Fun Interior pics: missing Door Panels :( http://img.photobucket.com/albums/v204/Tony777/Eight-Six/82712018-7AC6-49A9-BDE1-81CBA174AEE3_zpsuxq92dmx.jpg http://img.photobucket.com/albums/v204/Tony777/Eight-Six/3320F337-FC3C-46E7-BDAC-783CC4200A7C_zpsrn9ngrou.jpg http://img.photobucket.com/albums/v204...

I had just realized I never psoted up a full setup of my turbo build.. so here goes HP: 150RWHP TQ: 163 RWTQ Engine: Stock Smallport 3 Rib Bluetop rebuilt 40k ago .020 oversize pistons New Main Bearings New Rod Bearings 3 Angle Valve Job Shaved Head Decked Block New Gaskets all around T-VIS Fully Fu...

try changing the gasket oring on the oil cap. Mine was leaking from there

If the manifold comes compelte with Throttle body, TPS, EGR, cold start injector, and the TVIS comes with complete vacuum lines and actuator, I would value it at like 130-150. The ecu probably no more than 35 bucks, and the harness for the engine usually goes for 100 bucks

your best bet is to head over to zilvia.net and ask over there, their fanbase is more knowledgable on real or fake seats

I have an Oldschool first gen AutoPower Roll Bar, not really a cage. But it fits nice and snug and i couldnt be happier with it. This thing didnt come with the bolt in plates, so i welded it in http://scontent-a.cdninstagram.com/hphotos-xaf1/outbound-distilleryimage5/t0.0-17/OBPTH/92008d820f1f11e280...

I think he meant Autozone. But to give you some real info. All you need is 10mm bolts normal metric pitch would work off any japanese car. You may need a handfull of 12mms. Most of the front interior panels require phillips head 1 or phillips head 2 screws. As far as clips go, if you dont care that ...

i just told you i hate my lightweight one My AASCO is 8lbs and looking for a stock HEAVY 212mm flywheel.

Looking for a stock 212mm flywheel. I have a lightweight one, and i hate it. Anyone got anything pickup or shipped to 93060?

Do you have pictures of the kouki door panels?

text me to 805-6124466

Looking for some good condition Blue door panels Kouki or Zenki doesnt matter! Picked up in SoCal preferred

Stock Bluetop 3rib with oversize pistons new main and rod bearings, and a tvis head with tvis fully functional.

Weakest of the weak haha

Just got back from tuning a few hours ago. Just like I suspected, the turbo got too hot for my BMC Reservoir and made a pinhole on it, so now I got no brake haha, but we were still able to finish the session. As soon as I got home i saw the box for the Turbo Blanket sitting on my doorstep :cry: if o...

Yeah thats the bad thing about running MS. Youre kinda left to do the work alone, or run the PNP system. I ended up going with MSPNP but i dont think they offer a GZE option. And about a year sounds about right for a shop. You gotta realize youre not the only one in there, and its a lot of work. You...

I drift my car at Willow. Suspension mods: Megan Coilovers AW11 Manual Rack NST Steering Spacer T3 Knuckles w/ TieRods T3 NCRCA Steel Braided Brake Lines Whiteline Panhard Bar TRD 2Way Diff Alignment: 0 Toe -3.5 Camber +2.75 Caster Wheel n TIre: Varrstoen V3 15x8 0 offset, 15x9 -5 Offset Toyo R1R 19...

Got one in Santa paula, CA not willing to ship. Its cut to fit LSD but is non LSD.

805-6124466

Looking for a BMC heatshield to go with my turbo setup. Show me what you got... 8056124466 shipped to 93060

Shitty video of it finally timed and idling on its own at 1100 http://img.photobucket.com/albums/v204/Tony777/th_MOV_9605_zpsd2bfa717.mp4 In good news, i have officially finished everything on my list and i am ready to go get tuned. I forsee a problem with Driving this on the street, the turbo gets ...

Has anyone ever shopped for an aftermarket carpet for our cars? All the ones i see at the Junkyard are torn to shreds or moldy as hell. Looking to see if anyones ordered one through websites like: http://www.stockinteriors.com/

We're back September 28, 2014
$125 Per Driver
GRIP and DRIFT event
Horse Thief Mile
Drivers meeting 7:30AM
Capping at 30 Drivers (15/15)

To register:
(805)612-4466 (text)
805LIDE@gmail.com (paypal)

More progress done today: To do list: Wiper arms Tape up, Ziptie, and Clean up my engine bay wiring. Rewire my JDM Bumper Lights Install Hood, Fenders, Bumper Wire wideband to Megasquirt Wire new Master Cylinder Brake Sensor Adjust Brake Switch for Tercel Booster Find 2 new Bellhousing Bolts Get a r...

Ive been struggling with getting an LC1 Innovate Wideband system to work, and it ended up being a bad o2 sensor. Well I decided to just scrap it and give it back to my friend and go a different route. Came up on an MTX-L and it was so much easier to work with and install. Definitely a nice gauge. Al...

If youre talking about the EMS, the 4th plug isnt used for the ae86 4AGZE, if you are gonna use it on your SR20, you need to buy the patch harness and wire it to whatever pins you need to use.

marley, i followed this thread on zilvia: http://zilvia.net/f/showthread.php?t=188356 You essentially need: 13mm Wrench 12mm Wrench Small Picks SMall Screwdriver T15 TORX GOOD snap ring pliers, like MATCO or SNAPON And mmm thats it, probly some PB Blaster for overnight soaking. And the kit i bought ...

Not sure if i had posted this before, but i blew the T25 because i used silicone instead of a gasket on the turbo oil dump which clogged the dump and blew the oil right through my seals. Well i had to tear it down and re ring the shaft, and put in new journals in there. Overall it took an afternoon ...

To Register: Email/Paypal: 805LIDE@gmail.com Call/Text: 805-6124466 Facebook event page: https://www.facebook.com/events/302864719875890/?ref_dashboard_filter=upcoming&source=1 We are back for the Fourth time this year! Get your cars ready fellas! DRIFT CLINIC Balcony Circuit $95 Per Driver 15 D...

**** it ill take a set in white

it isnt mine to sell, i gave it back to my friend who let me have it. If youre serious i can get in touch with him to see if he will sell it. Its a journal T28, not ball bearing.

text me 805-6124466

If it was cost effective, i would be in for a set. Its a pain in the ass, but to me it never warranted mirror replacement

After 2 weeks of trying to troubleshoot my MSPNP i got in touch with Russ at DIYAutoTune and he got my car to start in about 2 days! The man is legit and very kind! So glad DIYAT has a guy like him. Current issues: Will not stay idling (Possibly due to my IAC Blockoff plate??) Turbo is blown (Spits ...