MR2 Steering Rack Problem

guateracer1
Club4AG Enthusiast
Posts: 54
Joined: Fri Jan 31, 2014 7:21 am
Location: Rhode Island

MR2 Steering Rack Problem

Postby guateracer1 » Tue Nov 13, 2018 5:11 am

How's it going I just recently did a mr2 steering rack conversion. The issue I ran into is that my wheels are extremely toed with my outer tie being adjusted out all the way. I'm running BC coil overs with there rcas I did Rockauto Power steering Inner and outer tie rods, MK3 intermediate shaft, adapter bushing from excessive . I ordered a different sent of power steering inner tie rods and same thing they are the same as the ones install on my rack now. So I'm at stand still don't know what to do any suggestions or advice would be much appreciated

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


User avatar
morgan
Club4AG Pro
Posts: 864
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: MR2 Steering Rack Problem

Postby morgan » Tue Nov 13, 2018 9:35 am

you need manual inner & outer tie rods
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

guateracer1
Club4AG Enthusiast
Posts: 54
Joined: Fri Jan 31, 2014 7:21 am
Location: Rhode Island

Re: MR2 Steering Rack Problem

Postby guateracer1 » Tue Nov 13, 2018 10:12 am

morgan wrote:you need manual inner & outer tie rods


I read all over the forums that you need power steering inner and outers though?

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: No registered users and 9 guests