It's a long shot but is this still available?

I think a location would be a good thing to add... FREE BUMP

Bump for quick email responses! Glws dude

@gaijin_rokurunner

Do you mind loading some pics of your spark tables and fuel tables?

ahhh gotcha! learn something new every day

Once I file my taxes and get my money back I decided I'm going to go Megasquirt MS3x. I know everyone has there budgets and preferences, on ECU's but this is what I have already decided. I have done my research, with the expansion board you can run an extra VR sensor input. Meaning we can use our st...

Yep my wording could have been a little off. However doesn't the 4AGZE use a MAF?

OK, fair enough. The OEM MAP sensor from a 4afe and 7afe has worked for me and many others.

Blacktop Oil Pump: 15100-19045
Silvertop Oil Pump: 15100-19036

Technically it will bolt on fine but you will need silver top, red top, or blue top timing tensioner set up. Hope this helps

I run a 200mm Fidanza Flywheel and OEM organic Exedy clutch. The set up works for me with no quirks, I always tell my friends I'd rather replace a clutch disc than a transmission... You will notice quicker engine response, whether decelerating or accelerating. I think it made it easier for me to dri...

I think I may have cross referenced it to a turbo mr2. I'm pretty sure any 4 wire o2 sensor that will plug in will work. I believe almost all of the 4 wire heated narrowband o2 sensors work the same!

Check to see if your injectors are squirting, As well

My guess is timing is off. The stock 20v ecu is very picky and all it's vital sensors plugged in and working.

I don't have the part number on hand, I'll see if I still have the box when I get home. However I used a 4 wire Bosch o2 sensor from autozone and plugged right into the harness and never had a check engine light.

Yep no problem man! Good luck! With your swap

That t3 pulley has been on the market for ages. EMS have evolved a lot since then. Here is another source stating there is a cam signal input (vr) and a crank signal input (vr) only on the ms3x though! For the wiring harness and ecu you will be looking at 717+ shipping! http://ms3efi.com/product.html

I was in the same boat as you not too long ago, I eventually pieced a fully rebuilt long block set up for less than I would've payed from an engine importer. Their are always guys going bigger and better than a 20v here on the forums. Check the classifieds, at least you're buying direct from a perso...

any map sensor from an A series engine will work. For example i went to the junk yard and got a map sensor from a 1996 Toyota corolla with a 7afe plugs rights in and works!

MS3x can run sequential ignition and sequential injection off of our stock distributor, I believe. Can anyone confirm this? I believe we have a 24/1 nippondenso CAS. 24 no missing teeth for crank speed and 1 tooth for cam speed? Not sure if this is thread jacking but this can help everyone that want...

http://i358.photobucket.com/albums/oo26/yellowscionxb/FEEE4C64-175C-42B0-A651-DE93621EBDF4-590-00000049D9DFF343.jpg It's the wire on the 22 pin connector (second biggest) on the top left. you basically run a wire off the starter switch wire to that wire on the ecu. It only needs to see that the car...

Did you hook up the STA wire to the ECU? Without that wire it causes bogging. Anyone correct me if I'm wrong, I believe that the ECU is on but only wakes up when it see's this STA signal wire. Like when you log off a computer, technically its on, its just not fully functioning?

Have you looked into Adaptronic? I think I will be going MS3x myself. Adaptronic is self learning and uses all oem toyota sensors.

Good prices. Bookmarked for future reference

I can vouch for this guy as well!

Very nice looking wheels and your own offset's differ will differ from the guy down the road

Good stuff! Man what's with club4ag always going down wanna see one of these lips mounted! Anyone?

Wow... I have been off this forum for like a month, and come back to this

Can you email me coupeae86@yahoo.com I have some questions about the stinger ECU