ok will do. thanks guys.

bump

bump

i have the brake booster plugged. and all other lines im not using for things like ac plugged as well. and yes it is all connected and routed right as far as i can tell. i used a noid light and i am getting pulse. and i am also getting spark. so i dont know... i am kind of stumped... i dont have the...

i am currently in the middle of a engine swap. i put a aw11 gze in my corolla and it wont start. i have the cam timing right and the distributor is in the right spot. but it doesnt stay running. here is a video i made of what its doing.


http://youtu.be/6fFyS97pofM

http://youtu.be/6fFyS97pofM

here is a video of what it is doing. any suggestions?

and please excuse my ghetto set up. i want to get the car running before i clean up the wiring and weld the intercooler piping.

when i manually open the flap on the afm it turns the fuel pump on. and it turns on while cranking. so i would think i wired it correctly no?

ok there is continuity... and it is secure on the chassis so i am guessing this isnt my problem?

how can i check if its the engine ground?

nope still does the same thing. :/

and when i crank i get fuel also

when i open the flap on the afm i can hear the fuel pump turn on... so i think thats ok then right?

my car starts and shortly dies after it starts. i had this problem in my old corolla and it ended up being a bad ground. how can i test if this is the case here?

so i got a aw11 gze and am trying to wire it up for my corolla. ive gotten the car to start with the cold start injector but it dies shortly after. i have fuel to the rail. and i have spark. my cam timing is right as well... only thing i can think of is my injectors are not working. i want to make s...

mods can delete

problem solved i crossed the fuel lines like a idiot. thanks man.

if i take the line off the fuel pressure regulator i get fuel while cranking. but no fuel if i hook up the fuel pressure regulator to the rail. i just got my new fuel pressure regulator in yesterday and still no fuel past the rail. =(

so i recently did a gze swap in my ae86 and i am not getting fuel to the injectors. i pulled the line off the FPR (fuel pressure regulator) and i have gas and pressure. but i dont have any gas coming out of the FPR to the rail when i hook the line back up. i rebuilt the engine but i did not replace ...

lol ^^^^ we dont need that one. haha

i need that and the shurberts gze swap lol.... i should have saved them... damn it. lol

so we dont have half as much information we had compiled as we did before. i hope they were backed up on the servers i kinda miss our old layout as well. but i am glad we got the community back and running.



will the stickies and other tech info come back Moto?

nooo my DIY for electric fans is gone =(((( i wrote that while in high school so i felt like i contributed to the community lol now i will only have a couple of posts =(