Search found 4 matches

by 77ra29gt
Mon Aug 17, 2015 5:37 pm
Forum: TECH: 4A-GE ENGINE
Topic: Carbureting the 4AGE essentials
Replies: 134
Views: 65981

Re: Carbureting the 4AGE essentials

You can remove those. They are just guides for aligning the t-vis. I'm not running no spacer(s) on my carb intake manifold, I just had to change to shorter bolts and studs because the stock bolts are too long and were designed to accommodate the t-vis and stock intake plenum. Thank you sir! Not sur...
by 77ra29gt
Fri Aug 14, 2015 6:16 am
Forum: TECH: 4A-GE ENGINE
Topic: Carbureting the 4AGE essentials
Replies: 134
Views: 65981

Re: Carbureting the 4AGE essentials

Good Morning, I am very new to the 4age world. I have a bigport and a t50 that I'm thinking about putting into my 77 celica ra29. I have removed the intake and t vis as I will be running dcoe's. so a few questions Can the carb manifold be bolted on without the tvis plate or the t3 spacer i've seen?...
by 77ra29gt
Wed Aug 12, 2015 7:26 am
Forum: TECH: 4A-GE ENGINE
Topic: Carbureting the 4AGE essentials
Replies: 134
Views: 65981

Re: Carbureting the 4AGE essentials

Okay, I just made some adjustments on the MSD. I initially had the dizzy locked out and a "retard curve" set at 25deg retard from 500-1500rpm then slope to 0degs retard at 4000rpm. It ran good but lost power at the upper end. I set the MSD to 0degs flat line and then set my idle timing to...
by 77ra29gt
Wed Aug 12, 2015 7:00 am
Forum: TECH: 4A-GE ENGINE
Topic: Carbureting the 4AGE essentials
Replies: 134
Views: 65981

Re: Carbureting the 4AGE essentials

Good Morning, I am very new to the 4age world. I have a bigport and a t50 that I'm thinking about putting into my 77 celica ra29. I have removed the intake and t vis as I will be running dcoe's. so a few questions Can the carb manifold be bolted on without the tvis plate or the t3 spacer i've seen? ...

Go to advanced search