Search found 67 matches

by broku-hachi
Mon Mar 02, 2020 1:39 pm
Forum: Want to BUY (seeking sellers)
Topic: Wtb ae86 3door interior piece
Replies: 0
Views: 3002

Wtb ae86 3door interior piece

Hi,

Looking for the driverside interior trim(garnish) that spans the A pillar to the B pillar listed as P/N 62440 in link below. Black in color, with no cracks or chips. Must be for a hatch.

https://parts.lakelandtoyota.com/images ... BF475D.jpg

Thank you very much
by broku-hachi
Tue Feb 11, 2020 10:20 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Re: Noise when turning

Thanks for the quick reply. The leak was actually strong enough to where I could pinpoint the area pretty easily. I didn't think about using a flame though, I’ll have to remember that one. I forgot to mention earlier that I have a suspicion that some brake fluid could have found its way into the boo...
by broku-hachi
Tue Feb 11, 2020 8:50 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Re: Noise when turning

Update: While bleeding my brakes the last time, I ended up blowing the seal for the master cylinder :D . I bought a new master, as well as some new front calipers and a different brand of brake pads(that actually fit). After installation the clattering noises from the front wheels went away. I poppe...
by broku-hachi
Wed Jan 22, 2020 5:38 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Re: Noise when turning

Took out the brake pads. On the inner front right pad, there was uneven wear(only one half of the pad). Inner side of the rotor had slight groove worn in; enough to feel while running fingers across it. Compared the new pad with the old, and the design was slightly different. The new brake pad “tabs...
by broku-hachi
Wed Jan 22, 2020 1:21 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Re: Noise when turning

Ahh, thanks for the help. I will go inspect, and update back.
by broku-hachi
Tue Jan 21, 2020 6:15 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Re: Noise when turning

I torqued the nut to 21 ft-lbs, backed it off and torqued it to 21 ft-lbs again. While torquing I rotated the wheel.

Grabbed the torque spec from the FSM.
by broku-hachi
Mon Jan 20, 2020 8:18 pm
Forum: TECH: Corolla AE86
Topic: Noise when turning
Replies: 12
Views: 3198

Noise when turning

Whats up, Wondering if anyone has any advice. I just finished replacing front and rear pads and rotors, as well as the front wheel bearings. While I was breaking in the new pads, I would hear a noise when making sharp turns. Sounds like a clatter/ grinding noise, and it is more predominant on the ri...
by broku-hachi
Tue Jan 07, 2020 7:30 pm
Forum: Want to BUY (seeking sellers)
Topic: Wtb: ae86 black front seat belts
Replies: 0
Views: 3103

Wtb: ae86 black front seat belts

Looking for driver and passenger side front seat belts (black) in good condition( non-cracked plastic trim piece)

Thanks for any help.
Image
by broku-hachi
Mon Oct 21, 2019 11:59 pm
Forum: Want to BUY (seeking sellers)
Topic: Wtb: ae86 rear calipers w/mounts
Replies: 0
Views: 3041

Wtb: ae86 rear calipers w/mounts

Looking for a pair of stock rear calipers for ae86 with mounting brackets.

Thanks for the help
by broku-hachi
Tue Jul 16, 2019 10:44 pm
Forum: TECH: Corolla AE86
Topic: Interior trim ae86
Replies: 5
Views: 2723

Re: Interior trim ae86

damn, looks like they are different. oh well i guess i will just have to bust out the crazy glue. lol
by broku-hachi
Mon Jul 15, 2019 10:05 pm
Forum: TECH: Corolla AE86
Topic: oil cap and shift knob identification (Vintage)
Replies: 3
Views: 2297

Re: oil cap and shift knob identification (Vintage)

My buddy has that cap on his 1967 Corona with a 3rc engine. I'm not 100% positive but I believe they were nicknamed "onigiri "oil caps because they resemble rice balls
by broku-hachi
Mon Jul 15, 2019 7:28 pm
Forum: TECH: Corolla AE86
Topic: Interior trim ae86
Replies: 5
Views: 2723

Re: Interior trim ae86

If someone out there with a coupe has the time and could do me a solid, can you look at the part numbers on your trim. It would be greatly appreciated.

The P/N's on my pieces are 62431-12040 and 62432-12030.

Thanks for any help.
by broku-hachi
Mon Jul 15, 2019 7:24 pm
Forum: TECH: Corolla AE86
Topic: Interior trim ae86
Replies: 5
Views: 2723

Re: Interior trim ae86

Thanks for the reply AE86Kai
Its interesting, cross referencing with my current pieces, none of the p/n match what is listed. It must be because the "oh ****" handle is on the opposite side for the rhd 86's.

Also i didnt realize until now, but it looks my garnishes are from a ae85 lol.
by broku-hachi
Tue Jul 09, 2019 11:15 pm
Forum: TECH: Corolla AE86
Topic: Interior trim ae86
Replies: 5
Views: 2723

Interior trim ae86

https://parts.lakelandtoyota.com/images ... BF475D.jpg

Quick question, is the roof trim (garnish) 62440/62430 interchangeable between hatch and coupes?
by broku-hachi
Wed May 08, 2019 8:17 pm
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 2724

Re: Front suspension question

Corner i believe, but i could be wrong.

Ill keep your tip in mind hahaha.
by broku-hachi
Wed May 08, 2019 7:58 pm
Forum: TECH: Corolla AE86
Topic: Front suspension question
Replies: 10
Views: 2724

Front suspension question

whats up, was wondering if some one could help me out with a question regarding spring rates. So in hawaii, if you modify your car you have to get a reconstruction permit in order to pass safety inspections and such. The inspectors do a jounce test to see if you have acceptable suspension travel. Ri...
by broku-hachi
Mon Mar 25, 2019 9:10 pm
Forum: TECH: Corolla AE86
Topic: Any one good with oem radios?
Replies: 7
Views: 1998

Re: Any one good with oem radios?

ahhh. Do I just check for continuity for the speaker outputs?

It's funny, I've been looking for some cassettes all over in my house for the past few days but no luck. :lol: I don't think I've ever been so eager to find one.
by broku-hachi
Mon Mar 25, 2019 9:10 pm
Forum: TECH: Corolla AE86
Topic: Any one good with oem radios?
Replies: 7
Views: 1998

Re: Any one good with oem radios?

I found a pinout, which I believe is for memory. You wouldn't happen to know if that needs a separate 12v supply do you?
by broku-hachi
Sun Mar 24, 2019 9:27 pm
Forum: TECH: Corolla AE86
Topic: Any one good with oem radios?
Replies: 7
Views: 1998

Re: Any one good with oem radios?

Thanks for the tip. I was able to power it up successfully.

No sound output yet though. When using the tuner, will I hear static even without an antenna connected?
by broku-hachi
Wed Mar 20, 2019 12:01 am
Forum: TECH: Corolla AE86
Topic: Any one good with oem radios?
Replies: 7
Views: 1998

Any one good with oem radios?

Went to a yard and was able to pick a USDM oem radio/tape player from a 1984 sr5 corolla. Trying to figure out how to wire this sucker up, but from what i can tell the wiring diagram I am using does not seem to be for the right model/year(1986 electrical diagram). The wire colors don't match the dia...
by broku-hachi
Mon Jan 07, 2019 10:05 pm
Forum: Fun Talk
Topic: After market hatch question
Replies: 8
Views: 3761

Re: After market hatch question

Thanks for the replies. I've just been thinking about some options. I've contacted several parts dealers, and shipping is a little too outrageous for my blood. I already started cutting the rot from my original hatch, but it's real far gone. I was able to find another spare hatch that was rusty as w...
by broku-hachi
Wed Aug 29, 2018 1:04 am
Forum: Fun Talk
Topic: After market hatch question
Replies: 8
Views: 3761

Re: After market hatch question

thanks for the reply. I've been leaning more towards frp because of cost, but shipping is so crazy out to the islands that I was thinking what the hell spend the extra bucks. We do have a lot of pot holes out here though, so I guess that is something to think about as well. hahaha From your experien...
by broku-hachi
Sun Aug 26, 2018 2:40 am
Forum: Fun Talk
Topic: After market hatch question
Replies: 8
Views: 3761

After market hatch question

My hatch is pretty rusty and beat up, and I was thinking about going aftermarket. For any one who has bought a Seibon CF hatch, do they all come with a pre-drilled hole for the rear windshield wiper? All of the web sites I've been looking at use the same stock photo with an existing hole. On a side ...
by broku-hachi
Thu Jun 21, 2018 10:33 pm
Forum: Fun Talk
Topic: Rust specks on windshield
Replies: 2
Views: 2655

Re: Rust specks on windshield

Thanks for the tip, I'll look into it.
by broku-hachi
Thu Jun 14, 2018 8:43 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Re: Need help identifying some seats.

Haha, damn bro. Maybe the local cops are cool because they're so many old school Toyota fans out there :) If I don't keep my bride brackets, I'll sell you the Driver's side I have, it's brand new. Nah the car has been de-registered for a while. Working on getting everything legal and road worthy ag...
by broku-hachi
Fri Jun 08, 2018 8:53 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Re: Need help identifying some seats.

Thanks for the info cloudstrife. Yah at first I thought that purple was just faded black and I didn't think it would match, but my rear seats are so faded they actually do prettty well haha. Lucky for me these seats were in a car that probably just sat in a garage since the 90's so I don't suspect t...
by broku-hachi
Thu Jun 07, 2018 8:44 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Re: Need help identifying some seats.

Right onn, I might give that a try.
by broku-hachi
Wed Jun 06, 2018 8:54 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Re: Need help identifying some seats.

I would like to throw these in my car, but haven't been able to make up my mind yet. I'm not sure if I want to spend the money seat rails for some old seats. Do you have any fitment issues with the size of the seats?
by broku-hachi
Tue Jun 05, 2018 9:14 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Re: Need help identifying some seats.

Are you running yours in a 86?
by broku-hachi
Mon Jun 04, 2018 9:06 pm
Forum: Fun Talk
Topic: Need help identifying some seats.
Replies: 12
Views: 3775

Need help identifying some seats.

Whats up everybody, need some help identifying a pair of bride seats that was given to me. As far as I can tell they are two different models. I believe one is a brix and one maybe an ergo? I know there are different generations of each type of brix and ergo, and was wondering if anyone would be abl...

Go to advanced search