75-90 or 80-90 gl-4 or gl5

Thanks for the reply man. I already bought the same setup as you but my car is in pieces right now. I'm going through the rear end installing a new flywheel and clutch and replacing almost all the seals. I'll post pics when she's Rollin.

Thank you sir!!! I'm new to carollas and everyone seems to be extremely helpful here. Much appreciated.

Are the front main and rear main seal for 3rib and 7 rib bottom end the same? Thanks

ThAnks for that diagram

Is there a way to block off the egr

http://racetag-exhaust.com/Toyota_4AGE_Drift_Header



How are these? And do they have the bung for the egr?

Sorry forgot to mention I've removed all of that it just seems like I have to raise the engine to get it out

Help removing the powers steering rack on my 86 I'm swapping it out for a manual rack. I have the rack mounting bolts out but it's so tight in there it looks like i need to raise the engine a couple of inches to get it out. Any suggestions.

I just received some kyb front upper strut mounts for my 86, the car currently has tein front camber plates. I thought that I could use the new kyb strut mount bottoms that sit on top of the springs but its a one piece unit so my ? is do the teins camber plates come with the upper strut mount piece ...

I have a red top bottom with a blue top head but that's how I got the car and I've never had an 86 so I have nothing to compare it to. All I know is the car is slow as **** compared to the b16 powered civics I've been playing with for years, but the balance of the 86 is amazing and the car is so muc...

I found a mr2 at the salvage yard for 37 bucks

Thank for all that info man I apreciate it.

Will they work if my cars only lowered 1.85 inches

Are camero shocks on the rear of a 86 better? If so what specific model of camero shocks will bolt up to my 87 gt-s?

Thanks man got six of eight off the last two have destroyed a impact socket and a 3/8 snap on so ill try again tomorrow.

Nevermind

4age 16v

Righty tighty lefty loose

221 dollars at autozone.

Hey ? I'm trying to remove my flywheel are they oppiste threads or righty righty lefty loosie

I can get a manual rack at autozone it's a reman. My ? Is what else will I need for a power to manual conversion.

Ya I can't believe someone would cut trd springs

When the cars jacked up lol


Not xrs

There cut so much that when the xrs jacked up wheels of the ground u can move them side to side by hand

Bored so I thought I would throw a vid up!!
This is the first time I had driven an 86 days after towing home and tossing in a radiator an some other miscalanious stuff.
http://m.youtube.com/watch?v=bSHQok0I0I0

That car is bad ass and smog exempt

Nice its looking like 195's

Awesome than for the feedback guys! What size tire are you running on those Celica wheels I have a 87 coupe sitting on the same wheels I'm trying to decide if I want 195's or 185's. nice car man it's clean.

Megan lowering springs are they any good? money is tight and I'm dying to get my gts on the road. The last owner cut the trd springs and it rides terrible.