Hi trent I'll see you at the next event... you better be killing it

Here is a "bare minimum" list of everything "necessary" to get an SR5 running with a GTS swap: Longblock Wiring Harness (underdash and engine harness, including fuse boxes) All accessories for the engine (fuel rail, injectors, oxygen sensor, AFM, etc) ECU GTS transmission bellhou...

It is one of my favorite cars I've ever ridden in, maybe someday he'll let me drive it lol. It's stupid fast.

Ah, I never had a Weber carb, just the stock one.

I figured I'd dump a few more photos in here. Spare block that I need to build... http://i6.photobucket.com/albums/y243/PygmyX/AE86/2012-04-07_22-27-16_272.jpg surge tank... http://i6.photobucket.com/albums/y243/PygmyX/AE86/2012-04-06_14-28-27_993.jpg http://sphotos.xx.fbcdn.net/hphotos-prn1/543517_...

hiiiiiii brennnnddaaannn its momo.

That's weird. I never used a regulator on my 12S, and it never flooded it. I put an inline fuel pressure gauge and it stayed at 7psi, and flowed the perfect amount for teh stock carb.

Thanks! I've had my corolla for almost two years now. The first year I did pretty much nothing with it. My GF at the time wasn't too keen on me spending money on my cars because we had plans of tying the knot, but then our relationship turned south and my corolla became my therapy lol. Since last ma...

I installed a Mr Gasket 12S in my SR5 for a short while. I had it ziptied to something in the engine bay lol. Worked great, no problems. I had a toggle switch for it.

I've had Cusco parts on my Subarus in Utah, where we have salt and other gross crap during hte winter. My control arms held up great, no issues with the threads stripping or getting terribly corroded. I have a rear sway bar and rear stabilizer bar installed on another one of my vehicles, and althoug...

According to the EPA (not state government, FEDERAL GOVERNMENT) as long as your vehicle is older than 1990, you can swap whatever engine in whatever car you want. That being said, 1990+ EPA regulations state that as long as the engine was offered in that vehicle (doesn't matter trim, just make and m...

The carburetor probably needs to be rebuilt. That, and check to make sure your cat isn't clogged. Mine was, and I could never get it to idle right. Then the motor blew up on me.

I have a surge tank that I will be installing, here is a diagram of what needs to happen. http://i6.photobucket.com/albums/y243/PygmyX/AE86/fuelcellandsurgetank-1.jpg I ended up cutting a hole in my trunk to allow for the fuel lines to come in... http://i6.photobucket.com/albums/y243/PygmyX/AE86/201...

rear windows. They are impossible to find.

No light? What light? Does it crank over? Does it do anything? If it cranks, go rent a noid light set from you local auto parts store (oreilly, autozone). Check to see if your injectors are getting signal from the ECU. Go buy a spark tester, undo one of your plug wires, then connect the spark tester...

SR5 to GTS swap and keeping the SR5 tank? Or just using an inline fuel pump on your 4AC? I ran a Mr Gasket 12S when I had the 4AC. Worked flawlessy. All you do is find a good place to mount it, ground out the black wire, take the red wire and install an inline fuse holder and switch, then wire it to...

I love this build thread.

So... for about a week or so I've been tracking down wiring issues with my low beam headlights. High beams work, but my low beams dont. I was told by several people that the SR5 front lighting harness works with a GTS underdash harness, but it does not. It is a ground controlled circuit, so there is...

Welp, looks like I'm going to have to type up my thread again because of the new site. I picked up this red SR5 coupe for $300, in a little town in Southern Utah. Non-running, but totally worth it. http://i6.photobucket.com/albums/y243/PygmyX/AE86/P1010016.jpg http://i6.photobucket.com/albums/y243/P...