Man... great link!!!

Yeah... I've seen theirs and its nice... but thought of T3 (price), was just concern about the balancing.

Thought of putting VVT back on. Was not sure if I should.

Once I put the spark system it got better since I was running rich. About 13.5 but needs to be tuned (coming up this week)

Have you thought of using the AEM EMS-4? I have been thinking about it but don't know anyone running it on a 20v.

http://www.tweakdperformance.com/online ... ucts_id=33

Hey, how is that working out for you? I always wanted a pulley but afraid it will throw off the balance and mess it all up.

Hey guys, Thank you all for advice... I ran short on funds (sucks have 3 toys). This is where I am at now: M.D.I. Multiple Discharged Ignition System, 20v BT (with bad ass plug wires) Freshly rebuilt (all seals, rings and bearings) Crower Rods Swift jp valve springs TRD .8 head gasket Tomei PonCams ...

if it does not work out, let me know. Interested in both if you have them.

I've got it advanced at 20. I have never been past the 900 but it was a concern that it operated that high.

My layout is about the same, but I am running NA and hitting between 780 and 900.... Thanks yoshimitsuspeed

Hey guys,

Does anyone know what temp should EGT be at in a 20v? I've got timing advanced and wideband is indicating a great mixture but the temp seems to be a bit high.

[quote="SHOP for a tuner FIRST!!! Look around YOUR town, or local area for a shop who tunes for a living. Find out what they have a LOT of experience tuning. Even if you plan on tuning it... just to COVER YOUR BUTT... do a bit of research and add that as one of the criteria to what system you d...

I have a wideband and egt gauge so this is how I can tell it has not changed. But if you can go stand alone... that is the best option. I am in Costa Rica so unfortunately I don't know many people that can tune stuff.

Hey guys, My build has poncams, toda pulleys, fuel pump, fuel regulator and M.D.I (ultra, Multiple Discharged Ignition System) and MSD coil. I am running the Ultimate and to be honest, I have not see it change the settings. My car does get little use but I drive it about 1 hr total per week on the s...

Excellent... thank you

Hey guys,

Haven't heard much about these. Anyone used one of these on the 20v? Did it help?

http://www.ebay.com/itm/171219646997?ss ... 1497.l2649

Hey guys,

Got a few toys on my BT but still running the stock BT header. Anyone with a nice FWD header for the 20v. or an aftermaket AW11 header?

Tks

burdickjp ... thank you for the info... I'll be looking into going this route soon

Never thought of a C60... I used to have a 03 corolla and I destroyed that one but came up with a solid build between that, a celica GT's trans and a C52 a while back. Will check it out. I don't have much on suspension it is in good condition. Polyurethane bushings, Kayaba 4 way adjustable shocks, E...

Thanks gaijin_rokurunner... I've got a fair setup with suspension and will be doing some weight reduction with on the car with carbon fiber (not into carbon for cosmetics). I would like to put down 170 to the floor. I have been checking into the C60 but just having a hard time getting one in Costa R...

You got it MisterJerk...
http://www.crower.com/index.php/connect ... -2592.html

Burdickjp... Thank you, does make sense

gaijin_rokurunner I ran into problems with my built... turns out that the guy in the forum that sold me the cams did not tell me that these were not even close to being a matching set and never run them himself. Bought from Costa rica so I was screwed and I found out when my engine has apart at a sh...

Hey guys... so I live in Costa Rica and found out that someone has 4agze (as advertized) Crower rods for sale. It took me a while to find the ARP bolt part number because I know the two that brian crower uses but happens that these are not Brian... they are Crower... All good but two things... 1. I ...

Thanks man, will keep that in mind. The cams I got are about 9 lift... I figure that big power was above that but I do not want to loose too much of the drivability. I bought the guides because I am blowing old and the guys said that seals do alright for a bit but that guides tend to wear about and ...

Hey guys, So I have been buying and storing parts for a long time to try to get a bit more power out of my BT but I have reached a point that I will need advice and thought I can get some from you guys. About a year ago I bought a 20v bt for my AW11. Runs strong with the exception of some smoke that...

interested in the HKS TwinC as well.
ticotek@yahoo.com