But would this cause it not to rev over 4K? I tried using another Ecu but it’s like it’s going into limp mode.

I am currently working on an AW11 mr2 with. Rebuilt 20v blacktop that I just installed. It wasn’t revving past 4K before build and had a busted head gasket. After installing it still won’t rev past 4K. Changed ECUs, changed igniter, unplugged VVT. I’m don’t know what I’m missing but I’ve checked eve...

I am trying to find out about the classifications for the Improved Touring Class for SCCA. I know our cars are in ITA but can a ae86 levin's with blacktop still be in the same classification? I want to make sure i'm doing this right before i get too deep in the build. I just got back from VIR this p...

Need to buy a blacktop 20V head. Let me know what you have and how much shipped to Raeford,NC 28376.. Thx

Like the title states. I need a blacktop head with cams and cam caps. I don't need cam gears or the valve cover. Let me know what you have. Zip is 28376, NC

Thanks...Yeah I guess when i was taking the motor out and disconnecting connectors it just gave way just a bit. I'd test and give each part a good cleaning before i replace parts. It was all working before i took it out so i figured it was a ground or some wiring somewhere not connected. I think i w...

So this took me a bit to figure out. I was moving the wire loom in the engine bay by the intake at 1st and it was clicking so i ended up undoing all the electrical tape and check all the wire. Crimped all the wires in my hand to find the short till i got to the dizzy side. thought it may be the alt ...

So Jondee86, I think i've found the problem> As i had the key in the start position i was moving the engine wiring harness and i heard a clicking noise. 1st i thought it was the tape rubbing but i did it a few times and i think it may be a broken wire in the loom. I'll let you know what i find.

So as per the service manual i tested the EFI main relay and COR. Both have continuity with the checks and properly function. Next i went to turn the key to start w/o pushing in on the clutch and the fuel pump activated. i did this twice. Took the key out then waited 5 mins inserted the key and did ...

Thx jondaee86. I might have used the wrong wording for fuel priming. if not pushing in on the clutch and just turning the car over you should hear the COR click and the fuel pump activate. I hear the Click but no pump activation. 1. COR clicks when i crank 2. I don't hear the COR click if on either ...

Rundown of car: 1985 toyata corolla gts(lift back) Stock build So after i have rebuilt this motor i go to start the motor. It runs all the way till it's warmed up and then a little bit after that it died. Next day did the same thing but this time i restart the car and nothing. checked ground find th...

Like the title says i need to get the intake camshaft and the no.5 bearing cap that the camshaft sits on. Let me know what you have and price..thx

I new a good working rear passengers side brake caliper.

Header has been sold

Bump ttt

Needing a camshaft and camgear for my 20v blacktop. Bent my valve . Shredded the gear and scored the camshaft. Need one now. Thx

bump ttt

bump

Shoot me an offer on the parts. Shipping not included. TTT

While in the proccess of getting my project back going to get the timing right i'm sure i bent my exhaust valves today. let me know asap

bump ttt

bump ttt

anyone have these? I'm still needing them

Thx morgan. Let me know

Hey max, there one place that you can pick and pull and it's 2 hours away. He dosent have them. Already checked

Looking to get he 2 coolant connectors with pigtails. I have arrows pointing to 2 I need. Let me know what you have and price Shipped to 28376. Thx

ok. thx for the info

Been string to search but have found nothing. I have a 86 sr5 I swapped a 20v blacktop which will run a MS2 system. I'm just needed to know if all I need to do to make sure the plug is a gts alt plug is extend the wires. Anyone done this before or can give me a little help? Thx

bump ttt

replied to your PM

bump ttt...need to move this stuff