Search found 345 matches
- Thu Aug 27, 2020 1:32 am
- Forum: TECH: Corolla FWD / MR2
- Topic: Aw11 Headlight Earth Point LHS
- Replies: 0
- Views: 6700
Aw11 Headlight Earth Point LHS
Hi, I desperately need a photo of where the headlight/horn ground point is on the AW11 MR2. Apparently it is on the left hand side below the pillar. I have a UK car. My headlights and horn do not work at all. My dash lights stopped working but this was down to the other ground getting a bit rusty an...
- Thu Jun 18, 2020 10:19 pm
- Forum: 4A-GE Engine Parts
- Topic: 4age large port head
- Replies: 2
- Views: 8737
Re: 4age large port head
I've got two heads available but I'm in the UK.
One largeport from NA and other from GZE.
One largeport from NA and other from GZE.
- Mon May 25, 2020 3:26 pm
- Forum: Want to BUY (seeking sellers)
- Topic: WTB: 4AGZE ECU
- Replies: 9
- Views: 8230
Re: WTB: 4AGZE ECU
I have an ECU for the AFM 4agze charger from the MR2.
- Tue May 19, 2020 2:35 pm
- Forum: 4A-GE Engine Parts
- Topic: Rare 4AGZE Parts
- Replies: 0
- Views: 7063
Rare 4AGZE Parts
Hello, After getting my car working I bought some parts which I didn't actually need and they cost me a considerable amount of money, so I am looking to get get back what I paid... 4AGZE 16V AFM ECU - £300 plus postage AGZE 16V AFM DISTRIBUTOR - £320 plus postage 4AGZE 16V AFM - £175 plus postage I ...
- Mon May 18, 2020 5:59 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
It was the ignitor. Problem fixed.
I now have a spare gze afm, ecu and dizzy.
I now have a spare gze afm, ecu and dizzy.
- Wed Feb 05, 2020 5:58 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
I've changed my ECU and the loom and they are still not firing!
- Sun Dec 01, 2019 3:32 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
I've bought the spare ECU and in the process of fitting the replacement loom.
So hopefully fingers crossed, she'll fire straight up!
So hopefully fingers crossed, she'll fire straight up!
- Sat Nov 30, 2019 12:46 pm
- Forum: 4A-GE Engine Parts
- Topic: AC bracket 4AGE 16V RWD
- Replies: 4
- Views: 9751
Re: AC bracket 4AGE 16V RWD
Is this any different to one I removed from my aw11 mr2 gze engine?
If there isn't, I have one.
If there isn't, I have one.
- Thu Nov 28, 2019 2:12 am
- Forum: 4A-GE Engine Parts
- Topic: 4AGZE 16v Pistons
- Replies: 0
- Views: 5590
4AGZE 16v Pistons
Hi, I have for sale my surplus 16v GZE 8:0.1 pistons removed from my old engine. I replaced these with the later 8:9.1 pistons. They come with a set of rods which are mismatching as I found this out when I rebuilt my engine. I do however have another set of matching rods from my '89 4AGE 16v which a...
- Thu Nov 28, 2019 2:01 am
- Forum: 4A-GE Engine Parts
- Topic: WTB: AW11 4AGE OR 4AGZE HEADER
- Replies: 4
- Views: 11595
Re: WTB: AW11 4AGE OR 4AGZE HEADER
I have a stock manifold for the 4AGE but located in the UK
- Sat Nov 16, 2019 12:42 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Righteo I've now got new problems! The replacement loom I had all my old connectors soldered onto as it came from a track car is complete. Now, after extensive electrical testing with my mate who has now qualified as a master head technician, has discovered that I also now have no spark. I had spark...
- Mon Oct 07, 2019 5:24 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGE 16v no injector pulse
- Replies: 29
- Views: 39123
Re: 4AGE 16v no injector pulse
this all very similar to my problem!
- Sun Sep 29, 2019 3:20 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hi all,
Small update.
I've installed a replacement loom and got all connectors back on now except for the alternator earth and starter connectors.
I tested for voltage on the injectors and I have 12v on power and 0v on earth as I should do.
Can someone remind how to test the earths e1 e01 and e02?
Small update.
I've installed a replacement loom and got all connectors back on now except for the alternator earth and starter connectors.
I tested for voltage on the injectors and I have 12v on power and 0v on earth as I should do.
Can someone remind how to test the earths e1 e01 and e02?
- Thu Aug 01, 2019 4:22 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hi all, It's been a while and I've had no motivation to do anything with the car. I have the loom off and decided to trace the injector lead grounds back through the loom. Seems I have them grounded in pairs and not as the multi-meter stated of having 3 on one ground and 1 on the other ground. The l...
- Fri Jun 28, 2019 1:41 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
the top cover flagged for some reason so I went and looked, both my 88 an 89 GZEs are green 88gze https://i.imgur.com/siIElC8.jpg It's interesting that it's on the GZEs but my fuse box is from my car which is originally N/A. Very strange. But thank you all for your comment - I shall not worry about...
- Tue Jun 25, 2019 4:51 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
I'll have to do that once I've got the loom back on as now it's all off. Just one thing though...my fuse box cover from the engine bay fuse box, has '10a INJ' shown, but in the fuse panel itself there is no connector for a fuse in the casing. I do hope this is not the reason why it hasn't been worki...
- Tue Jun 25, 2019 8:32 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
I've bought a replacement COR but I doubt that'll be it. We checked to make sure I was geting fuel through by undoing the nut on the fuel filter and obviously fuel went everywhere when I cranked it, so it shows the pump is pumping. The fuel lines are hardlined and there are no kinks so it cannot be ...
- Tue Jun 25, 2019 5:15 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hi all, Had a recommended mechanic round and checked through everything. The cam and ignition timing is all okay. Checked HT leads, dizzy, dizzy cap, injectors, AFM etc It runs on easystart and even when the spray is taken away, but dies after 30 seconds or so. Cannot pinpoint the cause of why it wi...
- Fri Jun 21, 2019 8:33 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
From memory on my car before I changed the engine to 4AGZE, the resister pack bracket was bolted underneath the ignition coil bracket so they were earthed at the same time.
- Thu Jun 20, 2019 2:10 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hello, I've replaced the square plug that goes from the engine hook to the strut tower, as I found it didn't do anything. At the time I didn't realise my intake earth wasn't working, so I replaced it with a ring connector on some 4mm cable and put that straight to the strut tower nut. It probably wa...
- Thu Jun 20, 2019 5:02 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Regarding my relocation of my E01 and E02 onto the intake ground point...I connected the original wires back up last night and I heard it click but it wouldn't turn over. It's odd as my E1 is connected via the original ground point on the inlet manifold, but the E01 and E02 won't let me fire the eng...
- Thu Jun 20, 2019 1:09 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
However, 3 of my injectors do earth back to pin10 and the other pin20 but they are wired in pairs on the power from the resister pack. Had a think about this and it is not ideal. The one injector will be getting a bit more current, and the three will be getting a bit less. Doubt if it is enough to ...
- Thu Jun 20, 2019 1:06 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hi all, How bright should the noid light flash on the injectors? When I tested 1&2 there was a little flash but nothing like the whole bulb illuminating. I do have a replacement wiring loom now, but due to it's cost I have to splice my alternator, starter, knock sensor and dizzy plugs onto it, a...
- Wed Jun 19, 2019 2:08 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Hi, This is not at all sorted. I reattached the wires on the ecu plug and the car didn't attempt to turn over. Put new earths back on and it fired up then died. Bridged the ports in the diag box and the car ran for longer but then spluttered and died. So is that AFM, COR and fuel pump? Took TPS off ...
- Wed Jun 19, 2019 8:48 am
- Forum: 4A-GE Engine Parts
- Topic: Random 4age stuff
- Replies: 4
- Views: 7260
Re: Random 4age stuff
Rogue-AE95 wrote:Do you have the bracket that goes from the MR2 exhaust manifold to the block? Should be an L shaped piece.
I have one of those.
- Wed Jun 19, 2019 2:33 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
It's pretty stupid to be honest. I tested for continuity between E02, E01 and E1 on the chassis and found I had an open loop. At the time i determined there must have been an issue with the wires in the loom. As I had already put the rail back on again I couldn't be bothered to strip it all again, s...
- Tue Jun 18, 2019 2:06 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Sounds like an issue I had with one of my AE86s. Check the fuel circuit in the AFM. Try jumping the fuel test circuit at the diagnostic port. If the engine runs by jumping the fuel circuit then check the ground at the AFM plug. This is the ground bolted to the manifold, top of the runners under the...
- Mon Jun 17, 2019 3:17 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
It now fires up! It was an earth problem and I fixed it in a different way but won't go into that. So thank you for everyones help and advice and apologies if I did not seem gracious because I am! Now, the next problem! It runs for 5 secs then dies- i'm assuming this is the AFM? I don't have my thro...
- Fri Jun 07, 2019 1:39 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Yeah lol it's going grey though due to my twin boys. I have wiring issues though through the reasons I cannot explain.
- Fri Jun 07, 2019 8:13 am
- Forum: TECH: 4A-GE ENGINE
- Topic: 4AGZE Injectors Not Firing
- Replies: 108
- Views: 92134
Re: 4AGZE Injectors Not Firing
Just an update for you all, I have an earth problem.
More ecu earth problem.
More ecu earth problem.