doing a throttle body swap but need a spare oem throttle body for conversion. Looking for 4agze throttlebody, J-pipe, and supercharger inlet (pipe bolted to throttlebody) via paypal only shipped to WI 53235 http://img.photobucket.com/albums/v685/mAgGoT414/129074757y1CloWuY_zps293a2832.jpg

Need a E58 Transmission vehicle speed sensor analog (not digital) willing to pay via paypal shipped to 53235 Wisconsin. PM me for my email or phone number. THANKS! Here is a picture of what I need.

While doing basic research I discovered that the 4AGZE intake manifold is insanely restrictive and can be replaced with a 4AGE small port intake manifold with some modification (but no grinding/drilling etc) but a great start is to replace the throttle body with that of a 4AGE small or big port whic...

Need a C52 transmission vss vehicle speed sensor analog for ae92 transaxle mine is broken! Can pay via paypal shipped to wisconsin 53235

For anyone wondering how this turned out, I removed all the tape and wire loom and took apart my diag port to follow my "OX" black wire to my oxygen sensor. On my harness the black wire behind the OX terminal ends up going into a thick gray wire into the loom and back to a black wire. This...

Ok thanks for the reply. If someone could upload a pic of the plug and wires coming out it would be helpful Im going to try and trace the OX wire from the diag port and see where It ends up. Im working off an MR2 diagram is it the same as ae92 for wire colors and routing?

http://img.photobucket.com/albums/v685/mAgGoT414/Mobile%20Uploads/20140507_190754_zps0gximeax.jpg http://img.photobucket.com/albums/v685/mAgGoT414/Mobile%20Uploads/20140507_190802_zpsy32on9hi.jpg I have the ae92 harness, computer, and sensors with ae101 engine. I looked up diagram for 88 mr2 GZE an...

4agze ae92 Levin 1988 I have a flash code for O2 sensor. No sensor is installed in aftermarket exhaust. Supposed to have 4 wire plug cant find it! Only one I found is a round single black wire gray plug on left side. Will post pic later of plug.

I replaced the elbow closest to the throttle body and the battery with a Optima red top and it started right up, thanks!

I was told by previous owner thaf when starting in the cold the silicone elbows on boost piping collapse so I pulled the first one off the throttle body, hooked up my jump pack and it cranked really slow. Cranked again then the battery sparked now I have no dash lights, radio, warning lights, headli...

Picked up a beautiful AE92 Levin GT-Z with a AE101 small port 4AGZE engine swap with C56 trans. Car ran fine on the way home but I noticed the stop lights where stuck on. I pulled out the plugs from the lights and 2 days later properly adjusted the stop switch. Now the battery is dead, no worries I ...