Hi guys;

I just got the Gt2871r turbo from Twist Motion. This turbo is design for the Nissan S13. Which exhaust manifold is your recommend (top mount or low mount). Also, which brand ? If I go with top mount, so do I have to relocate the inlet?

Thank you guys very much. I will do more research. If I still have questions I will post on forum.

What compression ratio? 9:1 What kind of fuel will you be using? I don't know, what is your recommend? Stock cams? Yes I followed the manual, but like I said, this is my first rebuild and assemble, so I am not sure 100% right. Is there anyway to check before put the car on dyno? Should I bring it to...

Hi guy; I know this is dump question, but I have to ask for some advises. I am building 4age 16v turbo, this is my first engine that I have been assembled. I spoke to a technician near my house, and he told me that it very easy to blow the engine. Below is what I am putting into the engine; 1. Arias...

Does anybody have idea about Twist Motion GT2871r V2 turbo? This is the turbo that I have been found for good price and good quality so far. I called them, they said turbos are assemble and inspect in USA. Unit comes with 1 year warranty.

I am using Arias 8:1 piston with X beam connecting rod, 7 ribs block, stock cam, stock valve. What a cheap turbo that you can suggest me to buy to reach my goal?

Thank you Yoshi. My goal is 300 whp, people told me that T3 turbo is too big for 4age. Please give me some advises. To reach my goal, should I go with T28 or T3 turbo?

Hello everybody; I am looking for a T25 or T28 turbo for my 4age, and I found a guy that have a Garrett 14411-40P18 (300zx turbo) for good deal. Do anybody know what size of this turbo (T25 or T28). Is this turbo can be mount or use on the 4AGE? Which turbo size that you think is the best for 4age? ...

Hi everybody;

I took the head out already, and there are 10 long head bold still in the block. It seem like really tight to take out. Please show me how can I take them out before I can give the block to machine shop.

Thank you very much.

Thanks a lot Yoshi. I have one more question: I have 7rib block 4age already. The cost to buy a new set of Pistons is $6oo to put in my 4age. Some guy offer me a 4agze engine pull out from his running AE86 for $650 without knock sensor, oil cooler, oil pressure sensor EGR, water tempsensor, rwd wiri...

Hello guys; Finally, I just done disassemble my 4 age. I want to ask for your opinion. My goal is 250-300 whp. A lot of people told me that it cost a lot of money and risk to do 4age turbo because 4age is not design for turbo. They told me to go with 4agze or 3sgte. It cost less money, risk and will...

Thanks a lot guys. Can you let me know which Pistons can I buy for the low compression? I don't want to spend a lot of money, I just need the decent one. Do I have to buy the connecting rod or just the piston? My goal is to get up to 250 HP. With that HP, do I have to change the bigger injection an...

Thanks a lot guys. Can you let me know which Pistons can I buy for the low compression? I don't want to spend a lot of money, I just need the decent one. Do I have to buy the connecting rod or just the piston? My goal is to get up to 250 HP. With that HP, do I have to change the bigger injection and...

Hello everyone; After took out the engine and did the research, I believed I have red top and 7 rid block. My goal is put T3 turbo and run around 8 to 10 psi of boost. Some people said that I can use the stock pistons and connecting rod with 8 to 10 psi of boost. What is your recommendation? If I ha...

mideng wrote:Get manual first. Read and read again. It's not brain surgery. Be careful with machine shops who do not have know prior knowledge with 4ag.

You can do it all in your room or garage. I built five engines in my closet. I used all junkyard parts.

Used toyota oem gaskets!

Thank you very much

Thank you so much guys. I will do my research and if I have questions I will post it. I think I need to go step by step.

Hello everybody; I have a 85 corolla with 4age 16v, and I am planning rebuild the engine. This is the first engine that I will be rebuilding, so I have some questions. 1. Do I have to buy a rebuild kit or I can wash and re-use the original parts (just change to new gaskets)? 2. I plan to put turbo i...

hi all members, I have 85 Corolla GTS. I am looking for a set of wheel but I dont know what size and offset should I get. Which one is look good on my car. I want to look flush (wheel stick out for look) but I don't want to use flare. Please help me find the right size. Thank you very much. 15x8 et...

hi all members, I have 85 Corolla GTS. I am looking for a set of wheel but I dont know what size and offset should I get. Which one is look good on my car. I want to look flush (wheel stick out for look) but I don't want to use flare. Please help me find the right size. Thank you very much.

Im looking for seat slides and bracket for driver and passenger. Text me at 714-261-7219.

Im looking for seat slides and bracket for driver and passenger side. Need to fit with the Bride bucket seat. Text me at 714-261-7219.

thanks man.

carbd7age wrote:Holler at witz in the stores n shops section. He stocks em all.

sorry man, I don't understand what you say. how can I find the stores? thanks

HI everyone
Can someone show me how to adjust the e brake for the 85 corolla? the e brake go over 5 clicks.

Hi everyone
I'm looking for bucket seat for my 85 corolla (Bride, Sparco, Recaro). USED OR NEW. Please call or text me at 714-261-7219.
I located in OC.

Hi everyone
I'm looking for bucket seat for my 85 corolla (Bride, Sparco, Recaro). USED OR NEW. Please call or text me at 714-261-7219.
I located in OC.

Hi everyone,
I want to buy NRG hub and quick release for my 85 corolla. It doesn't matter Used or New. I located in Orange County.
Please call or text me at 714-261-7219 or email me at danhthanhtruong@gmail.com
Thanks.

Hi everyone,
I want to buy NRG hub and quick release for my 85 corolla. It doesn't matter Used or New. I located in Orange County.
Please call or text me at 714-261-7219 or email me at danhthanhtruong@gmail.com
Thanks.

thank you Mike! you are my hero . My friend weld it for me, everything ready to do, my job right now is cut metal and buy a lateral rod.

hahaha I never drift before. I think after this I will ask you some techniques for first time drifter. Don't worry man take your time.