This is my cam card

Mine is slightly different for exhaust

too high of a cam that will have this issue. can it be solved with a 16v battery?

I love a good story :) It doesn't address the question of IVC which actually has more effect on cranking compression. But I couldn't find a good story about IVC, so this will have to do for starters [emoji38] Cheers... jondee86 I once experimented with twin cam timing and setting it up by using a c...

totta crolla wrote:Valve clearances correct ?

Yes all correct

totta crolla wrote:How much valve lift a TDC (not compression) do you have ?

10.50mm nett valve lift

Sounds like a heap of compression for such long cams. Did you time the cams to the Kelford cam card ? The book says normal BT compression is 193psi, so maybe look at closing the intake cam a bit later to drop a bit of static compression. You might also want to look at retarding the ignition a bit t...

i know i can get more help here than posting in fB. so anyway i have a problem getting my engine to start. i spoilt 3 starters in 3 days! i had to tow the car in order to start it. when cranking, there will be times that the engine kicks back and flames coming out from intake. i have tried almost an...

The diameter of the flywheel itself between 200mm and 215mm set ups is the same, it's only the friction face diameter that's different. You won't lose or gain anything going between the two with power, torque or inertia. Just have more clamping area using a 215mm clutch and flywheel. Also no differ...

I saw the 4efte flywheel has 6bolts and 212mm. The clutch kit can be used in 4age. So was wondering if the OEM flywheel can be swapped to 7a crank

Will the 4e 6bolt flywheel fit the 7a crank?

Thanks

Are you referring to using an early 40mm crank? Then to a degree yes!! The 40mm (early 3rib) crankshaft is approx 700g's lighter and has been argued to be slightly better in some mild street builds. less friction vs. 42mm. I would also assume less friction/drag meant less heat. Also both cranks are...

How much lift can 20v OEM valve springs take? Are you concerned with coil bind or valve float? It also depends on how aggressive the cam profile is for valve float. I assume based on this question you are looking at buying some new cams? If so just bite the bullit and get some uprated supertech spr...

Possibility and No.

totta crolla wrote:

speedmaster wrote:I was told undersized crankshaft performs better than standard size. Anyone can correct me?

The person who told you, what was their explanation ?

It said they work like a stroker kit

I was told undersized crankshaft performs better than standard size. Anyone can correct me?

jdm86gtz wrote:When I bought my AE111 it had Toda 264 9.0mm cams on stock springs. I rebuilt the engine with new Toda springs though.

Hello

Did you ever do a dyno test?

How much lift can 20v OEM valve springs take?

Make sense.

morgan wrote:I was hnaware the 7afe was 2-5mm, im used to hearing 200 & 212 for the 4age's. Regardless, dont mix and match different size clutch and flywheels

maybe its 212mm my bad

is there and HP loss if i switch from 212 to 200mm?

My 7a flywheel is 6 bolt 215mm

saigon wrote:Looking for a distributor for a 20v silvertop if u have one or know of one contact me thanks

i have a blacktop distributor and plug cables selling together at $100

I have a few question on clutch system. 1. Does a 7A 200mm flywheel work with 215mm clutch? The reason i asked is i found an affordable light flywheel compared to Fidanza 215mm flywheel. was thinking if its ok or safe to match them together. 2. i was told that single/multi plate clutch kit does not ...

Happy new year.

All cam cover sold out.

Next batch will be $86 shipped

not much left, 1 or 2 units

Patch harness plug and play application for 4age to Emanage.

U$150 shipped. All brand new.

tbo wrote:I pm you for payment info but you didn't response please reserve 1 for me I can made payment as soon as you let me know your paypal account

There is no pm. But anyway my paypal is

Speed.master@live.com

Pls include your contact number as well.

tbo wrote:I pm you for payment info but you didn't response please reserve 1 for me I can made payment as soon as you let me know your paypal account

Ok let me check pm. Thanks and merry christmas

PDB wrote:$69 USD sent

Ok thanks. Merry Christmas

PDB wrote:If there is still 1 available I'll take it please, let me know and I'll PayPal the funds. I'm in the UK.

Thanks.

Ok i can book 1 for you until payment is made. Thanks