Search found 29 matches

by Mehmaddict
Tue May 05, 2020 6:20 am
Forum: TECH: 4A-GE ENGINE
Topic: Ecumaster Classic For 4age Blacktop?
Replies: 0
Views: 3177

Ecumaster Classic For 4age Blacktop?

Hello everyone!
I have blacktop 4age freshly build.Any one use Ecumaster classic for it?
Could you send me base map ?

Thanks alot!
by Mehmaddict
Mon Oct 01, 2018 6:10 am
Forum: TECH: 4A-GE ENGINE
Topic: Rebuilding 4AGE 20v BT
Replies: 0
Views: 2698

Rebuilding 4AGE 20v BT

Hello everyone, Unfortunately my engine dead. You can watch from here: (Turkish but you can understand) https://www.youtube.com/watch?v=6OS4mD2nd5M&t=1s I bought whole engine parts from Toyota, original OEM parts. https://www.youtube.com/watch?v=MWa06ObzvGc&t=1s Starts 5.53 :| What are the i...
by Mehmaddict
Tue Apr 10, 2018 12:09 am
Forum: TECH: 4A-GE ENGINE
Topic: Blacktop shutsdown while pressing clucth
Replies: 2
Views: 3716

Re: Blacktop shutsdown while pressing clucth

Thanks everyone , It's all about ISCV issue. Removed, solved. made custom part for it.
by Mehmaddict
Mon Mar 26, 2018 10:01 am
Forum: TECH: 4A-GE ENGINE
Topic: Blacktop shutsdown while pressing clucth
Replies: 2
Views: 3716

Blacktop shutsdown while pressing clucth

Hi everyone. I have 86 swapped Blacktop 20V running with Vems Ecu. When you rev on first gear, engine shutsdown while pressing clucth. If you drive normally no problem. Plus interesting thing is when you rev the engine and stop the car, Starter motor doesnt work. But starts perfectly when cold.I don...
by Mehmaddict
Fri Nov 03, 2017 8:55 am
Forum: TECH: 4A-GE ENGINE
Topic: 4age cooling system
Replies: 3
Views: 6277

Re: 4age cooling system

I had the same problem, My problem is air blocked in heater system. When you install the new water pump, MAybe there is some air in your heater system, it will affect your water flowing. I tried this. Park somewhere a vehicle with the front upright. Turn heater to hot position. Dont start the car wa...
by Mehmaddict
Wed Nov 01, 2017 11:46 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)

https://www.youtube.com/watch?v=Ezh2p_qzOA0
Hello, First Test Video
Max Rev Limited to 6000
VVTI off.

I will check timing again, When we set 10 degree in diagnostic mode, Mark must be 16 degree?

Btw with this setup car runs perfectly and smoothly.
by Mehmaddict
Sun Oct 22, 2017 11:19 pm
Forum: TECH: 4A-GE ENGINE
Topic: RWD water relocation kit opinions?
Replies: 7
Views: 8419

Re: RWD water relocation kit opinions?

No problem mate, Some hints for you before install:

Check 2 sensor at the back and ready cables for them, It is very difficult to work here.

But It will be very hard to install this kit with the engine still in the car, Good luck!
by Mehmaddict
Sat Oct 21, 2017 1:35 am
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 13388

Re: Weird Radiator Problem

Thanks for replies guys, Today I will try to fix it!
by Mehmaddict
Fri Oct 20, 2017 3:36 am
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 13388

Re: Weird Radiator Problem

I went to service today and recognized my heater is not working. We took it off heater hose. water didnt come up(when car is running). They told me water pump is not power enough for this radiator setup. But lots of people use this radiator. Maybe my water pump doesnt work properly or my heater radi...
by Mehmaddict
Wed Oct 18, 2017 11:29 pm
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 13388

Re: Weird Radiator Problem

btw I'm using standalone ECU and SQ Relocation Kit.
by Mehmaddict
Wed Oct 18, 2017 11:29 pm
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 13388

Re: Weird Radiator Problem

Thank you all guys. If it is possible you can mail to me thank you!

msadikunal@gmail.com
by Mehmaddict
Wed Oct 18, 2017 2:16 am
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 13388

Weird Radiator Problem

https://image.ibb.co/h75Bkm/fgh.jpg Hello, me again with new problem. We swapped 4AGE 20V to ae86. And I have Mishimoto fan and radiator kit for ae86. We mount a adaptor and fan temp sensor to upper radiator hose. When we start the engine, Temp is good but problem is my fans are almost always worki...
by Mehmaddict
Fri Oct 13, 2017 2:12 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)

totta crolla wrote:My pleasure, glad it worked out for you.
Nice car and engine by the way !


^_^ Thanks!!
by Mehmaddict
Thu Oct 12, 2017 11:35 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)

Hello and thank you all guys.. I set timing at 8 degree(Our fuel in Turkey is 95 Octane, car runs perfectly at 8 degree), after diagnostic mode we can see 15-16 degree (which is good). Distribitor at advance position.(clockwise) And ECU mode we setted 29 degree at trigger wheel setup. Idle at 1100 r...
by Mehmaddict
Wed Oct 11, 2017 2:03 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

Yes correct but adjust the ecu to match the engine. Ok but sorry I'm newbie, how can i know my engine timing? Is it for 10? You will need a timing light, a small bright mark (white paint) on your bottom pulley at '0' (TDC) and a reference mark on the engine. See post above. There are 1001 videos on...
by Mehmaddict
Wed Oct 11, 2017 1:33 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

totta crolla wrote:
Mehmaddict wrote:So for understanding, We have to see same ignition timing engine and ecu?


Yes correct but adjust the ecu to match the engine.



Ok but sorry I'm newbie, how can i know my engine timing? Is it for 10?
by Mehmaddict
Wed Oct 11, 2017 12:44 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

So for understanding, We have to see same ignition timing engine and ecu?
by Mehmaddict
Tue Oct 10, 2017 11:16 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

PROJECT UPDATE: Turn crankshaft 4 time (to make sure) Match 3 points at cams. We put a screwdriver on Piston1. When at 3 marks matched position , screwdriver rising to max position. Then paint 0 degree at crank pulley, set timing to 10 degree.. Glowing looks gone, tested 15 min, we can touch headers...
by Mehmaddict
Tue Oct 10, 2017 7:16 am
Forum: General Accessories and Parts
Topic: JDM DIGITAL CLUSTER
Replies: 15
Views: 26120

Re: JDM DIGITAL CLUSTER

Mystery says no one can install these on LHD 86 :D
by Mehmaddict
Tue Oct 10, 2017 7:13 am
Forum: TECH: 4A-GE ENGINE
Topic: RWD water relocation kit opinions?
Replies: 7
Views: 8419

Re: RWD water relocation kit opinions?

Hello,
I'm using this kit. It's perfect.
Easy to install, good quality,

My website is Turkish but you can check how its fit to my 20v blacktop:

https://ae86project.com/2014/12/29/20v-alisverisi/
by Mehmaddict
Tue Oct 10, 2017 7:06 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

Hmmmm.... have you confirmed that the piston is @ TDC when you are checking cam timing?? Crank key should be pointing straight up... but even that can still be off. Only way to KNOW TDC is with a piston stop, and a timing wheel. There is also something wrong in the blacktop manual (I remember a thr...
by Mehmaddict
Tue Oct 10, 2017 5:49 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

I m not sure either but http://3.bp.blogspot.com/-bcaSs4AtCK4/Tea4bIKDl0I/AAAAAAAAAWw/i0p6f4vJv7o/s1600/15installcamgearmarks.jpg I think when cams matched engine is at tdc position ( If 0 degree means TDC) We tried by using ECU whole day, nothing, still glowing... Because we dont know the advance s...
by Mehmaddict
Tue Oct 10, 2017 5:12 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

My theory is: In tdc position paint new mark at 0 degree on Crank Pulley, that is what I have got.. :(
by Mehmaddict
Tue Oct 10, 2017 5:10 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

I'm using Beast. Turkish brand but same as VEMS.
by Mehmaddict
Tue Oct 10, 2017 4:11 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

We can control Coils on ECU. The car is working perfect (looks) But problem is glowing...
Image

So in this position it is TDC right?
by Mehmaddict
Tue Oct 10, 2017 3:58 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

Woav ! Thank you man, I will try this tonight.
Thanks for fast reply, you are rock.
by Mehmaddict
Tue Oct 10, 2017 3:22 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

Re: 4AGE 20V MANIFOLD GLOWING! HELP

Thanks for reply. We blocked the VVTi for the first run, There is not notch for 4age 20v onT3 Crank pulley, the tell me about positions I tried them It s wrong When we painted at 12:00 position, TDC dont match. So I want the try this, please tell me I'm doing right or not I dont want to blown the en...
by Mehmaddict
Mon Oct 09, 2017 11:53 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)
Replies: 28
Views: 23522

4AGE 20V MANIFOLD GLOWING! HELP (SOLVED)

Hello all, I'm new here and I need your help.. I'm restoring a levin 86.. https://ae86project.files.wordpress.com/2017/01/img_0558.jpg?w=1075 and swap 4age 20v engine. https://ae86project.files.wordpress.com/2017/09/img_68651.jpg?w=1075 Using Standalone ECU, IK20 Iridium Sparks, VW Polo Gti Coil, Ev...
by Mehmaddict
Wed Jul 22, 2015 7:55 am
Forum: Want to BUY (seeking sellers)
Topic: WTB Levin Fender Light
Replies: 0
Views: 1547

WTB Levin Fender Light

Hi all!

I need Levin Fender Light Left/Driver Side (EU)

Need international shipping,(Turkey) i can pay via Paypal

Thanks all!