Find out who you are going to have tune it, and get the setup they are most comfortable with. Not all shops are willing to tune with megasquirt or some off-brand that is rarely used. By now, pretty much all standalones are created equal. The 4AG is very simple, no need for insane traction control or...

SidekickChuck wrote:I think most do a complete swap which includes the s2k digital dash.

this. you run the s2000 cluster too. No, you don't need to change the fuel sending unit, the AE86 is actually very accurate when paired with the s2000 cluster.

Is this kevin bacon stephan? That stuff is rubber that is on the shaft. Just weld it more bro

hachiroku ae86 wrote:also will i have to adjust the valves or will they be fine

just check that the valve clearance is within tolerances, if not ya gotta buy some shims

16v sensors do not work. Get an oxygen sensor from a N/A SW20 MR2. The 16v one is a single wire type, the MR2 one is a newer style that has four wires: signal, ground, heater power, heater ground control. You can get the universal MR2 one as well and just wire it up, either way.

From my experience, here's what I've seen go bad: -transistor in the ECU burns up (see above link) -incorrect MAP sensor used -knock sensor is bad -incorrect ignitor -20v distributor caps suck, they burn up often. Look inside to see if there are white/grey burn trails. The coils are all pretty unive...

S2000 cluster in my 4AG corolla, poormans STACK. Recalibrated to be accurate. It's turning the T50 mechanical signal to a digital signal retaining all the OEM parts that is the fun part.

You can run the stock silvertop bottom end with the stock 16v head. The ST pistons are junk though when paired with the head, valve reliefs are way off etc etc. It's called a 1620 engine. Just a heads up, you can get high comp 16v pistons from rockauto for $84 for the set of four. Built a motor a fe...

What's the code?

Looking for someone who wants to part ways with their buddyclub spec 2 exhaust for the AE86. Looking for pickup in SoCal or possibly shipped via PayPal and tracking number. If I can't find anyone I'm going to buy brand new so yeah, lmk.

The MFactory 5th gear I'm waiting to hear back on. I can get most of the T50 rebuild parts from the dealer still. Synchros, hubs and some roller bearings are around $330. The aftermarket rebuild kits have been discontinued as far as I know. Yeah, still work in palm springs. once I get a hold of a t...

Oliver wrote:I've got a pair of rear JDM zenki brackets for sale. Let me know.

http://club4ag.com/forums/viewtopic.php?f=15&t=1002

price?

Looking for a set of JDM Zenki trueno rear bumper brackets OR a Zenki Trueno rear bumper. LMK.

The MFactory 5th gear I'm waiting to hear back on. I can get most of the T50 rebuild parts from the dealer still.
Synchros, hubs and some roller bearings are around $330. The aftermarket rebuild kits have been discontinued as far as I know. Yeah, still work in palm springs.

Sorry to bust in on ur thread but does anybody know the cost to make A bt 20v harness for a sr5 ...I have both but don't know the cost Thanks in an advance $275 + shipping here. http://cache.gawker.com/assets/images/12/2008/12/340x_Jones-Trucks.flv.jpg "Those other guys gunna change you four-f...

JSPfab.com sells the kit

I do dem. $200 labor, you supply parts. Me and T50s, we go together like peas and carrots.

If it's like anything else OBX makes, it wont fit. Just buy a used OEM and shim it up a little.

probably broke an axle

Why no S2000/SR20 or even 3SGE Toyota section in technical? What gives? hmmm, wasn't it you who told me this is an FR-S site now :D this IS an FRS site now lol but we can still have 3SGE and a bunch of people are S2k/SR20 swapped too. It'll keep that swap traffic to those sections instead of cloggi...

Luis, you still have this hood? lmk

Why no S2000/SR20 or even 3SGE Toyota section in technical? What gives?

I guess I'm not seeing the big deal here with STAR. I've read the info on the system, from what I can tell: -Before we had Smog Test and Test-Only Centers and Gold Centers -We just merged Test Only and GOLD centers together to make STAR centers -Test only centers need to get higher certification to ...

v33sonata wrote:Anyone on a P/N or car to use the lower radaitor hose from? I doing a BT 20v AE86

You just use any lower radiator hose for the 16v Corolla GTS RWD 85-87. You need to use the RWD thermostat housing.

AFM is working fine then. The circuit open relay is behind the glovebox, yellow connector 5 pins. It's actually two relays in one. Half of the relay runs the fuel pump during cranking, the other half runs the engines after cranking. So if one half of the relay fails the car will only get fuel when c...

My GTS does the same. They may have been replaced at one point in time with a non-baffled SR5 tank. I'm planning on running a surge tank later down the road to fix this. The surge tank is like a separate, smaller gas tank that works with the main tank. You use a low flow fuel pump to feed gas into t...

check the circuit open relay and the AFM. If the relay goes bad it will supply fuel for cranking but wont keep the fuel pump running after the engine starts, letting the engine run out of fuel and die. The relay operation is also controlled by the AFM. The relay doesn't kick on until it sees that th...

So I'm about to completely rebuild a 20V ST engine, and I'm curious if anyone knows about Toyota specifications for the break-in schedule and the best strategy for seating piston rings. I'm also dropping in ARP hardware to hold the whole assembly together, and I'm curious if anyone has experience w...

What oil weight is used in this motor? Also I am using the stock water pump does anyone know of a lower radaitor hose that works well? and lastly does anyone have vacuum diagrams for the BT? Thanks I've personally always ran Honda synthetic blend 10w30 with Toyota "xxxF1" filter. Most peo...

HASport AE86 - do all the components in your oil cooler list work with a 16v 4age as well? Thanks It does work on the 16v engine, but if you have a 16v that came with an OEM oil cooler, like on the GTS corolla, you need to disassemble the OEM sandwich plate on the block. Remove the banjo fitting an...