Search found 345 matches
- Sat Feb 23, 2019 9:51 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 87850
4AGZE Injectors Not Firing
Hi all, After my rebuild and trying to get the car running I have issues with fuel. I have fuel pressure, fuel and a spark. The car cranks but does not turn over. I have measured the voltage on all 4 clips off of the injectors, all disconnected at the same time and found that 3 out of 4 have 12v on ...
- Wed Jan 30, 2019 1:29 am
- Forum: TECH: 4A-GE ENGINE
- Topic: GZE/GE Fuel Pump Issues
- Replies: 4
- Views: 5075
Re: GZE/GE Fuel Pump Issues
The COR in the boot, I cannot remember if I have the bracket it slots onto, actually bolted to the chassis. Does that act as the ground?
- Tue Jan 29, 2019 7:54 am
- Forum: TECH: 4A-GE ENGINE
- Topic: GZE/GE Fuel Pump Issues
- Replies: 4
- Views: 5075
GZE/GE Fuel Pump Issues
Hi all, My motor is back in my engine after it's rebuild. I have had it cranking and running by spraying carb cleaner into the intake, but i have no power to my fuel pump or oddly the oil pressure switch. The fuel gauge is working, but this didn't before and I lost my dash lights, but they are now b...
- Wed Oct 03, 2018 6:10 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Spark Plug Gap
- Replies: 6
- Views: 6721
Re: 4AGZE Spark Plug Gap
I found two broken spark plugs pre rebuild as I bought the grade 6 plugs by accident.
- Tue Oct 02, 2018 5:26 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Spark Plug Gap
- Replies: 6
- Views: 6721
Re: 4AGZE Spark Plug Gap
So the mr2 manual saying 1.1mm is incorrect? The gap would also make sense as i was suffering from a mysterious misfire before i took my engine apart for rebuild.
Thanks Jondee
Thanks Jondee
- Mon Oct 01, 2018 6:57 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Spark Plug Gap
- Replies: 6
- Views: 6721
4AGZE Spark Plug Gap
Hi,
What is the preferred gap for spark plugs on the 4AGZE?
Also, does anyone have a part number for plugs required when running the big pulley and ABV mod?
Cheers
What is the preferred gap for spark plugs on the 4AGZE?
Also, does anyone have a part number for plugs required when running the big pulley and ABV mod?
Cheers
- Tue Aug 07, 2018 3:22 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE 02 sensor
- Replies: 4
- Views: 4801
- Tue Jul 31, 2018 5:24 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE 02 sensor
- Replies: 4
- Views: 4801
Re: 4AGZE 02 sensor
It seems mine has only 1 wire.
- Mon Jul 30, 2018 4:18 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE 02 sensor
- Replies: 4
- Views: 4801
Re: 4AGZE 02 sensor
Ok cool thanks for the advice will check when I get home.
- Mon Jul 30, 2018 1:22 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE 02 sensor
- Replies: 4
- Views: 4801
4AGZE 02 sensor
Hi all, I managed to break my original O2 sensor at the weekend as my engine fell off of it trolley. Do all SC sensors have 4 wires? My car is a conversion so I do not know what year my engine is in case there was a transition from 1 to 4? Any help appreciated as I've found one on Twosrus I would li...
- Fri Jul 06, 2018 7:25 am
- Forum: Want to BUY (seeking sellers)
- Topic: WTB A/C manifold and bracket GTS
- Replies: 5
- Views: 5047
Re: WTB A/C manifold and bracket GTS
I think I have one off of my GZE
- Thu Jun 28, 2018 11:55 am
- Forum: 4A-GE Engine Parts
- Topic: 4agze & 4age parts
- Replies: 0
- Views: 2734
4agze & 4age parts
Hi, I have various parts for sale in the UK, postage is for UK but let me know if you are interested if abroad and i'll get you costs. https://www.ebay.co.uk/itm/232820994118?...1558.l2649 https://www.ebay.co.uk/itm/232820986793?...1558.l2649 https://www.ebay.co.uk/itm/232820965101?...1558.l2649 htt...
- Thu Jun 28, 2018 8:50 am
- Forum: 4A-GE Engine Parts
- Topic: 4AGE & 4AGZE Bits for Sale
- Replies: 0
- Views: 2548
4AGE & 4AGZE Bits for Sale
Hi, I have various parts for sale in the UK, postage is for UK but let me know if you are interested if abroad and i'll get you costs. https://www.ebay.co.uk/itm/232820994118?...1558.l2649 https://www.ebay.co.uk/itm/232820986793?...1558.l2649 https://www.ebay.co.uk/itm/232820965101?...1558.l2649 htt...
- Fri Jun 01, 2018 8:09 am
- Forum: 4A-GE Engine Parts
- Topic: 16V 4AGE Parts
- Replies: 2
- Views: 4429
Re: 16V 4AGE Parts
Hi all, I have some parts left over from an engine strip down. All parts are located in the UK, so please give me your post/zip code for delivery costs. 81.5mm NPR (branding) 9.4:1 pistons & 42mm Conrods - I used these in my engine for 12,000 with no issues - £150 + delivery 4AGZE 16v Crank Pul...
- Tue Apr 24, 2018 6:52 am
- Forum: 4A-GE Engine Parts
- Topic: 16V 4AGE Parts
- Replies: 2
- Views: 4429
16V 4AGE Parts
Hi all, I have some parts left over from an engine strip down. All parts are located in the UK, so please give me your post/zip code for delivery costs. 4AGE 16V 42mm Conrods - £100 + delivery 81.5mm NPR (branding) 9.4:1 pistons - I used these in my engine for 12,000 with no issues - £50 + delivery ...
- Sun Mar 11, 2018 3:26 pm
- Forum: 4A-GE Engine Parts
- Topic: Engine Block Components 4AGE 16v
- Replies: 0
- Views: 2774
Engine Block Components 4AGE 16v
Hi, I have finally collected my old engine block from my mates garage, after swapping to 4AGZE last April! I cannot remember what the crank was like in terms of condition or if I had any noises prior to the conversion. If I get time this week I will strip it to have a look. Its a 7-rib block which h...
- Mon Mar 05, 2018 3:47 am
- Forum: Want to BUY (seeking sellers)
- Topic: 42mm Conrods & Matching Caps
- Replies: 1
- Views: 2083
Re: 42mm Conrods & Matching Caps
I've bought some now.
- Tue Feb 27, 2018 7:35 am
- Forum: Want to BUY (seeking sellers)
- Topic: 42mm Conrods & Matching Caps
- Replies: 1
- Views: 2083
42mm Conrods & Matching Caps
Hi all,
I need a replacement set of conrods with matching caps.
To be delivered to Essex, UK.
Anyone?
Many thanks,
Alex
I need a replacement set of conrods with matching caps.
To be delivered to Essex, UK.
Anyone?
Many thanks,
Alex
- Fri Jan 19, 2018 2:57 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 8.9 CR 4AGZE pistons in my AW11
- Replies: 3
- Views: 4440
Re: 8.9 CR 4AGZE pistons in my AW11
So it's just down to timing?
- Mon Jan 15, 2018 12:42 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 8.9 CR 4AGZE pistons in my AW11
- Replies: 3
- Views: 4440
8.9 CR 4AGZE pistons in my AW11
Hi,
Im in the process of rebuilding my 4AGZE engine and I have replaced my 8.0:1 pistons with the later 8.9:1 pistons.
Is this going to be a mistake?
Cheers for any advice
Alex
Im in the process of rebuilding my 4AGZE engine and I have replaced my 8.0:1 pistons with the later 8.9:1 pistons.
Is this going to be a mistake?
Cheers for any advice
Alex
- Mon Dec 11, 2017 10:55 am
- Forum: 4A-GE Engine Parts
- Topic: 4AGZE Knock Sensor
- Replies: 2
- Views: 4402
4AGZE Knock Sensor
Hi all,
Upon removing my 4agze engine from my AW11 at the weekend, the knock sensor has become damaged and I need a replacement.
These are not available from Toyota anymore so i'm hoping someone has one?
Many thanks
Alex
Upon removing my 4agze engine from my AW11 at the weekend, the knock sensor has become damaged and I need a replacement.
These are not available from Toyota anymore so i'm hoping someone has one?
Many thanks
Alex
- Fri Dec 01, 2017 2:26 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 8994
Re: 4AGZE Pistons
To be honest I've rinsed the internet looking for 4AGZE pistons and I just cannot find anything forged or cast, it doesn't come up with many options at all. I guess the world is running low on these parts as they are getting a bit old now
- Fri Dec 01, 2017 3:20 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 8994
Re: 4AGZE Pistons
I see what you are saying but given how difficult it is to get a hold of a good GZE block, i'd rather not put some cheap pistons in and destroy my block if they were to give up. Some things I've bought which are equivalents but not going to go down that route with the internals.
- Thu Nov 30, 2017 3:59 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 8994
Re: 4AGZE Pistons
I've found that there are a few companies in New Zealand do 4AGE and 4AGZE performance parts.
SQ-Engineering and MRPLtd do the 8.9 pistons that I'm after. Will have to weigh up the cost if I can actually get them from Toyota at all anymore.
Cheers guys.
SQ-Engineering and MRPLtd do the 8.9 pistons that I'm after. Will have to weigh up the cost if I can actually get them from Toyota at all anymore.
Cheers guys.
- Wed Nov 29, 2017 8:38 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Pistons
- Replies: 10
- Views: 8994
4AGZE Pistons
Hi all,
Any idea where I can get a set of the 4AGZE 8.9 pistons?
Other than Toyota of course.
Cheers
Alex
Any idea where I can get a set of the 4AGZE 8.9 pistons?
Other than Toyota of course.
Cheers
Alex
- Sat Nov 25, 2017 4:28 am
- Forum: TECH: Corolla FWD / MR2
- Topic: 4AGZE Conversion
- Replies: 19
- Views: 26088
Re: 4AGZE Conversion
I have a corolla t-sport clutch 212mm, fits perfectly and is good value.
- Fri Nov 03, 2017 5:25 am
- Forum: TECH: Corolla FWD / MR2
- Topic: 4AGZE Conversion
- Replies: 19
- Views: 26088
Re: 4AGZE Conversion
I have some blue top cams in my garage I think but I have seen this as a low cost option instead of buying aftermarket.
- Sun Oct 29, 2017 4:45 am
- Forum: TECH: Corolla FWD / MR2
- Topic: 4AGZE Conversion
- Replies: 19
- Views: 26088
Re: 4AGZE Conversion
Hi, I have an AFM 4AGZE converted AW11. I have the larger 176mm fensport pulley but run on standard cams. I personally do not feel that it needs bigger cams. It idles really well and I have had higher lift and longer duration cams on my N/A before and it just didn't run right at idle. I did consider...
- Fri Oct 13, 2017 6:07 pm
- Forum: 4A-GE Engine Parts
- Topic: 4AGE Fuel rails
- Replies: 2
- Views: 3788
Re: 4AGE Fuel rails
Small Port fuel rail is sold.
- Fri Oct 13, 2017 1:54 am
- Forum: 4A-GE Engine Parts
- Topic: 4 AGZE blocks
- Replies: 8
- Views: 9107
Re: 4 AGZE blocks
Postage to the UK?