Search found 307 matches

by jdm86gtz
Thu Sep 22, 2016 1:27 pm
Forum: TECH: Corolla AE86
Topic: 1uz into Ae86
Replies: 6
Views: 6084

Re: 1uz into Ae86

Have you 12V at the injectors, the coils and the ecu when you crank over the engine?
If you do it should start
by jdm86gtz
Sun Sep 18, 2016 2:36 pm
Forum: OWNERS and BUILDERS
Topic: Eric's Free SR5
Replies: 54
Views: 37681

Re: Eric's Free SR5

carbd7age wrote:I miss all this :cry:


You know what to do so :D
by jdm86gtz
Sat Sep 10, 2016 5:37 am
Forum: TECH: 4A-GE ENGINE
Topic: We can get bearings to be able to fully rebuild SC12s and SC14s but it won't be cheap
Replies: 1
Views: 2913

Re: We can get bearings to be able to fully rebuild SC12s and SC14s but it won't be cheap

As you would say: why bother rebuilding an antiquated roots blower and just fit a turbo.
Do these suffer bearing trouble? I don't know how many miles are on my SC12 but I've put 90K miles on it, if it gave trouble I would fit a turbo.
by jdm86gtz
Sun Jul 24, 2016 2:25 pm
Forum: TECH: 4A-GE ENGINE
Topic: 20v bt 7age A/F ratios
Replies: 29
Views: 18927

Re: 20v bt 7age A/F ratios

I know ms can support vvt, i have my car running ms2 v3 that i built myself. But the pnp for a 4ag is for usdm 16v engines. The 93-95 mr2 pnp may work with the 20v, but there is very little about anyone using pnp for that. Check out the msextra forums, a majority use ms2/ms3 because it is simpler t...
by jdm86gtz
Mon Jun 27, 2016 6:09 am
Forum: TECH: Corolla AE86
Topic: Tips/tricks on getting my 30a fusable link block removed.
Replies: 2
Views: 2692

Re: Tips/tricks on getting my 30a fusable link block removed.

The fusible links on the battery terminal and held in by bolts, pop open the plastic side covers and use an 8mm socket on one side and a 10mm on the other.
by jdm86gtz
Sun Jun 05, 2016 11:54 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGZE Air Bypass Valve...
Replies: 3
Views: 3757

Re: 4AGZE Air Bypass Valve...

Here's the Cusco ABV I have fitted to my engine

Image
by jdm86gtz
Sun Apr 03, 2016 5:31 am
Forum: TECH: Corolla AE86
Topic: backside of waterpump tube
Replies: 6
Views: 4956

Re: backside of waterpump tube

That is the thermostat bypass pipe and you need 2 new o-rings on it.
by jdm86gtz
Fri Mar 18, 2016 6:31 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 173
Views: 166880

Re: notnilc20's 1986 ae86 Hatch build clean-up

You need to have the hole in the gasket so that the engine can breathe.
Follow the port and you will see it connects to the cam cover breather nipple.
by jdm86gtz
Thu Feb 25, 2016 2:48 pm
Forum: TECH: 4A-GE ENGINE
Topic: What is Blacktop's intake valve closing event??
Replies: 6
Views: 5425

Re: What is Blacktop's intake valve closing event??

There's a table down a bit on Bill Sherwood's page listing the 20V cams
http://www.billzilla.org/4agstock.htm
I could have sworn I saw the specs listed on a Levin&Trueno magazine or something like that
by jdm86gtz
Sun Jan 31, 2016 1:47 pm
Forum: TECH: 4A-GE ENGINE
Topic: Early vs Late 4AGE-20V Silvertop Intake ports
Replies: 8
Views: 8031

Re: Early vs Late 4AGE-20V Silvertop Intake ports

According to the EPC there is only one 20v head available from '91 to '95 11101-19365
by jdm86gtz
Sun Jan 31, 2016 5:34 am
Forum: TECH: 4A-GE ENGINE
Topic: Early vs Late 4AGE-20V Silvertop Intake ports
Replies: 8
Views: 8031

Re: Early vs Late 4AGE-20V Silvertop Intake ports

I can't remember which one is the earlier type manifold https://www.google.ie/imgres?imgurl=http://www.billzilla.org/20vinlet2.jpg&imgrefurl=http://www.billzilla.org/4agmods3.htm&h=385&w=800&tbnid=4bOkQkO3kOyXqM:&docid=VhR1NnNZu7HqyM&ei=ywuuVsv4AoWdPtH5mPAE&tbm=isch&v...
by jdm86gtz
Tue Jan 26, 2016 1:43 pm
Forum: OWNERS and BUILDERS
Topic: My recap and ongoing final stretch of building my Hatch
Replies: 164
Views: 143500

Re: My recap and ongoing final stretch of building my Hatch

The fuel feed hard pipe is 8mm or 5/16" and the return hard pipe is 7mm or whatever that is in imperial nonsense :lol:
That's on efi equipped AE86s anyway

Edit oh I guess the 1/4 fitting you used that I didn't bother reading worked ok. :oops:
by jdm86gtz
Mon Jan 18, 2016 5:08 am
Forum: TECH: Corolla AE86
Topic: AE86 16V - Auxiliary Air Valve...
Replies: 20
Views: 27897

Re: AE86 16V - Auxiliary Air Valve...

I came across this write up recently on how to completely strip the AAC valve and adjust it:
http://www.mr2.com/forums/threads/10453 ... adjustment
I haven't tried it yet as I will get someone to make up the tool required.
by jdm86gtz
Thu Jan 14, 2016 6:07 am
Forum: TECH: Corolla AE86
Topic: ae86 4agze supercharged help please!!
Replies: 6
Views: 6076

Re: ae86 4agze supercharged help please!!

I found that using the method jonndee86 suggested caused a jumpy rev clock needle any time there was an extra electrical load turned on, turn signals etc. I then changed 2 resistors and a capacitor in the rev clock circuit board and the needle is steady. Found this: http://forums.club4ag.com/zerothr...
by jdm86gtz
Thu Dec 31, 2015 6:02 pm
Forum: TECH: Corolla AE86
Topic: Restoring AE86 w/ 4AGE 16v + HKS ITB + Haltech E6X
Replies: 956
Views: 501023

Re: Restoring AE86 w/ 4AGE 16v + HKS ITB + Haltech E6X

I have fitted a Recaro SR seat to an AE86 rail, remove the oem seat from the rail (I think 2 bolts and 2 rivets from memory) and the spacing is correct for the earlier type SR seats (DC2 Integra type) I had to drill some holes obviously to match the Recaro seat mountings. I got paranoid though as it...
by jdm86gtz
Sat Nov 28, 2015 5:13 am
Forum: TECH: Corolla AE86
Topic: T50 gearbox - 2nd and 3rd TRD
Replies: 3
Views: 3497

Re: T50 gearbox - 2nd and 3rd TRD

Does anyone know, if i can replace my 2nd and 3rd gears only withthe TRD gears and counter gears only ? Is this possible, and i will have 1,4 and 5 stock but 2nd and 3rd TRD Sent from my SM-G900F using Tapatalk 1st, 2nd and 3rd gears on the the counter shaft are all 1 piece, whereas the TRD counter...
by jdm86gtz
Thu Nov 12, 2015 2:41 pm
Forum: OWNERS and BUILDERS
Topic: My recap and ongoing final stretch of building my Hatch
Replies: 164
Views: 143500

Re: My recap and ongoing final stretch of building my Hatch

It's AN-3 hose and Goodridge connections, I got them from a local rally parts shop.
by jdm86gtz
Wed Nov 11, 2015 2:26 pm
Forum: OWNERS and BUILDERS
Topic: My recap and ongoing final stretch of building my Hatch
Replies: 164
Views: 143500

Re: My recap and ongoing final stretch of building my Hatch

I mounted the bias valve setup inside the car on mine, using a JDM setup that has a separate T piece for the front and a pressure reducing valve for the rear. I routed the front hoses out through the 2 wiring grommets and joined the rear into the hard pipe by the handbrake. http://i192.photobucket.c...
by jdm86gtz
Wed Nov 04, 2015 1:24 pm
Forum: TECH: 4A-GE ENGINE
Topic: T50 Gearbox, Fragile !
Replies: 6
Views: 6588

Re: T50 Gearbox, Fragile !

What actually breaks in a T50 gearbox ? Parts wear out of course and I wonder how many 'broken' gearboxes are out there because something has just worn out. Personally I think the T50 is a cracking gearbox and mine stands up to all of the rally abuse I can throw at it. (now that I've sorted the wor...
by jdm86gtz
Fri Oct 09, 2015 8:48 am
Forum: TECH: Corolla AE86
Topic: T50 input shaft
Replies: 6
Views: 4862

Re: T50 input shaft

That looks to be the 5th gear bearing spacer, it goes between the 5th gear and the end bearing on the main shaft and is located from turning by a ball bearing.
It's a while since I changed a set of bearings in a T50 so haven't had the input bearing off but I still have an old one in a box somewhere.
by jdm86gtz
Thu Oct 08, 2015 1:42 pm
Forum: TECH: Corolla AE86
Topic: T50 input shaft
Replies: 6
Views: 4862

Re: T50 input shaft

There are 6 different size spacers available from 1.825mm to 2.375mm
by jdm86gtz
Wed Oct 07, 2015 1:30 pm
Forum: TECH: Corolla AE86
Topic: AC Idler Pulley Advice
Replies: 7
Views: 6048

Re: AC Idler Pulley Advice

The bearing is replaceable as I replaced mine a few years ago.
by jdm86gtz
Sat Sep 19, 2015 4:28 pm
Forum: TECH: 4A-GE ENGINE
Topic: Need a final a answer on blacktop 20v exhaust can gear pin
Replies: 4
Views: 3845

Re: Need a final a answer on blacktop 20v exhaust can gear p

Yes it's at TDC, look at the timing marks(highlighted with Tipex) close to each other on the 2 pulleys also if the cam cover was fitted the upper timing mark would be inline with the cover mark.
by jdm86gtz
Thu Sep 17, 2015 3:26 pm
Forum: TECH: 4A-GE ENGINE
Topic: Need a final a answer on blacktop 20v exhaust can gear pin
Replies: 4
Views: 3845

Re: Need a final a answer on blacktop 20v exhaust can gear p

Image


Some pulleys have 2 dowel slots as far as I remember
by jdm86gtz
Mon Sep 14, 2015 2:21 pm
Forum: TECH: Corolla AE86
Topic: Does AE86 Water pump assy comes with both the water pipes?
Replies: 2
Views: 2539

Re: Does AE86 Water pump assy comes with both the water pipe

That won't come with the thermostat inlet or head outlet even though they are shown in the picture, it says refer to another page for their part numbers.
by jdm86gtz
Thu Sep 03, 2015 6:03 am
Forum: TECH: Corolla AE86
Topic: T50 gearbox help
Replies: 5
Views: 4073

Re: T50 gearbox help

You only need to remove the 3rd/4th gear hub and one snap ring to get at the 3rd gear baulk ring.
by jdm86gtz
Wed Sep 02, 2015 5:49 am
Forum: TECH: Corolla AE86
Topic: T50 gearbox help
Replies: 5
Views: 4073

Re: T50 gearbox help

Is it blocked? Chances are the baulk ring isn't gripping the taper on the gear any more due to wear.
If you split the box and compare the baulk ring grip with slight inward pressure applied on 3rd and then on a different good gear. Pop out the layshaft when you do this.
by jdm86gtz
Sun Aug 23, 2015 6:44 am
Forum: TECH: 4A-GE ENGINE
Topic: 20V on MS2 idle issue
Replies: 4
Views: 2901

Re: 20V on MS2 idle issue

I rebuilt the engine and thoroughly cleaned everything.
I calibrated the TPS 0% and 100% figures and told the tuner to double check it.
I'm thinking it's just an odd software issue.
by jdm86gtz
Sat Aug 22, 2015 5:33 am
Forum: TECH: 4A-GE ENGINE
Topic: Some nice parts here
Replies: 10
Views: 7310

Re: Some nice parts here

101_gze wrote:Anyone know what transmission they are using?


There's a few 4WD Corollas here in Ireland and usually use Celica GT4 running gear, which is an E series transmission.
The 2wd front subframe isn't compatible with a 4WD transmission so it would be easier to start with an OEM 4WD Corolla.
by jdm86gtz
Sat Aug 22, 2015 5:07 am
Forum: TECH: 4A-GE ENGINE
Topic: 20V on MS2 idle issue
Replies: 4
Views: 2901

Re: 20V on MS2 idle issue

Idle was perfect with the Toyota ecu.
It doesn't stall every time, it's a somewhat random issue but usually happens downshifting from 3rd to 2nd rolling into a roundabout etc.