Custom Clutch Line for SR5 to GTS Swaps

User avatar
Kitsunami
Club4AG Enthusiast
Posts: 100
Joined: Thu May 05, 2016 11:36 am

Custom Clutch Line for SR5 to GTS Swaps

Postby Kitsunami » Thu Mar 01, 2018 7:37 am

Hey all,

Wondering if anyone has any advice for getting a line from my clutch master to clutch slave on my GTSR5 swap. I have the GTS bellhousing with the slave on the passenger side of the car, and instead of trying to source a tired old GTS line, I was wondering if anyone has some other suggestions for getting from CMC to CSC? I was thinking of running a braided line the whole way, but I can't seem to find a generic line in my searches.

This seemed promising, but I don't know if the fittings will be the right size:

https://www.ebay.com/itm/Clutch-Master- ... 1438.l2649

Let me know. Thanks!

aukword1
Club4AG Expert
Posts: 485
Joined: Fri Dec 06, 2013 6:03 pm

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby aukword1 » Thu Mar 01, 2018 8:57 am

Xcessive manufacturing makes them. This is the one I used for my Beams swap. The fittings are identical on the slaves so this should work.

https://xcessivemanufacturing.com/toyot ... lk-s2.html

davew7
Club4AG Expert
Posts: 232
Joined: Fri Jun 06, 2014 4:34 am
Location: Michigan

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby davew7 » Fri Mar 02, 2018 3:10 am

Any auto parts store will have generic brake line in lengths like 10", 20", 30" etc. Just measure the length from the M/C to the current SR-5 slave cylinder hose attachment fitting and get a GM brake line that is slightly longer then that dim. If you want the bling then go the braided SS line. If you want the hard line to look good than pick up one of the hand forming tools for brake lines, while at the auto parts. Davew7

notnilc20
Club4AG Pro
Posts: 575
Joined: Sun Dec 27, 2015 7:56 pm
Location: Memphis

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby notnilc20 » Fri Mar 02, 2018 8:27 am

Just make your own.... very easy..... here's a vid i made a long time ago on it.....
https://youtu.be/x0IsM360Iag

GooGooMuck
Posts: 7
Joined: Fri Jan 11, 2013 9:59 pm
Location: Tacoma, WA

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby GooGooMuck » Mon Mar 05, 2018 5:09 pm

Good info from both of these guys, I would add be sure to track down cunifer preflared hardline to use. Cunifer is much easier to bend than other metal hardlines and never rusts.

User avatar
gzus13
Club4AG Regular
Posts: 23
Joined: Fri Jan 11, 2013 10:05 pm

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby gzus13 » Tue Mar 20, 2018 7:28 pm

+1 on the Cunifer (also called NiCopp) lines - super easy to bend and flare.

If you want to go with a generic braided hose, you could just get adapter fittings and use a pre-made hose. The clutch should be 10mm x 1.0 inverted flare on both ends (it's the same as the brake lines). A -3AN hose will work fine. Summitracing.com sells pre-made AN hoses in a bunch of different lengths.
88 AE92 Corolla DX, 86 AE86 Corolla GT-S, 73 TE21 Corolla Deluxe

Psalm 91, 2 Timothy 1: 9-10, Ephesians 2: 8-10

http://www.superhachi.com

scalpel
Club4AG Enthusiast
Posts: 121
Joined: Thu May 26, 2016 6:45 am

Re: Custom Clutch Line for SR5 to GTS Swaps

Postby scalpel » Fri Mar 23, 2018 4:08 pm

I think i have an old gts clutch line