Has there been an 80/90s Toyota with a special pin stripe ?
I'm wanting to put something on my old Starlet but not sure what. I like the way ford used to do it on cars like the MK1 Fiesta XR2 and also the special touches like the faded bonnet decals on the RS 1600i
This is what I've got do far, don't think I like the red pin stripe from front to back, I'm feeling something a bit special in black
Pin stripe suggestions
- grappletech
- Club4AG Expert
- Posts: 344
- Joined: Sat Jan 12, 2013 12:13 pm
Re: Pin stripe suggestions
I personally think pinstripes look good on some rollas..... Have to be super careful though. One wrong stroke and you might as well add flames
87 GTS Coupe stock and Super Duper Clean
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
87 GTS Coupe Beams 3sge (under construction cuz I'm slow and lazy and broke-FML)
87 SR5 Coupe Shell. (Sold)
86 SR5 Hatch Shell
86 GT-SR5 Coupe 20v Swap
Re: Pin stripe suggestions
Maybe do something like this ? The accenting of the wheel arches is very
old school, but has come right back into fashion in recent years.
If you chose the right colour and did a thin pinstripe just off the top
and bottom edges of the main stripe, it could look effective
Cheers... jondee86
old school, but has come right back into fashion in recent years.
If you chose the right colour and did a thin pinstripe just off the top
and bottom edges of the main stripe, it could look effective
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
Re: Pin stripe suggestions
That's quite bold :0
My this red highlights are really growing on me now
My this red highlights are really growing on me now
Re: Pin stripe suggestions
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com