Are any of these oversized Pistons?..

Would you sell the the t3 outer tie rod ends only?...

Selling my previous engine management setup including the harness will include Megasquirt ms2 ecu powers on but I couldn't get it to connect to my laptop Engine harbess for a ae86 sr5 chassis to connect to a 20v engine The wire harness needs some work because everything is pretty messy but all the c...

Long story short, my fuel pump went bad and i replaced it with a 255 walbro(which was probably a mistake) and now im losing fuel pressure when i turn off the car. I had the injectors cleaned by rc injectors thinking one of the fuel in jectors was leaking but im still having the same issue after inst...

Thanks for the link, seems to me that it works, would you recommend a vacuum block to run off that and feed the map and brake booster?.... Also a bit confused that they mentioned to leave the intake side open to the air but with a filter on it?.... Any way you can drop some knowledge about tunning w...

So much info on the post, I wish I could understand it all:/
I'm having my car tuned soon and I'm running ms2 on a silvertop 20v with edis
Any advice to my tuner, he hasn't tunes any engines with itbs before nor vvt
But he's the only tuner that I know of that has tuned other cars on ms

hi guise i have a 20v st running megasquiert ms2 and im just wondering what the proper way for the map sensor to draw vacuum from the engine would be. ive looking around the webz and found this setup http://www.midrear.net/images/projects/ ... mtank2.JPG he drilled two holes on cylinder 2 and 3 of t...

Im interested in the bezel if you still have it.

Need help on making my car run smooth, So far I'm having major loss of power below 2k rpm with a bit of bogging And hesitation issues. Back fires occasionally as well as th rpm dropping to 0 and picking back up when I hit 3300 rpm, doesn't happen all the time but it happens a lot more often now for ...

Is the megasquirt setup, really that bad, what a good alternative that won't burn holes in my pocket, it seems overkill but it's all I have so just gonna stick with it.

Price for complete rear end with calipers and brake lines with prop valve?...

Hey guys I'm new to this forum since I just got my first 86 last week, it's a sweet ride with a nice 20v but it's needs a tune badly, right now it has stick silver top with silkroad headers and open throttle bodies equipped with a megasquirst ms2, if anybody knows a tuner around the LA or IE area wh...