae92]

Thanks for your help ae90tuner, will contact this vendors to who can help.