toda 264 10.3 lift vs hks 288/272 10.lift

killercam
Club4AG Enthusiast
Posts: 140
Joined: Sun Jan 27, 2013 7:44 pm

toda 264 10.3 lift vs hks 288/272 10.lift

Postby killercam » Fri Jan 05, 2018 8:09 am

need help with my set up cant decide which ones to go with for a street car im running old school hks supercharger
can anybody give me advice on this set up pistons 10.5.1 20v block aftermarket rods also.
toda or hks all valve train has been upgraded,

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: toda 264 10.3 lift vs hks 288/272 10.lift

Postby oldeskewltoy » Fri Jan 05, 2018 10:53 am

What management?

What static compression ratio? Whoops 10.5:1

HKS supercharger similar to SC12, so it won't benefit from an engine that spins over 8000 rpm.... I'd stick with the Toda 264 cams. Just make sure you don't have an interference issue with either cam - they both are tall enough that the head may need to be worked to get the cams to actually rotate
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

killercam
Club4AG Enthusiast
Posts: 140
Joined: Sun Jan 27, 2013 7:44 pm

Re: toda 264 10.3 lift vs hks 288/272 10.lift

Postby killercam » Fri Jan 05, 2018 10:59 am

thank you for the info, also will be aem ecu.

Davegt27
Club4AG Enthusiast
Posts: 138
Joined: Thu Jan 10, 2013 10:35 pm
Location: co

Re: toda 264 10.3 lift vs hks 288/272 10.lift

Postby Davegt27 » Fri Jan 05, 2018 4:23 pm

the post is deleted
Davegt27 Code One Racing