to the top

Keeping it with the old school look this time...wrinkle textured valve cover (belts not actually pink its a red Toda belt)

Oil temp and pressure gauges sold.....rest still for sale

Up to the top

What do they look like?

I have a set of Toyo RA1s on my car now but have another set of watanabes with some ventus z214s on them

Ok fellas, engine work is done at the shop....had to get a new block, the other was already 83mm and re-honing it would of put it out of the sidewall specs needed so got a new block, bored for 83mm, installed everything and had my head bolted on...over the past week or two I've been slowly bolting e...

to the top

to the top

Weir does t sell cheap kits they are all high quality CNC cut gear sets. Your right he doesn't sell 4.56 because not to many people use that ratio, there's not much of a performance improvement with that ratio as it's slightly taller then stock where as 4.77 there's a bigger difference. His kits als...

going to be a hard sale when the are available for half that price here...http://www.weirperformance.com/finaldrivegears.html

Greddy Gauge $$$$$$OLD

sorry fixed the email it was wrong

Have the following parts for sale...if interested email me at nuffsaid02@aol.com...paypal is the same email. Apexi hybrid intercooler: Used in good condition...measurements are shown in the picture....will fit ae86 with some mechanical massaging...to big for my setup so won't be using it...$250 Plus...

I will give u 3500 for it...not trying to lowball u but there's another KP61 on here for sale that's all stock for 2000$ and besides flares and rims yours seems to also be all stock..in the past there's been some super clean modified KPs with 4ags sell for 45-5000$...message me if interested I will ...

Looking for a bare blacktop block with main caps...anyone got one for sale? nuffsaid02 at aol.com

Oops sorry nuffsaid02 at aol.com

yeah if you have a good distributor and don't mind shipping email me nuffsaid @ aol.com

No they are side feed only for 20vs

To the top

Looking for a good working distributor for a 20v ....dont need the cap or rotor just the distributor itself...if you have one email me please with price nuffsaid02 at aol.com

to the top

260s at 10.7mm lift intake and 210s at same lift for exhaust although the exhaust was flowed at 35mm bore and now it's 38mm so probably a few more cfm from the 3mm size increase. These numbers are at 28" water also..

Have the following stuff for sale that either came off my 20v or are spares that I don't need or won't be using for the next setup.... BN s2000 Cops with new plugs and connectors- $200 shipped never used http://i62.tinypic.com/21ezq0x.jpg 20v alternator bracket modified to fit rwd application with c...

new Pistons are in and block is in the shop...83mm 10.5c/r with ceramic coating and friction reduction coat on skirts...strange to see how big a difference 83mm bore makes with compression dome height...first picture is 83mm 12.6c/r with a normal 20v dome then at 83mm 10.5c/r the pistons are surpris...

of course you stated all that with your edited posts specifically the one made yesterday after you were called out lol....I will leave this post alone now but as one of the oldest members on this forum my personal recommendation to anyone considering this item....pass....theres plenty of signs of da...

lol you can never offend me....by the looks of your engine i doubt very much it has a TRD pump from the 80's or 90s and if it did it would be very used by now...and another member didn't provide a link to your pump he provided a link to a TRD manual two years newer than the one you referenced so eit...

But there is...its everyones responsibility to make sure the community stays safe and nobody who might be less knowledgable gets suckered....if your parts are genuine you wouldn't have a problem showing proof of what your claiming to sell...no flame in that....more like being an honest seller...

LOL ok buddy......... good luck with your sale...for a zero mile engine sure looks like a dirty used engine with rusty damaged parts, if i was the buyer id ask to see the HKS crank stamp before you got my money....Hint Hint buyers....

TRD never made a high volume oil pump just to clarify things