Search found 493 matches
- Sun Mar 18, 2018 6:36 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: She won't start (fuel related)
- Replies: 15
- Views: 12056
Re: She won't start (fuel related)
You can buy distributor oil seal replacement kits, from at least two different sources. Kbox in Canada, and Matrix Garage in the US.
- Fri Mar 02, 2018 3:11 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: Relocating the oil pan drain bolt?
- Replies: 3
- Views: 12384
Re: Relocating the oil pan drain bolt?
Thanks. I do have a friend who can weld & fabricate, so that's not a worry for me. I have an extra AE101 4A-FE oil pan sitting around, and I may have him modify it for me someday. I'll have to take another look at a pan to see if it would really be effective. If anything, I was thinking about ge...
- Sat Feb 24, 2018 5:11 am
- Forum: TECH: Corolla FWD / MR2
- Topic: Relocating the oil pan drain bolt?
- Replies: 3
- Views: 12384
Relocating the oil pan drain bolt?
I can understand for the MR layout that the oil pan drain is probably in a more ideal location since you likely jack up the rear of an AW11 for an oil change. But for FWD setups, jacking up the front of the car means the oil pan drain plug is higher than the lowest part of the pan while the front en...
- Fri Feb 23, 2018 4:07 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: OST-045: 5AGTE.... again ;)
- Replies: 26
- Views: 19114
Re: OST-045: 5AGTE.... again ;)
I always like these topics, even if I don't post in them much. Great work as always
- Tue Feb 13, 2018 5:53 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4age PCV how does it work
- Replies: 12
- Views: 15565
Re: 4age PCV how does it work
So it would be safe to plug off that fitting on the IM, and vent the cam cover fitting to a catch can? Or even 'just' using a small filter on the cam cover fitting?
- Thu Feb 08, 2018 6:21 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: OST-045: 5AGTE.... again ;)
- Replies: 26
- Views: 19114
Re: OST-045: 5AGTE.... again ;)
That's a lot of material in the one port
- Wed Jan 17, 2018 3:50 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: OST-045: 5AGTE.... again ;)
- Replies: 26
- Views: 19114
Re: OST-045: 5AGTE.... again ;)
1.7l?
How did those shims get what appears to be rust on them??
How did those shims get what appears to be rust on them??
- Sun Jan 14, 2018 8:22 am
- Forum: 4A-GE Engine Parts
- Topic: FS: Various 4age bluetop (early bigport) parts and more
- Replies: 6
- Views: 6878
Re: FS: Various 4age bluetop (early bigport) parts and more
I have gray connectors with 2 pins each. Not to derail a Buy-Sell-Trade topic into technical talk, but that distributor might be off an AE92. For the US market, I know for a fact that the smallport dizzy has two small-ish grey plugs, smaller than the two round AE86 / AW11 connectors. I'm not sure a...
- Wed Jan 03, 2018 4:12 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Ignition timing problem
- Replies: 50
- Views: 46656
Re: Ignition timing problem
I'm also in the Tampa Bay area of FL. But I don't have much experience with this kind of diagnosis (and I don't have an AE86).
- Wed Dec 27, 2017 7:04 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Happy holidays
- Replies: 4
- Views: 4770
Re: Happy holidays
Indeed I much prefer to check forums for car stuff than FB.
- Thu Dec 07, 2017 2:45 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Why such a small sump?
- Replies: 4
- Views: 5233
Re: Why such a small sump?
Also of note is that the RWD oil pan is different than the FWD oil pans. It has grooves in the bottom of the lowest part of the pan, running front to rear (looking at the timing belt side of engine), whereas the FWD pan does not.
- Wed Dec 06, 2017 2:48 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Some people
- Replies: 3
- Views: 3888
Re: Some people
I'm at work and I don't have sound. I am seriously curious about the role of all that epoxy there? He used it to fill in between the runners so that it's solid in between the smallport intake runner openings. You can see on it where the bigport gasket was sitting, and the ports were partially block...
- Sat Dec 02, 2017 5:16 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 9465
Re: 4AGZE Pistons
Matrix Garage also has 16v pistons listed (and 20v on another page):
http://www.matrixgarage.com/store/pistons-1
http://www.matrixgarage.com/store/pistons-1
- Thu Nov 30, 2017 3:42 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 9465
Re: 4AGZE Pistons
I got mine from Lithia Toyota back when there was someone there (Aaron maybe?) who would be able to order parts from Toyota Japan. I also had a coupon code, around this time of year, so I got them for a bit less.
- Sat Oct 21, 2017 5:22 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
Very nice! It will be interesting to see how the modified 7A-FE does. Whenever I push my CAT around, it seems that the poor thing can't breathe at all through those dinky intake ports and long-runner (early 4A-FE) intake manifold. Without yet having a 4A-GE, I can understand the benefits of using a ...
- Fri Oct 20, 2017 6:15 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
9A-FE?? The fact that the rods are MRP makes me think of their stroker kits.
Forged GE pistons, or custom FE ones?
Never knew the Euro cam was different. There was also a nicer FE exhaust manifold, UK or Euro. If I recall correctly you got one for your built-up 4A-FE.
Forged GE pistons, or custom FE ones?
Never knew the Euro cam was different. There was also a nicer FE exhaust manifold, UK or Euro. If I recall correctly you got one for your built-up 4A-FE.
- Sun Oct 15, 2017 3:26 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
oldeskewltoy wrote: their delay is why there have not been many new posts recently
I've been wondering how the "F" this head has been coming along
- Fri Sep 22, 2017 9:14 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 500+ hp on stock bluetop cams?
- Replies: 36
- Views: 31946
Re: 500+ hp on stock bluetop cams?
Thanks for posting about this. I haven't yet built an engine, but I've set ~300 HP at the wheels (AWD) as my goal. So far the only cams I've really considered are the matched 256 Cat Cams that OST recommended to me a while ago. Paired with OST's headwork, I think that would be sufficient, especially...
- Wed Sep 20, 2017 5:02 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: 4A-FE pistons question
- Replies: 11
- Views: 21211
Re: 4A-FE pistons question
Thanks for posting! I haven't given much thought to this idea since I posted this topic, but I'm glad to hear it's do-able.
- Sat Sep 16, 2017 6:58 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Small port 4age with big port cams - Timing & Injector questions
- Replies: 20
- Views: 19385
Re: Small port 4age with big port cams - Timing & Injector questions
Gotcha :idea: I don't think I've reached blackbelt status quite yet, though :? The Honda side of things is much easier because so much has already been done, it comes down to either riding on the shoulders of someone else (like me buying that engine and using the tune for it) or following along with...
- Fri Sep 15, 2017 7:24 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Small port 4age with big port cams - Timing & Injector questions
- Replies: 20
- Views: 19385
Re: Small port 4age with big port cams - Timing & Injector questions
or just about anything on a Honda ECU... THAT DOES NOT MAKE IT A GOOD IDEA !!! Well... not unless you have amazing skilz and don't mind spending a lot of time and money building something that runs almost as well as a factory setup ;) I disagree somewhat with this. Besides my All-Trac, I also own a...
- Tue Aug 08, 2017 3:21 am
- Forum: TECH: 4A-GE ENGINE
- Topic: excessive oil pressure on fresh engine rebuild
- Replies: 17
- Views: 13570
Re: excessive oil pressure on fresh engine rebuild
toycort wrote:It is an Asain pump.
Makes me think that it's worth disassembling and inspecting a brand new Aisin oil pump, if one is being used for a build, to make sure there are no issues like this. I think there was some talk here previously about Aisin (OEM manufacturer) vs Toyota oil pumps.
- Sun Jul 30, 2017 8:21 am
- Forum: TECH: 4A-GE ENGINE
- Topic: DIST. FUNCTION
- Replies: 4
- Views: 5154
Re: DIST. FUNCTION
You can buy seal kits to replace that inner seal. I think Matrix Garage has a set, and there's at least one other brand out there too.
Edit:
http://www.matrixgarage.com/content/16- ... or-rebuild
Edit:
http://www.matrixgarage.com/content/16- ... or-rebuild
- Fri Jul 14, 2017 8:52 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Crank resurfacing
- Replies: 5
- Views: 6153
Re: Crank resurfacing
Why not get a set of rods for the 42mm crank? I imagine it's more worth keeping the 42mm crank as-is than modifying it. If you're interested, I have a set of 42mm rods with ARP rod bolts I want to get rid of. They will need reconditioning, as the lackwit I bought them from (someone here) didn't ship...
- Tue Jun 27, 2017 4:15 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
Interesting. Is it advantageous to have the ex valves like that? What (or who) is this head for, if I may ask? I was thinking that it's a lot of work for an "economy" head, but a good experiment regardless. Like the early 4A-FE head you worked on for your CAT sedan. (I still hope you decid...
- Sat Jun 24, 2017 7:51 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Please identify this 4a-ge for me.
- Replies: 7
- Views: 6510
Re: Please identify this 4a-ge for me.
We never had 4A-GE powered Celicas in the US. I guess the OP is in Europe? I was thinking someone swapped a 4A-GE into a Celica (if this was in the US). Which wouldn't make sense since someone would be better off with a 3S-GE (stock vs stock).
- Fri Jun 23, 2017 3:56 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Please identify this 4a-ge for me.
- Replies: 7
- Views: 6510
Re: Please identify this 4a-ge for me.
The coolant pipe on the distributor makes me think it's an FX engine. I don't know about the EGR, MAP or AFM differences, though.
- Fri Jun 23, 2017 3:53 am
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
Cleaned up casting, like you do with the G heads? Or was it that nice from the foundry?
- Tue Jun 20, 2017 6:36 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: OST-044: What the "F"?
- Replies: 25
- Views: 33402
Re: OST-044: What the "F"?
Figures about the oil passage. Why make something perfect, right?
I guess the intake couldn't be any better of an angle, going more like ( instead of L.
I guess the intake couldn't be any better of an angle, going more like ( instead of L.
- Fri Jun 16, 2017 3:46 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Can a 4ac crankshaft work on a 4age?
- Replies: 4
- Views: 5173
Re: Can a 4ac crankshaft work on a 4age?
You could always keep the parts as spares, especially if they're in good shape. I agree with the notion of getting a complete engine. I made the same mistake when I started out, I bought a disassembled 4A-GE out of an AE86. I ended up not being able to use any of the parts since my wagon has a FWD e...