Search found 299 matches

by ToeKnee805
Mon Mar 23, 2015 10:36 pm
Forum: TECH: Corolla AE86
Topic: request for steering rack source / info.
Replies: 7
Views: 1319

Re: request for steering rack source / info.

supposedly the aw11 mr2 rack is shorter on the passenger side, but it is interchangeable with an ae86 unit. (As in will fit in place of)
by ToeKnee805
Sun Mar 22, 2015 10:51 am
Forum: TECH: Corolla AE86
Topic: Rack Spacer with depowered rack?
Replies: 1
Views: 515

Rack Spacer with depowered rack?

I couldnt find a definitive answer on this, so before i get one, im looking to find out if i can run a rack spacer (NST, AJPS) on a depowered Zenki Rack. I know the old BV#2 kit was compatible but thats no longer available. Ive tried contacting AJPS and NST themselves but i havent heard back.
by ToeKnee805
Fri Mar 20, 2015 3:41 pm
Forum: Fun Talk
Topic: Old Forum Data.
Replies: 23
Views: 5735

Re: Old Forum Data.

+1 i think i frequent the old forums more than i do these.
by ToeKnee805
Fri Mar 20, 2015 3:37 pm
Forum: TECH: Corolla AE86
Topic: manual rack help
Replies: 10
Views: 2181

Re: manual rack help

thats very weird, i never ran stock rods with an aw11 rack, but my t3 ones have equal amount of threads on each side. Could it be that you have mismatched inner tie rods?
by ToeKnee805
Tue Mar 17, 2015 11:14 pm
Forum: 4A-GE Engine Parts
Topic: Complete AC, Power Steering, Cruise Control and EGR.
Replies: 13
Views: 3080

Re: Complete AC, Power Steering, Cruise Control and EGR.

110 shipped? Just because the compressor is HEAVY. Text me if youre interested. Im shipping out some stuff in the next coming days.
805-6124466
by ToeKnee805
Sun Mar 15, 2015 11:23 pm
Forum: 4A-GE Engine Parts
Topic: Complete AC, Power Steering, Cruise Control and EGR.
Replies: 13
Views: 3080

Re: Complete AC, Power Steering, and EGR.

The rebel86, tnt im located in Southern California
by ToeKnee805
Sun Mar 15, 2015 10:13 pm
Forum: Want to BUY (seeking sellers)
Topic: Wtb a bunch of stuff for my ae86 please look =D
Replies: 5
Views: 1208

Re: Wtb a bunch of stuff for my ae86 please look =D

where are you located i have a working AC compressor, and all the lines and condenser
by ToeKnee805
Fri Mar 13, 2015 1:30 pm
Forum: TECH: 4A-GE ENGINE
Topic: High idle 2k RPM
Replies: 7
Views: 1189

Re: High idle 2k RPM

@jondee haha yeah I did that back in the day. Looped PS lines are no fun. They're capped off correctly.

@yoshimitsu thanks for the input dude! I'll search for a rear housing if not I'll go Blockoff route
by ToeKnee805
Fri Mar 13, 2015 11:29 am
Forum: TECH: 4A-GE ENGINE
Topic: High idle 2k RPM
Replies: 7
Views: 1189

Re: High idle 2k RPM

After looking at my engine closely I found out I have an FX16 rear water outlet behind my head, and the coolant line that flows to the throttle body is capped off. From the rear housing I only have 1 big hose running to the heater core and the small one isn't there(that goes to the wp and tb) I have...
by ToeKnee805
Thu Mar 12, 2015 8:32 pm
Forum: TECH: 4A-GE ENGINE
Topic: High idle 2k RPM
Replies: 7
Views: 1189

High idle 2k RPM

Rebuilt Bluetop Largeport with EGR Eliminated. When cold i turn my car on cold it idles at 2000RPM. I drive it around the street and the idle stays the same. Already checked for Throttle body stuck open and i force it closed with my hands(At the pulley) and nothing happens. One thing i do notice is ...
by ToeKnee805
Tue Mar 10, 2015 10:17 pm
Forum: 4A-GE Engine Parts
Topic: Complete AC, Power Steering, Cruise Control and EGR.
Replies: 13
Views: 3080

Re: Complete AC, Power Steering, and EGR.

zenki sir, came off an 85GTS. I wasnt aware there was differences.
by ToeKnee805
Mon Mar 09, 2015 11:39 pm
Forum: Want to BUY (seeking sellers)
Topic: wtb: Levin Panels
Replies: 2
Views: 722

wtb: Levin Panels

FRp, Copy, Metal, anything you got Levin im interested in buying.
Brackets, Side Markers, Corner Lights, Fogs, Headlights whatever.

Txt me: 805-6124466
by ToeKnee805
Mon Mar 09, 2015 11:11 pm
Forum: AE86 Parts & Accessories
Topic: used modified trd 4-2-1 header $80
Replies: 9
Views: 2393

Re: used modified trd 4-2-1 header $80

Ifall other sales fall through hit me up 805-6124466 im local about 45 mins.
by ToeKnee805
Mon Mar 09, 2015 11:05 pm
Forum: AE86 Parts & Accessories
Topic: Random Parts, need gone. Make offers.
Replies: 2
Views: 1291

Re: Random Parts, need gone. Make offers.

pics of the turbo manifold
by ToeKnee805
Mon Mar 09, 2015 10:17 pm
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Re: Misfire when revving, but not at idle

Yeah the pulse damper wasnt bouncing up and down with my revs that was causing me to starve.(Big ass banjo crew)
by ToeKnee805
Mon Mar 09, 2015 12:34 am
Forum: 4A-GE Engine Parts
Topic: Complete AC, Power Steering, Cruise Control and EGR.
Replies: 13
Views: 3080

Complete AC, Power Steering, Cruise Control and EGR.

AC got thrown away everything else sold thank you!
by ToeKnee805
Sun Mar 08, 2015 7:00 pm
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Re: Misfire when revving, but not at idle

FIXED!!

The fuel rail feed regulator was stuck closed, starving me of fuel. This is what happens when engines are stored outdoors I guess
by ToeKnee805
Sun Mar 08, 2015 3:27 pm
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Re: Misfire when revving, but not at idle

I pulled the injectors and #3 was cracked in half. I replaced the injector and the misfire is now gone. My problem now is that the engine won't rev. It will idle fine but it it just doesn't want to rev when I blip the throttle. It will choke out. If I put a can of brake cleaner on it it will rev ama...
by ToeKnee805
Sat Mar 07, 2015 8:11 pm
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Re: Misfire when revving, but not at idle

Ok guys an update: Ignition is advancing like it should CLeaned MAF - No Change Tested MAF per FSM, MAF is Good Pinched off Fuel Return - No Change Found vacuum leak @ Cold Start Injector - Fixed Lead - No Change Deactivated TVIS (To Lean Car out) - Seems to rev a bit better, but still misses Cat is...
by ToeKnee805
Fri Mar 06, 2015 9:05 am
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Re: Misfire when revving, but not at idle

Yessir it misses equally on all 4 cylinder if I remove an injector or a plug wire.
My timing is at 10btdc shorted and 16btdc non shorted.

Haven't tried pinching the return, testing the AFM, or a compression test. I think that's where I'm headed next. I'll post results as soon as I get them in!
by ToeKnee805
Thu Mar 05, 2015 10:49 pm
Forum: TECH: 4A-GE ENGINE
Topic: Misfire when revving, but not at idle
Replies: 14
Views: 2971

Misfire when revving, but not at idle

So the car has a recently rebuilt (by previous owner) engine. When i received it it had 0 compression due to the Exhaust cam being 180* off. I re-timed the camshafts and it fired right up. The car idles perfectly and is timed at 10BTDC. Heres the problem when i go to rev the engine with anything mor...
by ToeKnee805
Fri Feb 27, 2015 10:43 am
Forum: OWNERS and BUILDERS
Topic: ToeKnee's TE72 resto attempt
Replies: 13
Views: 3362

Re: ToeKnee's new TE72 Track Toy

@toy86 if you look at the cam gears there's 2 slots where the cam can go in. They're about 180 from eachother. So when the intake cam would open the valves the exhaust cam would too. And then the dizzy was installed 180 out.

Clouds: yes technically you are correct
by ToeKnee805
Fri Feb 27, 2015 12:33 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: NST AE86 Steering Spacer. MAXIMUM ANGLE For Drift Cars!
Replies: 36
Views: 7722

Re: NST AE86 Steering Spacer. MAXIMUM ANGLE For Drift Cars!

will these fit an 85 power rack that has PS removed?
by ToeKnee805
Fri Feb 27, 2015 12:19 am
Forum: OWNERS and BUILDERS
Topic: ToeKnee's TE72 resto attempt
Replies: 13
Views: 3362

Re: ToeKnee's new TE72 Track Toy

Flat towing the coupe past my house to take a pic lol http://img.photobucket.com/albums/v204/Tony777/Eight-Six/39433632-4BE8-43B7-9735-77F2C9107647_zpsgmpet2yp.jpg http://img.photobucket.com/albums/v204/Tony777/Eight-Six/CE0090B5-6A9E-4B47-BDAD-55BE03FF0066_zpsn17qvypt.jpg The previous owner said th...
by ToeKnee805
Tue Feb 24, 2015 12:55 am
Forum: OWNERS and BUILDERS
Topic: ToeKnee's TE72 resto attempt
Replies: 13
Views: 3362

Re: ToeKnee's new TE72 Track Toy

I havent decided what to do, so i put the TE72 on craigslist, and if it sells to pay off some debts i have I will build the AE86, if it doesnt sell then i will tear up the 86 and build the TE haha. i gave myself a deadline, we will see in a few days.
by ToeKnee805
Sun Feb 22, 2015 8:50 pm
Forum: OWNERS and BUILDERS
Topic: ToeKnee's TE72 resto attempt
Replies: 13
Views: 3362

Re: ToeKnee's new TE72 Track Toy

Well after saving some money i was able to find a perfectly clean 85 GTS with a blown 4AGE. I will be pulling the entire GTS drivetrain and wiring to swap into the TE72. Such a shame, that a perfectly clena zenki will be sacrificed for this, but it has to be done! If anyone knows someone looking for...
by ToeKnee805
Tue Feb 10, 2015 8:52 pm
Forum: TECH: Corolla AE86
Topic: AE86 16V - Alternator Wiring Basics...
Replies: 8
Views: 10179

Re: AE86 16V - Alternator Wiring Basics...

damn this post gets no credit!

About to swap a 16v to my TE72 and definitely bookmarking this. Thanks for the info!
by ToeKnee805
Wed Feb 04, 2015 6:13 pm
Forum: 4A-GE Engine Parts
Topic: AASCO 8lb flywheel
Replies: 4
Views: 1132

Re: AASCO 8lb flywheel

Forgot to update, flywheel has been sold
by ToeKnee805
Tue Feb 03, 2015 5:51 pm
Forum: Want to BUY (seeking sellers)
Topic: 3TC bellhousing for t50
Replies: 0
Views: 216

3TC bellhousing for t50

Looking to 5spd my TE72 with a T50. Need the matching 3TC bellhousing. Shipped or pickup near 93060 thanks!
by ToeKnee805
Mon Feb 02, 2015 11:52 pm
Forum: OWNERS and BUILDERS
Topic: ToeKnee's TE72 resto attempt
Replies: 13
Views: 3362

ToeKnee's TE72 resto attempt

Whatsup guys! Im sure you guys are all familiar with my old Turbo 4AGE Hatch build... if not go take a gander.... http://club4ag.com/forums/viewtopic.php?f=7&t=11075 Well recently, i was having second thoughts on continuing to track the 86. It has a straight body now, has nice paint, and i reali...

Go to advanced search