In the end it depends on the knock limit and exhaust gas temperatures.

Yea i figure the oil squirters were the real reason for the extra volume needed. On that note i may also see what i can rig together using a 4ag pump and a local welding shop.mabye an aluminum flange can be welded in and reinforced a bit. I still want to make the obd2 style crank pickup location via...

Spark ok? Fuel delivery/pressure ok?

I'd like to know anyone's experiences running a 4a/7afe oil pump on their 4ag. IIRC the pressure specifications are the same but after opening up a couple of used pumps from an 87 mr2 and a 97 ae100 corolla (4afe) I've measured the pump gear thickness at 8mm for the 4age pump (square tooth design) a...

Any GTS fuel lines?

Do you have the GTS fuel lines lying around by any chance?

I've been thinking about this lately as a solution to my timing issues. I will be installing MS2 fuel injection soon and I want a stable crank trigger that doesn't require running without lower timing covers or single row oem crank pulleys. I'm a bit concerned about running a 4afe/7afe pump on my 4a...

Is the HVAC panel still available? how much would it be shipped to 75214?

Just a little home made upgrade I made to fix the whole bike carb throttle size difference issue. I wish CAD parts weren't so damn expensive or i'd just get someone to CNC mill one, but this will do nicely. Just need to find smaller hardware to attatch the two throttle wheels... http://puu.sh/kvnjq/...

A word to the wise. If/when using the MSD Tach Adapter, do not mount it in the passenger compartment… the buzz it creates is annoying as all hell! Jus moved mine out to the eng conpartment today, SOOO much better!!! I've gotten used to it but yea some days I want to move it out into the engine comp...

turboae92 wrote:I want the t3 crank wheel, my zip code 3374.

trigger wheel is pending atm but I will let you know if its back up

Might add some more things to this later...

Brand new Aisin Water pump for a 4AC engine. I purchased this as a kit in order to use the rear thermostat housing for my car, so I do not need the water pump. Doesn't come with the gasket. $30 http://puu.sh/cFauy/16d9e072d1.jpg http://puu.sh/cFawF/f9f4e708d5.jpg Powerstop Ceramic Brake pads. These ...

Do you have a 4age RWD A/C compressor bracket? or a good compressor and bracket?

Longshot but is the third member for sale?

How much would it cost to get the camber plates shipped to 75214? Would these work with the T3 coilover conversion kit?

Dang... I have a 6.7inch Celica GT rear end that im thinking this will fit in with the axles shaved... Problem is I'm having trouble finding anyone who's done this sucessfully before... Axle widths are zenki ae86 spec so it should work if the length is right, but I'm just not sure. Plus assuming thi...

Alright Installed some poly front lower control arm bushings and i'm going to remove my rear bar for the autocross this sunday. I know it won't matter much since i'm still at stock suspension, but hopefully I can at least get rid of the wheelspin on corner exit. That ****'s annoying. Also thanks on ...

Do any companies make cheap adjustable spring seats for the rear? or just spring seats to correct rear ride height if i get some lowering springs for the rear ?

Thanks for the info zoom. I'm not trying to be fully competitive or anything, just mostly for fun and some friendly competition with the locals. One thing that concerns me is the whiteline bar, It says its a 20mm bar, which is 4mm smaller than my current GTS front bar (iirc). Do the adjustable posit...

All bushings replaced except front and rear control arm bushings. im getting front soon

I'm planning on refreshing my current suspension. Now that I'm in FSP I can go kind of wild, but I'm limited to my budget and daily driver concerns. Requirements 1. Daily driver friendly- I'm not a fan of harsh rides and the road to my job is VERY bad (all the shops in the area use it for checking s...

Just ran some calculations to see how much It would cost today (Inflation) http://www.dollartimes.com/inflation/inflation.php?amount=12000&year=1986 GTS with $12,000 USD Sticker price in 1986 IF SOLD BRAND NEW 2014: TODAYS Value: $25,586.34 Annual Inflation: 2.74% Total Inflation: 113.22% So ne...

Are the pistons press fit? or free floating with c clips?

My engine is out of an 87 mr2 and it's a bigport 7 rib block with 18/40

I know the 2nd gen bigport has the 7 rib block but i'm still confused on if they have high comp internals or not.

I've yet to see any autocross threads around that got as big as the one on the old forum, so mabye we could start one here... FAQ 2014 SCCA solo rulebook Former thread on old Club4ag I'm getting my car prepped to run in dallas on the 24th. Still needs about 1200 more miles to go untill its fully bro...

Who would swap a 3A in there? Wait, where do you even get one!? +1 Didn't tercel's/starlets come with 3a engines? i know one gen of them came with a 3a in america, but how he got a 3a SVC is beyond me. Mabye it was in some cali tercel/starlets and someone needed an engine to be emissions compliant....

Haven't replied in a while because of silly crap that keeps popping up preventing me from working on the car. So far everything's working much better than it was, there was some lean out at high rpm/ high throttle but after researching for a bit I found out where the air correctors were for these ca...

After going back to look at the axle code and doing a bit more research, it looks like I have a T382 dif. The pinion nut was also painted purple, not blue as I originally thought. I'm definatly going to have to change that final drive.

Picked up a rear end from a 1985 celica GT (not IRS), the axle code on the plate said T283, which SHOULD be 6.7 inch LSD, but I'm confused as there's no LSD oil plate( i know it doesn't mean much) and I thought only the celica GTS came with LSD. Also, the pinion nut is painted blue, I cant remember ...

Well as long as it is drivable it should be good, once you get you fuel leak fixed go out and drive it. Because the AFRs will be different with load on the motor. The usual way with these, you do the mains first then work your way to the needle settings. And the lift off "richness" is nor...