Clutch selection help

Noisy 4age
Posts: 1
Joined: Fri Sep 01, 2017 5:03 am

Clutch selection help

Postby Noisy 4age » Sun Sep 03, 2017 9:41 pm

Hi Guys,

I have an Australian AE93 SX Seca with 4age and am looking to get a lightweight 200mm flywheel and clutch for it (they come with 212mm).

Xtreme list my car and the ae86 as having the same gearbox shafts. 21 spline, 23.8mm OD. All 4age flywheels are swappable so the 200mm kit should fit right?

Can anyone confirm that they actually are the same and the 200mm and 212mm clutches can be interchanged and it will fit on my box?

What about throwout bearings?

Thanks fellas,
Alex.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


taroroot
Club4AG Enthusiast
Posts: 95
Joined: Mon Jan 14, 2013 10:04 pm

Re: Clutch selection help

Postby taroroot » Fri Sep 15, 2017 9:08 pm

You should be able to use either flywheel, but 200 clutch with 200 flywheel, 212 clutch with 212 flywheel. Can't interchange 212 clutch with 200 flywheel, or vice versa. Any reason why you want to go with 200 flywheel? Outer diameter is the same. I went to blacktop flywheel, which is 212 and then switched to Exedy hypersingle which is application listed as last gen Celica.

Gino1X1
Club4AG Enthusiast
Posts: 124
Joined: Wed Jun 05, 2013 10:59 am

Re: Clutch selection help

Postby Gino1X1 » Wed Sep 20, 2017 11:59 am

Well, since you're from Australia I would look up this site as they for the most part has gone through your dilemma.


http://forums.toymods.org.au/index.php?t=msg&th=56278&start=0&rid=204&S=06d0c4ed93321a412a9cbed6c614d82b

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla FWD / MR2”

Who is online

Users browsing this forum: No registered users and 4 guests