I thought the 4agze had a 225mm/230mm flywheel. the later 16v and 20v had the 212mm flywheel.

from what i have read about pacesetter is that the 4ag header tends to crack. i have personal experience with OBX and in my application there was no problems with fitment. it bolted up like it should. the only thing that i cannot say is i do not know how the egr pipe fits to the header since im not ...

found on another forum that i should swap all of the original electronics, ie dizzy, tps, sensors, etc. but i think they were talking about the JDM high comp? yes that would be the easiest way to do this swap. the ae92 electronics are a little different. swapping all the blue top electronics over t...

I would pull out the passenger side lock there is a 4 digit number take that number to the dealer they will make a brand new key that was NOT cut from the original. it is litterally a brand new key and not a copy. i had to do this since my ignition did simmilar things and it helped a lot. also there...

im not sure but the sr20ve and the sr20vet injectors might fit. they are 350cc for the non turbo and 440cc for the turbo model. they are bottom feed instead of side feed tho. Nissan SR20ve & SR20vet injector. http://image.nengun.com/catalogue/original/nengun-1164-02-sard-injectors.jpg yes the 2j...

Heres mines: http://i48.photobucket.com/albums/f244/starinkona/SUNP0165.jpg http://i48.photobucket.com/albums/f244/starinkona/SUNP0162-1-1.jpg http://i48.photobucket.com/albums/f244/starinkona/SUNP0160.jpg http://i48.photobucket.com/albums/f244/starinkona/SUNP0164-1-1-1.jpg hey kona, what rear bump...

+1 your oem inner and outer tie rods will have enough adjustment room to get your alignment straight.

I have considered one of these but i dont know how well they will deture criminals


I also like what yellowsnowforfreeposted

+1 on kill switches

theshaw0000 wrote:I hve the redtop large port wud it be worth it to switch to the blue

I would stick to the red large port head. the 2ng gen large port has a little bit different intake ports andmake a bit more power but over all its about the same.

if Grant H doesnt get that t50 gasket kit im next in line

looking good those seats are going to look great in there

John H. wrote:Please post pictures afterwards!

yes i agree you island guy relly know how to build good looking cars

here is my bay

my car didnt have that cap either. i found one from an ae92 and it fit perfect

I havent done this but i have thought of a way to do this. i would look up the wiring from the aw11 and see if you can get it to work using the aw11 relays and control box.

drool nice parts GLWS free bump

MisterJerk wrote:the redtop/small port head flows better and is an upgrade to the big port/bluetop head. Kinda going backwards here.

+1 I prefer the small port for n/a

it probably has to do with the bushed end. it is probably a coustom piece compared to the heim that is off the shelf. think about it the heim is one peice the bushing is the threaded shaft welded to a pipe that holds the bushing and isnt an off the shelf part.

is this a large to small port or a large port tvis delete? from the pic it looks like small port to large port adapter

the parts you would need are listed below with the trd part number gears TRD 33032-AE801: 1st gear (Teeth: 31) TRD 33033-AE801: 2nd gear (Teeth: 28) counter gears TRD 33424-AE801: 2nd counter gear (Teeth: 25) TRD 33427-AE801: 1st counter gear (Teeth: 19) http://www.rhdjapan.com/trd-close-ratio-trans...

see if it is in the arcived threads.
http://web.archive.org/web/20120418130413/http://forums.club4ag.com/

here is the most detailed 4agze swap how to i have seen.
http://www.86garage.com/forums/viewtopic.php?f=47&t=3791

ga_goosh wrote:let me get back to you on a shipping quote.

so shipping will be about 30 to 40 bux. i will ship the head to you for 110 total price. let me know

do you know what the average cost is to ship a head? im a bit interested in your service. thanks let me know from most areas in the USA... somewhere between $30 and $40. there is some cash to be saved by shipping USPS. Return freight is usually a bit more($10+) because I typically insure it for $80...

check the TPS make sure it is adjusted correctly

if that is a rubber distributor cover ill take that. in the 2nd pic there is a water piping that goes under the intake ill also get that if it is available. what price do you want for both shipped to 77584 thanks http://i57.photobucket.com/albums/g233/street_kreep/IMAG0636_zpsb6b17cf6.jpg http://i57...

do you know what the average cost is to ship a head? im a bit interested in your service. thanks let me know

wow i think its time to get a wagon free bump awesome wagon you have

will you ship the trd rep wing?

let me get back to you on a shipping quote.