Search found 107 matches
- Sun Jun 05, 2016 10:10 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Air Bypass Valve...
- Replies: 3
- Views: 3756
Re: 4AGZE Air Bypass Valve...
Wow, that would be really cool if it was an adjustment screw..... not too many GZE's running around from what I've seen, those hunting for some extra psi from the SC12 have likely optted for the ABV mod as well. If you find out any additional information please post it back up here, I'd be very curi...
- Tue May 24, 2016 6:36 pm
- Forum: Want to BUY (seeking sellers)
- Topic: WTB - 4AGZE alternator and distributor for AW11
- Replies: 1
- Views: 1938
Re: WTB - 4AGZE alternator and distributor for AW11
Anyone? Bump.....
- Mon May 16, 2016 7:24 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB - 4AGZE alternator and distributor for AW11
- Replies: 1
- Views: 1938
WTB - 4AGZE alternator and distributor for AW11
As the title says, looking for a 4AGZE externally regulated alternator and distributor, I'm located in socal willing to do local pickup or ship at my expense.
HMU reply, email, pm, or text
Pjerroldjones@yahoo.com
- Paul 949) 872 - 4990
HMU reply, email, pm, or text
Pjerroldjones@yahoo.com
- Paul 949) 872 - 4990
- Sun May 08, 2016 10:55 pm
- Forum: AE86 Parts & Accessories
- Topic: AE86 parts for sale in MA/CT
- Replies: 4
- Views: 4400
Re: AE86 parts for sale in MA/CT
Do you still have the strut assemblies? I sent you an email as well. Thanks!
- Sat Mar 19, 2016 3:42 pm
- Forum: AE86 Parts & Accessories
- Topic: 4agze and other engine parts
- Replies: 3
- Views: 3363
Re: 4agze and other engine parts
Sent you an email about some parts, won't let me PM since I'm a new member apparently.
- Sun Mar 06, 2016 10:58 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
After adjusting the AFM air by pass screw located on the body of the AFM while the engine idled I managed to get the air fuel ratio to hold steady at stoichiometric, or at least varying between 14.5 to 15. With the AFRs at s much better level and idle adjusted to about 900rpm it was running extremel...
- Sun Mar 06, 2016 4:25 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
Slight update, upon further inspection the vacuum hose going to the vsv that should increase fuel pressure from the regulator was connected to a vacuum port on the intake that may have been partially blocked when we flipped the intake elbow on top of the throttle body 180° to face the front of the c...
- Sun Mar 06, 2016 1:12 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
5/16" lines from the tank to the rail, 1/4" return lines from the regulator to the tank, they do not vary in diameter, ask 5/16 from tank to rail and all 1/4" on the return. Not sure as to the exact lengths of the lines but it's all hard line with short lengths of fuel injection rated...
- Sun Mar 06, 2016 11:17 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
Alright, so got the new pump and also a wide band o2 sensor to monitor AFR's to possibly find out if it's a lean condition idle hunt problem. Unfortunately i didn't get a chance to take any readings while restricting the fuel flow by pinching a rubber hose with the old pump but this new pump seems t...
- Tue Mar 01, 2016 10:05 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
I will try pinching a rubber hose and record the pressure readings and look for any inconsistencies, I have a friend who works at an auto parts store who is going to do some digging around for a new fuel pump for me in the morning. My current pump is a 125 max psi and 38 gallon per hour pump, im loo...
- Tue Mar 01, 2016 8:16 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
I was just going by the FSM that said both pins should be reading 9-14v but anyway, not trying to jump around just trying to eliminate anything easy to find. So i got some gas and some pressure readings.. Readings are being taken from the rail with the pressure gauge connected to the cold start inje...
- Tue Mar 01, 2016 1:46 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
It's all starting to sound more likely to be a fuel issue than anything else. I tested ask the points at the ecu to measure the voltage received at the ecu connectors and everything was in spec with the excepting of one if the two iscv points - with the ignition on and engine off spec is 9-14V One w...
- Sun Feb 28, 2016 3:41 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
First of I'd like to thank you for taking the time to help me out like this, i really appreciate the input and advise i feel like I'm slowly sifting through the problems one by one. Checked resistance at the ecu terminals- IDL-E2 had continuity when closed and deflected to infinity when opened IDL-E...
- Sun Feb 28, 2016 10:55 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
Interesting, yes the tps differences between the GE and GZE are minimal. My harness has not been cut or tampered with regarding the tps, although I will investigate further to eliminate any possibility. I will continue checking the tps along with reading voltage inputs at the ecu and check for any i...
- Sat Feb 27, 2016 8:45 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
Re: 4AGZE idle hunt problems
Might be something useful in here... http://www.mr2australia.com/mr2play/tm.aspx?m=103064 Symptoms sound exactly like a 4AGE (N/A) with a blocked waxstat, but I don't know if those are used on the GZE. Cheers... jondee86 Thanks for the input! I did come across that in my searching, I used his techn...
- Sat Feb 27, 2016 11:36 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE idle hunt problems
- Replies: 22
- Views: 15026
4AGZE idle hunt problems
Hey club4ag! I've been on here for awhile but this is my first post, i looked here and on other sites for an answer but can't find many people who actually posted the solution to their idle problem. It's doing the infamous idle hunt as the title said, I've been talking to yoshimitsuspeed about this ...
- Fri Feb 12, 2016 5:25 pm
- Forum: TECH: Corolla AE86
- Topic: Ogiptech bellhousing?
- Replies: 1
- Views: 2569
Re: Ogiptech bellhousing?
I personally bought the ogiptech bellhousing and it works great! Very satisfied and Remy is a super cool and very helpful dude. I mated my bellhousing to the larger 225mm 4AGZE clutch pressure plate and flywheel and with a little bit ground down on one or two edges it worked with no problem, i dont ...